Philips BDL3215E User manual

Public Signage Solutions
2010© Koninklijke Philips Electronics N.V. All rights reserved.
Philips and the Philips Shield Emblem are registered trade marks
of Koninklijke Philips Electronics N.V and are used under license
from Koninklijke Philips Electronics N.V.
User Manual
BDL3215E
BDL4225E
EN

TABLE OF CONTENTS
SAFETY INSTRUCTIONS..................................................................................................................................................................................................................... 1
Contents..................................................................................................................................................................................................................................................... 7
Elements Name and Functions............................................................................................................................................................................................................. 8
Control Panel ................................................................................................................................................................................................................................... 8
Terminal Panel.................................................................................................................................................................................................................................. 9
Remote Control............................................................................................................................................................................................................................. 10
Operating Range for the Remote Control ............................................................................................................................................................................. 11
Handling the remote control ..................................................................................................................................................................................................... 11
How to mount or attach table stand to the LCD Monitor........................................................................................................................................................ 12
Setup Procedure..................................................................................................................................................................................................................................... 14
Install the LCD Monitor in Portrait Mode...................................................................................................................................................................................... 16
Connectivity............................................................................................................................................................................................................................................ 17
Connectivity Diagram .................................................................................................................................................................................................................. 17
Connecting to a Personal Computer....................................................................................................................................................................................... 18
Connecting to a Digital Interface Equipment ........................................................................................................................................................................ 19
Connecting to a DVD Player...................................................................................................................................................................................................... 20
Connecting to a Stereo Amplifier............................................................................................................................................................................................. 21
Basic Operation...................................................................................................................................................................................................................................... 22
Power ON and OFF Modes........................................................................................................................................................................................................ 22
Power Indicator.............................................................................................................................................................................................................................. 23
Using Power Management........................................................................................................................................................................................................... 23
Display Signal of Video Source Setting to [VIDEO]............................................................................................................................................................. 23
Picture Size...................................................................................................................................................................................................................................... 23
Smart Picture Mode...................................................................................................................................................................................................................... 24
Audio Source Switching ............................................................................................................................................................................................................... 24
Control Lock Mode ...................................................................................................................................................................................................................... 24
OSD Information .......................................................................................................................................................................................................................... 24
OSD (On-Screen-Display) Controls ................................................................................................................................................................................................ 25
PICTURE.......................................................................................................................................................................................................................................... 26
SCREEN ........................................................................................................................................................................................................................................... 28
AUDIO............................................................................................................................................................................................................................................. 30
PIP (PICTURE IN PICTURE)...................................................................................................................................................................................................... 31
CONFIGURATION 1 .................................................................................................................................................................................................................. 32
CONFIGURATION 2 .................................................................................................................................................................................................................. 34
ADVANCED OPTION................................................................................................................................................................................................................ 36
NOTE................................................................................................................................................................................................................................................ 39
Pixel defect policy ........................................................................................................................................................................................................................ 41
Features that do not require user interface ................................................................................................................................................................................... 42
Troubleshooting ..................................................................................................................................................................................................................................... 43
Specifications........................................................................................................................................................................................................................................... 45
Pin Assignment........................................................................................................................................................................................................................................ 49

