Philips Q Line 65BDL3650Q User manual

User Manual (English)
www.philips.com/ppds
Professional
Display Solutions
Q Line
65BDL3650Q
75BDL3650Q
86BDL3650Q

65BDL3650Q/75BDL3650Q/86BDL3650Q
ii
Table Of Contents
1. Safety Instructions ......................................................... 1
2. Unpacking and Installation.......................................10
2.1. Unpacking ..........................................................10
2.2. Package Contents.............................................12
2.3. Installation Notes.............................................12
2.4. Mounting on a Wall ........................................13
2.5. Mounting in Portrait Orientation ...............14
3. Parts and Functions .....................................................15
3.1. Control Panel.....................................................15
3.2. Input/Output Terminals.................................16
3.3. Remote Control.................................................17
3.4. Inserting the batteries in the remote
control .................................................................21
3.5. Handling the remote control........................21
3.6. Operating range of the remote control ....21
3.7. USB Cover ...........................................................22
3.8. AC Switch Cover................................................23
4. Connecting External Equipment .............................24
4.1. Connecting External Equipment
(Multimedia Player).........................................24
4.2. Connecting a PC................................................24
4.3. Connecting Multiple Displays in a Daisy-
chain Conguration ........................................25
4.4. IR connection.....................................................25
4.5. IR Pass-through Connection..........................25
4.6. Wire-connecting to Network........................26
5. Operation.......................................................................27
5.1. Watch the Connected Video Source...........27
5.2. Change Picture Format...................................27
5.3. Overview.............................................................27
5.4. Media Player......................................................29
5.5. Browser................................................................33
5.6. PDF Player...........................................................37
5.7. CMND & Play......................................................40
5.8. Custom App .......................................................40
6. Setting UI........................................................................42
6.1. Settings................................................................42
6.2. Network & internet..........................................42
6.3. Connected devices ...........................................43
6.4. Signage Display.................................................44
6.5. Apps .....................................................................50
6.6. Display .................................................................50
6.7. Security................................................................50
6.8. System..................................................................50
6.9. About...................................................................51
7. OSD Menu ......................................................................52
7.1. Navigating the OSD Menu ............................52
7.2. OSD Menu Overview.......................................52
8. Supported Media Formats.........................................58
9. Input Mode....................................................................59
10. Pixel Defect Policy ........................................................60
10.1. Pixels and Sub-Pixels........................................60
10.2. Types of Pixel Defects + Dot Denition......60
10.3. Bright Dot Defects............................................60
10.4. Dark Dot Defects ..............................................61
10.5. Proximity of Pixel Defects ..............................61
10.6. Pixel Defect Tolerances...................................61
10.7. MURA...................................................................61
11. Cleaning and Troubleshooting ................................62
11.1. Cleaning..............................................................62
11.2. Troubleshooting ...............................................63
12. Technical Specications..............................................64
Warranty policy for Philips Professional Display
Solutions.........................................................................66
Index..........................................................................................68

65BDL3650Q/75BDL3650Q/86BDL3650Q
1
1. Safety Instructions
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those specied in this documentation may result
in exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your display:
This product is intended for use in professional installations in business settings only and is not suitable for domestic purposes.
Any use other than that for which this device is intended can void the warranty.
Operation:
• Keep the display out of direct sunlight and away from stoves or any other heat sources.
• Keep the display away from oil, otherwise the plastic cover may be damaged.
• It is recommended to set the display up in the well-ventilated place.
• Ultra-violet ray lter is necessary of outdoor operation.
• If the product will be used in extreme conditions such as high temperature, humidity, display patterns or operation time etc...
It is strongly recommended to contact Philips for Application engineering advice. Otherwise, its reliability and function may
not be guaranteed. Extreme conditions are commonly found at Airports, Transit Stations, Banks, Stock market, and Controlling
systems.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics.
• Do not block the ventilation holes on the cabinet.
• When positioning the display, make sure the power plug and outlet are easily accessible.
• When turning o the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal
operation.
• Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your
local service center.
• Do not subject the display to severe vibration or high impact conditions during operation.
• Do not knock or drop the display during operation or transportation.
• The eye bolt is for usage in short-time maintenance and installation. We suggest not to use the eye bolt for more than 1 hour.
Prolong usage is prohibited. Please keep a clear safety area under the display while using the eye bolt.
Maintenance:
• To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display,
grasp the frame to lift; do not lift the display by placing your hand or ngers on the LCD panel.
• Unplug the display if you are not going to use it for an extensive period of time.
• Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power
is o. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.
• To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or an excessively
moist environment.
• If your display becomes wet, wipe it with dry cloth as soon as possible.
• If a foreign substance or water gets in your display, turn the power o immediately and disconnect the power cord. Then
remove the foreign substance or water, and send the unit to the maintenance center.
• Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold.
• In order to maintain the best performance of your display and ensure a longer lifetime, we strongly recommend using the
display in a location that falls within the following temperature and humidity ranges.

