Philips L Line 31BDL72 L Series User manual

21
3
* Dierences according to regions.
Display design and accessories may dier from those illustrated above.
X2
X2
X2
Unpacking
Connecting the cabinets
Rear/top/side/bottom views
Notes:
1. After unpacking, ensure that the modules are in good
condition. If anything is damaged or broken, please
contact your local service center immediately.
2. Use a pair of scissors to cut vacuum packaging, then
take the modules out of the package. Be extremely
careful not to damage the module when using the
scissors.
3. It is required to wear anti-static gloves before han-
dling the cabinet.
4. Do not place the display vertically on the oor, as it
may fall down and get damaged. (The damage will
not be covered by warranty)
Removing the
opening
Before breaking the opening,
determine the number of
displays to install and the
installation layout to form a
large video wall array.
1
1
2
3
4
2
3
4
POWER IN connector
POWER OUT connector
1
2
Mounting holes for screw bolt
CHECK button
DATA connector
DATA connector
X2
d
Not included:
2
*
Not included
c
*
1
b
a
*
Optional accessory
CTN: BM907006
*
*
T style inner hexagon
wrench, size 7
Optional accessory
CTN: BM907000
Quick start guide
Power cable
(daisy chain)
LAN cable
(RJ45, CAT-5)
Optional accessory
CTN: BM907005

4
Q41G31MD81305A
Please check out the website below for more product information.
Quick
Start
X1
X1
Professional
Display Solutions
L Line
31BDL72xxL
31BDL74xxL
2021 © TOP Victory Investments Ltd. All rights reserved.
This product has been manufactured by and is sold under
the responsibility of Top Victory Investments Ltd., and Top
Victory Investments Ltd. is the warrantor in relation to this
product. Philips and the Philips Shield Emblem are regis-
tered trademarks of Koninklijke Philips N.V. and are used
under license.
Specications are subject to change without notice.
Version: V1.00 2021-09-23
https://www.philips.co.uk/p-m-pr/signage-solutions/latest#filters=L_LINE_SERIES_SU
Installing the LED modules
Connecting the data and power cables
5
optional accessories
Power plug types vary by country/region.
*
**
Envision Peripherals Inc.
490 N McCarthy Blvd, Suite #120
Milpitas, CA 95035
USA
MMD Monitors & Displays Nederland B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
Plug the power plug into the electric outlet only when the cables are properly wired.
Note: More cable wiring scheme and mounting scheme can be found in the User’s Manual.
1 2 3
Module No.: xxxxxxxxxxxxxxxAxxxxxxx
Module No.: xxxxxxxxxxxxxxxBxxxxxxx
Module No.: xxxxxxxxxxxxxxxCxxxxxxx
5-1
5-2
5-3
UK Authorized Representative
UKCA Experts Ltd.
Dept 302, 43 Owston Road Carcroft
Doncaster, DN6 8DA United Kingdom
LAN cable
Power cable
(daisy chain)
LED display controller
*
*
**
*