User Manual BDL3215E / BDL4225E
1
SAFETY INSTRUCTIONS
WARNINGS AND PRECAUTIONS
KNOW THESE SAFETY SYMBOLS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this
product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this
product.
Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National
(OHFWULFDO&RGH6HFWLRQRI&DQDGLDQ(OHFWULFDO&RGH3DUW,WKDWSURYLGHVJXLGHOLQHVIRUSURSHUJURXQGLQJDQGLQSDUWLFXODUVSHFLÀHV
that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
CAUTION: )&&&6$UHJXODWLRQVVWDWHWKDWDQ\XQDXWKRUL]HGFKDQJHVRUPRGLÀFDWLRQVWRWKLVHTXLSPHQWPD\YRLGWKHXVHU·VDXWKRULW\
to operate it.
CAUTION: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.
Attention: 3RXUpYLWHUOHVFKRFVpOHFWULTXHVLQWURGXLUHODODPHODSOXVODUJHGHODÀFKHGDQVODERPHFRUUHVSRQGDQWHGHODSULVHHW
SRXVVHUMXVTX·DXIRQG
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U.S. copyright
laws. Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part may be in violation of these
rights.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Read and follow these instructions when connecting and using your computer monitor:
Unplug the monitor if you are not going to use it for an extensive period of time.v
Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry clothv
when the power is off. However, never use alcohol, solvents or ammonia-based liquids.
Consult a service technician if the monitor does not operate normally when you have followed the instructions in thisv
manual.
The casing cover should be opened only by qualified service personnel.v
Keep the monitor out of direct sunlight and away from stoves or any other heat source.v
Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics.v
Do not block the ventilation holes on the cabinet.v
Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.v
If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds before attach the powerv
cable or DC power cord for normal operation.
To avoid the risk of shock or permanent damage to the set do not expose the monitor to rain or excessive moisture.v
When positioning the monitor, make sure the power plug and outlet are easily accessible.v
IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast remainsv
on the screen for an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen.
This is a well-known phenomenon that is caused by the shortcomings inherent in the LCD technology. In most cases
the afterimage will disappear gradually over a period of time after the power has been switched off. Be aware that the
after-image symptom cannot be repaired and is not covered under warranty.

User Manual BDL3215E / BDL4225E
2
REGULATORY INFORMATION
CE DECLARATION OF CONFORMITY
MMD declare under our responsibility that the product is in conformity with the following standards.
(16DIHW\UHTXLUHPHQWRI,QIRUPDWLRQ7HFKQRORJ\(TXLSPHQW
(15DGLR'LVWXUEDQFHUHTXLUHPHQWRI,QIRUPDWLRQ7HFKQRORJ\(TXLSPHQW
(1$$,PPXQLW\UHTXLUHPHQWRI,QIRUPDWLRQ7HFKQRORJ\(TXLSPHQW
EN61000-3-2:2006 (Limits for Harmonic Current Emission)
EN61000-3-3:1995+A1:2001+A2:2005 (Limitation of Voltage Fluctuation and Flicker)
following provisions of directives applicable.
2006/95/EC (Low Voltage Directive)
2004/108/EC (EMC Directive)
93/68/EEC (Amendment of EMC and Low Voltage Directive) and is produced by a manufacturing organization on ISO9000 level.
FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE (U.S. Only)
7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD&ODVV%GLJLWDOGHYLFHSXUVXDQWWR
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
UHVLGHQWLDOLQVWDOODWLRQ7KLVHTXLSPHQWJHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRWLQVWDOOHGDQG
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
JXDUDQWHHWKDWLQWHUIHUHQFHZLOOQRWRFFXULQDSDUWLFXODULQVWDOODWLRQ,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHWR
UDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKHXVHULVHQFRXUDJHGWRWU\
to correct the interference by one or more of the following measures:
5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD
,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKHUHFHLYHULVFRQQHFWHG
&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
&KDQJHVRUPRGLÀFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKH
XVHU·VDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT
REGULATIONS.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

User Manual BDL3215E / BDL4225E
3
POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works
together (computer, monitor, printer, and so on) should have the same power supply source.
The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in
the form of a fuse with a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply socket,
which should be located near the equipment and easily accessible.
A protection mark “B” confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107
and PN-89/E-06251.
ELECTRIC, MAGNETIC AND ELECTRONMAGNETIC FIELDS (“EMF”)
MMD manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit1.
and receive electromagnetic signals.
One of MMD’s leading Business Principles is to take all necessary health and safety measures for our products, to comply with all2.
applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.
MMD is committed to develop, produce and market products that cause no adverse health effects.3.
MMD confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence4.
available today.
MMD plays an active role in the development of international EMF and safety standards, enabling MMD to anticipate further developments5.
in standardisation for early integration in its products.

