Philips Brilliance 190P5EB User manual

Product Information
Product Features
BRILLIANCE 190P5EG/190P5EB/190P5ES
The best productivity solution
zMaximum comfort for maximum productivity
{Just-right positioning with range Super Ergo base
{Display diversity with portrait and landscape options
{Extra efficiency with wide viewing angle
zOutstanding front of screen performance
{Best-ever sharpness and brightness with LightFrameTM
{Accurate color displaying more than 1.3 million pixels
{Displays VGA and DVI signals with dual input
zLower Total Cost of Ownership
{Low power consumption - 20 percent savings than industry average
{Kensington anti-thief lock-ready for added security
RETURN TO TOP OF THE PAGE
LightFrameTM for Windows
Introduction
Philips LightFrameTM feature enriches the experience of pictures and video on a Philips monitor.
LightFrameTM will boost the brightness and sharpness of photos and videos on the monitor
screen.
To control the LightFrameTM feature in your monitor, you have to install the LightFrameTM
application which you will find on this CD-ROM.
Note
Philips LightFrameTM will only work with monitors that have been built to use this software. Earlier
Philips monitors or other manufacturers’ monitors will not work with this special software. It is
recommended that you install this software only on a Philips monitor designed to use it. These
monitors can be identified by the LightFrameTM logo on the front of the monitor.
LightFrameTM will work with true Windows-based programs and DOS-based programs that
operate in a Windows environment. It will not work with DOS-based programs operating only in a
DOS environment.
Language Selection
While English is the default language of LightFrameTM, the User Interface can be set up to operate
in Dutch, French, German, Italian, Portuguese, Spanish, Simplified Chinese, Traditional Chinese
or Korean.
Installation
1. To install LightFrameTM, place the CD in the CD-ROM drive.
Page 1 of 9
Exhibit 3
Installstion and Operating instructions

2. Next, when the menu of items on the CD appears on your screen, click on 'Install
LightFrameTM'.
3. Now, follow the on-screen prompts to properly install the program. The software checks to
see if you have a compatible monitor. You must agree to the license agreement terms for
the software to install.
4. After installation, LightFrameTM automatically loads and the icon appears in the taskbar.
Notes
If LightFrameTM detects that your monitor is not LightFrameTM compatible, a message appears on
the monitor screen. If you see this message, you can select to abort or continue the installation.
However, if you continue the installation, LightFrameTM will probably not work on the monitor.
How to use LightFrameTM
After installation, LightFrameTM starts up automatically whenever the computer is started.
For information about using LightFrameTM please refer to the help information which is available
after installation.
Compatibility
This version of LightFrameTM is compatible with
Windows® 95
Windows® 98
Windows® Me (Millennium Edition)
Windows® XP
Windows® 2000 Professional Edition.
RETURN TO TOP OF THE PAGE
Technical Specifications*
LCD PANEL
• Type TFT LCD
• Screen size 19" / 48.26 cm diagonal
• Pixel Pitch 0.294 x 0.294 mm
• LCD Panel type 1280 x 1024 pixels
R.G.B. vertical stripe
Anti-glare polarizer, hard coated
• Effective viewing area 376.32 x 301.06 mm
• Display Colors 16M colors
SCANNING
Vertical refresh rate 56 Hz-76 Hz
Horizontal Frequency 30k Hz-82 kHz
VIDEO
• Video dot rate 135 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2K ohm
• Input signal levels 0.7 Vpp
Product Information
Page 2 of 9

• Sync input signal Separate sync Composite sync
Sync on green
• Sync polarities Positive and negative
• Video interface Dual input: D-Sub (analog) and DVI-D (digital) are
available and user selectable
• Light FrameTM Brightness and sharpness enhancement
Audio
• Loudspeaker 4W Stereo Audio (2W/channel RMSx2, 300 Hz-12
kHz, 16 ohm, THD=10%, PMPO 32 Watts)
• Headphone connector 3.5mm mini jack
• Input signal connector 3.5mm mini jack
• Stand-alone audio output
Audio output can still function whenever there is an
audio source playing, even there is no video input.
Note: The volume adjustment can not function under
the following conditions:
1. A warning message appears on screen
2. No audio input
Optical characteristics
• Contrast ratio 700:1 (typ.)
• Brightness 300 cd/m2(typ.)
• Peak contrast angle 6 o'clock
• White Chromaticity x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.313 y: 0.329 (at sRGB)
• Viewing Angle (C/R>10) Upper >85° (typ.)
Lower >85° (typ.)
Left >85° (typ.)
Right >85° (typ.)
• Response time <25 ms (typ.)
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors
are calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to
a predefined setting as well as the color gamut. Therefore it is important to select the sRGB
setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the
down button to go to Adjust Color and press OK again. Then move the down button to go to
sRGB and press OK again.
Exit this OSD.
After this, please do not change the brightness or contrast setting of your monitor. If you
change either of these, the monitor will exit the sRGB mode and go to a color temperature
setting of 6500K.
For more information on sRGB, please visit: www.srgb.com
Product Information
Page 3 of 9

* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. If an input from a keyboard, mouse
or other input device is detected, the monitor will 'wake up' automatically. The following table
shows the power consumption and signaling of this automatic power saving feature:
Note: sRGB mode is not available while 'LightFrameTM' function is activated.
• Maximum 1280 x 1024 at 75 Hz
• Recommended 1280 x 1024 at 60 Hz
15 user definable modes
15 factory preset modes:
H. freq (kHz) Resolution V. freq (Hz)
31.5 640*350 70
31.5 720*400 70
31.5 640*480 60
35.0 640*480 67
37.5 640*480 75
35.2 800*600 56
37.9 800*600 60
46.9 800*600 75
49.7 832*624 75
48.4 1024*768 60
60.0 1024*768 75
69.0 1152*870 75
71.8 1152*900 76
63.9 1280*1024 60
80.0 1280*1024 75
Power Management Definition
Product Information
Page 4 of 9

RETURN TO TOP OF THE PAGE
Physical Specifications
* This data is subject to change without notice.
* Resolution 1280x1024, standard size, brightness max., contrast 50%, 9300° K, full white pattern,
without audio/USB.
RETURN TO TOP OF THE PAGE
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts.
Signal pin assignments are listed in the following table:
VESA Mode Video H-sync V-sync Power
Used LED color
ON Active Yes Yes < 50 W Blue
OFF Blanked No No < 1 W Amber
This monitor is ENERGY STAR®compliant. As an ENERGY STAR®Partner, PHILIPS
has determined that this product meets the ENERGY STAR®guidelines for energy
efficiency.
• Dimension (WxHxD) * 425 x 377 x235 mm (in lowest position)
• Weight 8.6 Kg
• Tilt / Swivel -5° ~ 25° / + - 65°
• Height adjustment rang 130 mm
• Portrait display 90° rotation counter clockwise
• Power supply 100 — 240 VAC, 50/60 Hz
• Power consumption 50 W*
• Temperature 5° C to 35° C (operating)
-20° C to 60° C (storage)
• Relative humidity 20% to 80%
• System MTBF 50K hrs
• Cabinet color 190P5EG: Light Gray
190P5EB: Black
190P5ES: Silver
Pin
No. Signal Assignment Pin No. Signal Assignment Pin No. Signal Assignment
Product Information
Page 5 of 9

2. The 15-pin D-sub connector (male) of the signal cable:
RETURN TO TOP OF THE PAGE
1T.M.D.S. Data2- 9T.M.D.S. Data1-
17 T.M.D.S. Data0-
2T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+
3T.M.D.S. Data2/4
Shield 11 T.M.D.S. Data1/3 Shield 19 T.M.D.S. Data0/5 Shield
4No connect 12 No connect 20 No connect
5No connect 13 No connect 21 No connect
6DDC Clock 14 +5V Power 22 T.M.D.S. Clock
Shield
7DDC Data 15 Hot Plug Detect 23 T.M.D.S. Clock+
8No connect 16 Ground (for +5V) 24 T.M.D.S. Clock-
Pin
No. Assignment Pin No. Assignment
1Red video input 9+5V
2Green video input/SOG 10 Logic ground
3Blue video input 11 Ground
4Sense (GND) 12 Serial data line (SDA)
5Hot Plug Detect 13 H. Sync / H+V
6Red video ground 14 V. Sync (VCLK for DDC)
7Green video ground 15 Data clock line (SCL)
8Blue video ground
Product Information
Page 6 of 9

Product Views
Follow the links to see various views of the monitor and its components.
Front View Product Description
RETURN TO TOP OF THE PAGE
Physical Function
1) Tilt
2) Swivel
Product Information
Page 7 of 9

3) Height adjustment
4) Portrait display
Turn monitor from landscape view to portrait view.
Rotate the monitor body 90 degrees counter clockwise.
Product Information
Page 8 of 9

RETURN TO TOP OF THE PAGE
Product Information
Page 9 of 9

Installing Your LCD Monitor
Front View Product Description
RETURN TO TOP OF THE PAGE
Rear View
UP and DOWN buttons are used when adjusting the OSD of your
monitor.
LEFT and RIGHT buttons, like the UP and DOWN buttons, are also
used in adjusting the OSD of your monitor.
BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are
pressed, the adjustment controls for the BRIGHTNESS will show
up.
VOLUME VOLUME hotkey. When the LEFT and RIGHT arrow buttons are
pressed, the adjustment controls for VOLUME will show up.
OK button which when pressed will take you to the OSD controls.
POWER button switches your monitor on.
Automatically adjust the horizontal position, vertical position, phase
and clock setting.
LightFrameTM hotkey for mode-switching between full-screen mode
and multi-window mode.
Installing Your LCD Monitor
Page 1 of 2