User Manual BDL3215E / BDL4225E
4
WARNING - THIS APPLIANCE MUST BE EARTHED.
Important:
This apparatus is supplied with an approved moulded 13A plug. To change a
fuse in this type of plug proceed as follows:
Remove fuse cover and fuse.1.
Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type.2.
Refit the fuse cover.3.
If the fitted plug is not suitable for your socket outlets, it should be cut off
and an appropriate 3-pin plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug
without a fuse is used, the fuse at the distribution board should not be
greater than 5A.
NOTE: The severed plug must be destroyed to avoid a possible shock hazard should it
be inserted into a 13A socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accordance with the following
code:
BLUE - “NEUTRAL” (“N”)
BROWN - “LIVE” (“L”)
GREEN & YELLOW - “EARTH” (“E”)
The GREEN AND YELLOW wire must be connected to the terminal in the plug which1.
is marked with the letter “E” or by the Earth symbol or coloured GREEN or GREEN
AND YELLOW.
The BLUE wire must be connected to the terminal which is marked with the letter “N”2.
or coloured BLACK.
The BROWN wire must be connected to the terminal which marked with the letter3.
“L” or coloured RED.
Before replacing the plug cover, make certain that the cord grip is clamped over the
sheath of the lead - not simply over the three wires.
(A)
(B)
INFORMATION FOR UK ONLY

User Manual BDL3215E / BDL4225E
5
Ё೑⬉ᄤֵᙃѻક∵ᶧ᥻ࠊ󰵼䆚㽕∖Ё೑5R+6⊩㾘󰵼⼎㽕∖ѻકЁ᳝↦᳝ᆇ⠽䋼៪ܗ
㋴ⱘৡ⿄ঞ৿䞣
䚼ӊৡ⿄
᳝↦᳝ᆇ⠽䋼៪ܗ㋴
䪙
( Pb )
∲
( Hg )
䬝
( Cd )
݁Ӌ䫀
(Cr 6+ )
໮⒈㘨㣃
( PBB )
໮⒈Ѡ㣃䝮
( PBDE )
໪໇ {{ { { { {
⎆᱊䴶ᵓ °° { ƻƻ {
⬉䏃ᵓ㒘ӊ °{ { { { {
䰘ӊ
䘹᥻఼ˈ⬉⑤㒓ˈ䖲᥹㒓 °{ { { { {
䘹᥻఼⬉∴ °{ { { { {
{㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼SJ/T11363-2006󰵼ޚ㾘ᅮⱘ䰤
䞣㽕∖ҹϟ
°㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎSJ/T11363-2006󰵼ޚ㾘ᅮ
ⱘ䰤䞣㽕∖

10 ῿ኛᄢཊᡰᐑ
࿒ᵧ↳ጦᡰᐑ)๒ྐྵ*಩᭓๭ኔᒨ᜘ዊ຃၌࿌ቇ࿌፛࿌ᒃሸḜᆾທᕞྜྷ༻ᙚᄢཊቇᛐ཯๖ຂᨤᣝཉ༜ምᆾᎷ⋸
಩᭓๭ኔᒨ᜘ዊཊເᄢཊ󰪗᭓๭ኔᒨ᜘ዊຂᨤᮯ῿ᮒឭ࿁⇺ᐏ࿜ጿᆾᮯᄷ้ᄀಪᖺ᜘ឭ࿁⇺ᐏᨔᒃቇᡰᐑಫ

User Manual BDL3215E / BDL4225E
6
NORTH EUROPE (NORDIC COUNTRIES) INFORMATION
Placering/Ventilation
VARNING:
FÖRSÄKR A DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA , NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.
END-OF-LIFE DISPOSAL
Your new TV/Monitor contains materials that can be recycled and reused. Specialized companies can recycle your
product to increase the amount of reusable materials and to minimize the amount to be disposed of.
Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.
For additional information on recycling contact www.eia.org (Consumer Education Initiative)
WASTE ELECTRICAL AND ELECTRONIE EQUIPMENT-WEEE
Attention users in European Union private households
This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EG governing used
electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible
IRUGLVSRVDORIWKLVHTXLSPHQWWKURXJKDGHVLJQDWHGZDVWHHOHFWULFDODQGHOHFWURQLFHTXLSPHQWFROOHFWLRQ7RGHWHUPLQHWKH
ORFDWLRQVIRUGURSSLQJRIIVXFKZDVWHHOHFWULFDODQGHOHFWURQLFFRQWDFW\RXUORFDOJRYHUQPHQWRIÀFHWKHZDVWHGLVSRVDO
organization that serves your household or the store at which you purchased the product.
Attention users in United States:
Like all LCD products, this set contains a lamp with Mercury. Please dispose of according to all Local, State and Federal Laws. For the
disposal or recycling information, contact: www.mygreenelectronics.com or www.eiae.org.

User Manual BDL3215E / BDL4225E
7
* The following components are prepared as options.
Table standv
Main switch coverv
Screw for Main Switch cover x 2v
BNC TO RCA adapter x 5v
Logo guiderv
POWER
SMART
VIDEO
SOURCE
PIP
INPUTON/OFF CHANGE
BRIGHTNESSCONTRAST
DISPLAY
AUTO
ADJUST
MUTE
VOL UP
VOL DOWN
EXIT
MENU
SET
AUDIO
SOURCE
Contents
BDL3215E/BDL4225E monitor pack* should include:
LCD monitorv
Power cord (1.8 m)v
VGA Signal Cable (1.8 m)v
User Manualv
Remote Control and AAA Batteriesv
Quick installation guide.v
* Please make sure that for all other regions, apply a power
cord that conforms to the AC voltage of the power socket and
has been approved by and complies with the safety regulations
of the particular country
<RXPLJKWOLNHWRVDYHWKHSDFNDJHER[DQGSDFNLQJPDWHULDO
for shipping the monitor.
Main switch cover
* The supplied power cord varies depending on destination.
For EU For China
For North America
Power cord
User’s Manual Remote Control
and AAA Batteries
Screw for Main switch cover
(3 x 6) x 2
BNC-RCA adapter x 5
Video Signal Cable
(D-SUB to D-SUB Cable)
Logo guider
For UK

User Manual BDL3215E / BDL4225E
8
Elements Name and Functions
Control Panel
abc
d
ef
g
h
aPOWER button (B): To switch the power on/off.
bCH (+) button: To move the highlight bar up to adjust the selected item while OSD menu is on.
cCH (-) button: To move the highlight bar down to adjust the selected item while OSD menu is on.
dMENU button: To return to previous menu while OSD menu is on or to activate the OSD menu when the OSD menu is
off.
eVOL (+) button: To increase the adjustment while OSD menu is on, or to increase the audio output level while the OSD
menu is off.
fVOL (-) button: To decrease the adjustment while OSD menu is on, or to decrease the audio output level while the OSD
menu is off.
gRemote control sensor and Power indicator: To receive the IR signal from the remote control. The indicator would
show blue when the LCD monitor is active, and would turn blank when the LCD is POWER OFF. While in the case of the
system is in power save mode, it would show amber. When SCHEDULE is enabled, it would show blinking blue.
hMain Power Switch: To turn the main power on/off.
NOTE:
Keyboard Control Lock Mode: This function completely disables the access to all Keyboard Control functions. To enable the keyboard
control lock, press both “CH+” and “CH-” buttons and hold down continuously for more than 3 seconds. To recover back to the user
mode, press both “CH+” and “CH-” buttons and hold continuously for three 3 seconds.

User Manual BDL3215E / BDL4225E
9
Terminal Panel
(OUT)
1 3 4 5
11
72 6 9 108
(IN) (OUT)
(IN)
aAC IN connector
Connect the supplied power cord to the wall outlet.
bAUDIO OUT
To output the audio signal from AUDIO IN 1, 2, or 3 jack to
an external device (Stereo receiver, amplifier, etc.).
cAUDIO IN 1, 2, 3
To input audio signal from an external equipment such as
computers, VCRs, or DVD players.
dVIDEO INPUT/OUTPUT Connector
VIDEO IN connector (BNC):v To input composite
video signal.
VIDEO OUT connector (BNC):v To output
composite video signal from VIDEO IN connector.
S-VIDEO IN connector (Mini DIN 4 pin):v To input
S-VIDEO (Y/C separate signal).
eEXTERNAL CONTROL (D-Sub 9 pin)
Connect RS-232C input from external equipment such as
computers for the use of loop through function.
fVGA OUT (mini D-Sub 15 pin)
To output the signal from VGA IN and RGB component.
gHDMI IN
Connecting equipment such as DVD players, HDTV devices,
or Set-Top-Box.
hVGA IN (mini D-sub 15 pin)
To input analog RGB signals from a computer or from other
RGB equipment.
iDVI-D INPUT
To input digital RGB signals from a computer or other HDTV
device with digital RGB output.
* This connector does not support analog input.
jVGA (BNC) [R, G, B, H, V] or COMPONENT [Y, Cb/
Pb, Cr/Pr]
To input analog RGB or Y, Cb/Pb,Cr/Pr signals from DVD
players, HDTV decoders, set-top-box or game consoles etc.
kKensington Lock
For security and theft prevention.

User Manual BDL3215E / BDL4225E
10
Remote Control
POWER
SMART
VIDEO
SOURCE
PIP
INPUTON/OFF CHANGE
BRIGHTNESSCONTRAST
DISPLAY
AUTO
ADJUST
MUTE
VOL UP
VOL DOWN
EXIT
MENU
SET
AUDIO
SOURCE
110
11
12
13
14
15
16
17
18
19
20
2
3
4
5
6
7
8
9
aPOWER button
To turn the power on/off.v
If LED Power Indicator on the monitor is not lightening,v
then the remote control will not work.
bSMART button
To select smart picture mode from [HIGHBRIGHT],v
[STANDARD], [sRGB], [CINEMA].
HIGHBRIGHT:v for moving image such as Video
STANDARD:v for images (Factory setting)
sRGB:v for text based images
CINEMA:v for movies.
cPIP (Picture In Picture) button
ON/OFF button:v To turn PIP mode ON/OFF.
INPUT button:v To select the input signal for the sub-
picture.
CHANGE button:v To exchange between the main
picture and sub-picture.
NOTE: The “PIP” and “POP” modes do not work if the
screen size is “CUSTOM” or “REAL”.
dCONTRAST button
To start CONTRACT OSD selection, and then press “+”
or “-” button to adjust the value.
eDISPLAY button
To turn on/off the setting information displayed on the right-
up corner of the screen.
f“-” button
To decrease the adjustment with OSD menu.v
To move the sub-picture left when in “PIP” mode.v
gSET button
To activate the setting with OSD menu.
hAUTO ADJUST button
To execute the AUTO ADJUST function.
iMUTE button
Mutes or restores audio output.
jVIDEO SOURCE button
To set video source by toggle selection from [HDMI],
[DVI-D], [VGA], [COMPONENT], [S-VIDEO)], [VIDEO]
and [VGA(BNC)].
kAUDIO SOURCE button
To set audio source by toggle selection from [AUDIO 1] to
[AUDIO2], [AUDIO3] and [HDMI].
NOTE: [HDMI] is only selectable when video source is set
to [HDMI].
lSIZE button
To set picture size by toggle selection from [FULL],
[NORMAL], [CUSTOM] , [DYNAMIC] and [REAL].
NOTE: [DYNAMIC] is for video mode only.
mBRIGHTNESS button
To start the BRIGHTNESS OSD selection, and then press
“+” or “-” button to adjust the value.
nobutton
To move the highlight bar up to adjust the selected itemv
when OSD menu is on.
To move the sub-picture up when in “PIP” mode.v
oMENU button
To turn the OSD menu on/off.
p“+” button
To increase the adjustment with OSD menu.v
To move the sub-picture right when in “PIP” mode.v
qEXIT button
To return to a previous channel or menu screen.
rœbutton
To move the highlight bar down to adjust the selectedv
item when OSD menu is on.
To move the sub-picture down when in “PIP” mode.v
sVOL UP button
To increase the audio output level.
tVOL DOWN button
To decrease the audio output level.

User Manual BDL3215E / BDL4225E
11
Operating Range for the Remote
Control
Use the remote control by pointing it towards the remote
control sensor on the LCD monitor.
Use the remote control unit within a distance of about 7 m/23 ft
from the front of the remote control sensor on the LCD monitor
and within horizontal and vertical angle 30° with a distance of
about 3 m/10 ft.
POWER
SMART
VIDEO
SOURCE
PIP
INPUTON/OFF CHANGE
BRIGHTNESSCONTRAST
DISPLAY
AUTO
ADJUST
MUTE
VOL UP
VOL DOWN
EXIT
MENU
SET
AUDIO
SOURCE
30 30
NOTE:
The remote control system may not function when direct sunlight
or strong illumination strikes the remote control sensor of the
LCD monitor, or when there is an obstacle in the radiation path.
Handling the remote control
Do not subject to strong shock.
'RQRWDOORZZDWHURURWKHUOLTXLGWRVSODVKWKHUHPRWH
control. If the remote control gets wet, wipe it dry
immediately.
$YRLGH[SRVXUHWRKHDWDQGVWHDP
Other than to install the batteries, do not open the remote
control.

User Manual BDL3215E / BDL4225E
12
How to mount or attach table stand to the LCD
Monitor
Installs the LCD monitor in one of the following two ways:
Way I: Attach and remove the table stand
How to install table stand
Please turn the monitor off.1.
After inserting table stand in guide block, fasten the thumbscrews on both sides of the monitor.2.
NOTE:
Install the table stand with their longer portions directing to the front.
In the upright position
How to remove the table stand
Spread the protective sheet on the flat surface.1.
Make the monitor lying on the protective sheet.2.
Remove the screws using a screwdriver and place them in a safe place for reuse.3.
Thumbscrews
Table stand
Longer portions directs to the front

User Manual BDL3215E / BDL4225E
13
Way II: Mount the monitor on the wall
Before mounting the monitor to the wall, make sure that the system has been power-off and you have obtain a standard wall-mounting kit
(commercially available). Using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America is recommended.
100
100
100
100 100 100 Protective Sheet
Tabletop standTable
Lay a protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to1.
scratch the screen face.
This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Make sure all these stuffs are ready for2.
wall-mount installation.
Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to3.
the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.
For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten4.
WKHPVHFXUHO\5HFRPPHQGHGWRUTXH1vFP
Caution:
For preventing the monitor from falling.
Install the monitor with metal brackets for wall or ceiling installation (commercially available) on your own responsibility. For detailed
procedures of installation, refer to the instructions of the metal brackets.
7ROHVVHQWKHSUREDELOLW\RILQMXU\DQGGDPDJHUHVXOWLQJIURPIDOORIWKHPRQLWRULQFDVHRIHDUWKTXDNHRURWKHUGLVDVWHUEHVXUHWRFRQVXOW
the bracket manufacturer for installation location.
Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.
100 mm 100 mm
100 mm
100 mm

User Manual BDL3215E / BDL4225E
14
Setup Procedure
Install the system on the right location1.
CAUTION:
THE LCD MONITOR MUST BE MOVED OR INSTALLED BY
TWO OR MORE PERSONS. (For 42” only)
Failure to follow this caution may result in injury if the LCD
monitor falls.
DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY
YOURSELF.
7KH/&'GLVSOD\PXVWEHLQVWDOOHGE\DTXDOLÀHGWHFKQLFLDQ
Contact your dealer for more information.
DO NOT MOUNT OR OPERATE THE DISPLAY UPSIDE
DOWN, FACE UP, OR FACE DOWN.
DO NOT INSTALL THE LCD MONITOR WHERE IT WILL BE
EXPOSED TO DIRECT SUNLIGHT.
Failure to follow this caution will result in display defects.
IMPORTANT:
Lay the protective sheet, which was wrapped around the LCD
monitor when it was packaged, beneath the LCD monitor so as
not to scratch the panel.
Install the remote control batteries2.
The remote control is powered by 1.5V AAA batteries. To
install or replace batteries:
Press and slide to open the cover.1.
Align the batteries according to the (+) and (–) indications2.
inside the case.
Replace the cover.3.
CAUTION:
Incorrect use of batteries can result in leaks or bursting. Be
careful especially about the following points.
Place “AAA” batteries matching the + and - signs on each
battery to the + and - signs of the battery compartment.
'RQRWPL[EDWWHU\W\SHV
Do not combine new batteries with used ones. It causes
shorter battery life or leakage of batteries.
5HPRYHGHDGEDWWHULHVLPPHGLDWHO\WRSUHYHQWEDWWHU\OLTXLG
from leaking into the battery compartment. Don’t touch
H[SRVHGEDWWHU\DFLGLWFDXVHGDPDJHWR\RXUVNLQ
NOTE:
If you do not intend to use the Remote Control for a long period,
remove the batteries.
Connect to external equipment3.
7RSURWHFWWKHFRQQHFWHGHTXLSPHQWWXUQRIIWKHPDLQSRZHU
before making connections.
Please refer to section “Connectivity” P.17~P.21 for operations.
Connect power cord4.
The power outlet socket should be installed as near to the
HTXLSPHQWDVSRVVLEOHDQGVKRXOGEHHDVLO\DFFHVVLEOH
Fully insert the prongs into the power outlet socket. Loose
connection may cause noise.
NOTE:
Please refer to “SAFETY INSTRUCTIONS” section of this
manual for proper selection of AC power cord.
Turn on the power of the5.
attached external equipment
When connected with a computer, turn the computer power
RQÀUVW
Operate the attached external equipment6.
'LVSOD\WKHVLJQDOIURPWKHH[WHUQDOHTXLSPHQW
Adjust the sound7.
0DNHDGMXVWPHQWVWRGHFUHDVHRULQFUHDVHYROXPHLIUHTXLUHG
Adjust the screen8.
0DNHDGMXVWPHQWVWRWKHGLVSOD\SRVLWLRQRUVHWWLQJVLIUHTXLUHG
Adjust the image9.
0DNHDGMXVWPHQWVRIEULJKWQHVVRUFRQWUDVWLIUHTXLUHG
Recommended Adjustment10.
To reduce the risk of “image persistence”, please adjust the
following items based on the application being used:
“POWER SAVE”, “PANEL SAVING”, “DATE AND TIME”,
“SCHEDULE”.

User Manual BDL3215E / BDL4225E
15
To prevent the main power11. switch from being changed
To prevent the possibility of main power switch being carelessly
pushed, please attach the main switch cover (accessory) onto
it.
NOTE:
Remove main power switch cover to turn off the display.
Screw
Main switch cover

User Manual BDL3215E / BDL4225E
16
Install the LCD Monitor in Portrait Mode
BDL3215E/BDL4225E can be installed in portrait position, under the following conditions:
Caution:
Portrait mode is effective only when wall-mounted or ceiling-mounted. The table stand can not be used for the monitor in portrait position.
Placing the monitor in portrait position, will shorten the average life of the LCD backlight.
Operational Environment (Temperature) shall be limited, as shown below:
Operational
Environment
Temperature 5 - 35 °C / 41 - 95 °F
Humidity 20 - 80 % (Without condensation)
Please orientate the monitor in the direction shown as the right figure:
Do not place monitor in landscape in any other manner.
How to set-up
Remove the table stand if they are attached.1.
The “2. ” logo should be on the LEFT side when facing the monitor.
90 90
How to Remove the Logo for landscape mode?
Prepare a piece of paper with a cutting area of logo as a protector to prevent the front bezel from scratching.1.
Using a knife, carefully remove the logo sticker with the paper placing beneath.2.
Tear off the logo sticker.3.
123
How to Use the Logo Guider for Portrait Mode?
(a) Before applying, make sure the guider is well shaped. The “PHILIPS” sticker attached on the end of it could be folded back as figure (a).
(b) Turn back the logo end of the guider and remove the sticky tape of the logo.
(c) Slide the logo guider along the short side of the front bezel as figure c & then return the logo end of the guider back to the right side.
(d) With your left hand fixing the guider, scrunch the logo by your right hand to make it stuck firmly on the front bezel.
(e) Remove the guider and leave the logo over the front bezel.
Clockwise Counterclockwise

User Manual BDL3215E / BDL4225E
17
Connectivity
Before making connections:
)LUVWWXUQRIIWKHSRZHURIDOOWKHDWWDFKHGHTXLSPHQWVEHIRUHPDNLQJFRQQHFWLRQV
5HIHUWRWKHXVHUPDQXDOLQFOXGHGLQHDFKVHSDUDWHSLHFHRIHTXLSPHQW
Connectivity Diagram
BDL3215E / BDL4225E
BDL3215E / BDL4225E
(Second monitor)
DVD player
HD or laser disk player
VCR
Equipment with
Digital interface
Personal computer