65BDL3650Q/75BDL3650Q/86BDL3650Q
2
• Environmental absolute ratings
Item Min. Max. Unit
Storage temperature -20 65 °C
Operation temperature 0 40 °C
Glass Surface temperature
(Operation)
0 65 °C
Storage humidity 5 90 % RH
Operating humidity 20 80 % RH
• LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.
• Only the lifetime of the display stated in this specication is guaranteed if the display is used under the proper operation
conditions.
IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a periodic
screen refresh application if the unit will display unchanging static content. Uninterrupted display of still or static images over
an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. This is a well-known
phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear
gradually over a period of time after the power has been switched o.
WARNING: Severe “burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. This is also
not covered under the terms of your warranty.
Service:
• The casing cover should be opened only by qualied service personnel.
• If there is any need for repair or integration, please contact your local service center.
• Do not leave your display under direct sunlight.
If your display does not operate normally, having followed the instructions set out in this document, please contact
a technician or your local service center.
Stability Hazard.
The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the oor/
wall in accordance with the installation instructions.
Read and follow these instructions when connecting and using your display:

65BDL3650Q/75BDL3650Q/86BDL3650Q
3
• Unplug the display if you are not going to use it for an extensive period of time.
• Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth
when the power is o. However, never use alcohol, solvents or ammonia-based liquids.
• Consult a service technician if the display does not operate normally when you have followed the instructions in
this manual.
• The casing cover should be opened only by qualied service personnel.
• Keep the display out of direct sunlight and away from stoves or any other heat sources.
• Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
• When turning o the display by detaching the power cable or DC power cord, wait for 6 seconds before re-
attaching the power cable or DC power cord for normal operation..
• To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive
moisture.
• When positioning the display, make sure the power plug and outlet are easily accessible.
• IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast
remains on the screen for an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front
of the screen. This is a well-known phenomenon that is caused by the shortcomings inherent in LCD technology.
In most cases the afterimage will disappear gradually over a period of time after the power has been switched
o. Be aware that the after-image symptom cannot be repaired and is not covered under warranty.
• If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin
outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding
pin is an important safety feature.
EU Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), RoHS directive (2011/65/EU),
ErP directive (2009/125/EC).
This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these
harmonized standards published under Directives of Ocial Journal of the European Union.
ESD Warnings
When user close to the monitor may cause the equipment discharge and reboot to the display of main menu.
Warning:
This equipment is compliant with Class A of EN55032/CISPR 32. In a residential environment this equipment may cause radio
interference.
Federal Communications Commission (FCC) Notice (U.S. Only)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device.
To prevent damage which may result in re or shock hazard, do not expose this appliance to rain or excessive moisture.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

65BDL3650Q/75BDL3650Q/86BDL3650Q
4
TPV USA Corp
6525 Carnegie Blvd #200
Charlotte, NC 28211
USA
Polish Center for Testing and Certication Notice
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that
works together (computer, display, printer, and so on) should have the same power supply source.
The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a
fuse with a nominal value no larger than 16 amperes (A).
To completely switch o the equipment, the power supply cable must be removed from the power supply socket, which should be
located near the equipment and easily accessible.
A protection mark “B” conrms that the equipment is in compliance with the protection usage requirements of standards PN-93/
T-42107 and PN-89/E-06251.
Electric, Magnetic and Electromagnetic Fields (“EMF”)
1. We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in general have the
ability to emit and receive electromagnetic signals.
2. One of our leading Business Principles is to take all necessary health and safety measures for our products, to comply with all
applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.
3. We are committed to develop, produce and market products that cause no adverse health eects.
4. We conrm that if its products are handled properly for their intended use, they are safe to use according to scientic evidence
available today.
5. We play an active role in the development of international EMF and safety standards, enabling us to anticipate further
developments in standardization for early integration in its products.

65BDL3650Q/75BDL3650Q/86BDL3650Q
5
Information for U.K. only
(A)
(B)
WARNING - THIS APPLIANCE MUST BE EARTHED.
Important:
This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this
type of plug proceed as follows:+
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS 1362 5A, A.S.T.A. or BSI approved type.
3. Ret the fuse cover.
If the tted plug is not suitable for your socket outlets, it should be cut o and an
appropriate 3-pin plug tted in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug without a
fuse is used, the fuse at the distribution board should not be greater than 5A.
NOTE: The severed plug must be destroyed to avoid a possible shock hazard should it
be inserted into a 13A socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accordance with the following code:
BLUE - “NEUTRAL” (“N”)
BROWN - “LIVE” (“L”)
GREEN & YELLOW - “EARTH” (“E”)
1. The GREEN & YELLOW wire must be connected to the terminal in the plug which is
marked with the letter “E” or by the Earth symbol or coloured GREEN or GREEN &
YELLOW.
2. The BLUE wire must be connected to the terminal which is marked with the letter “N”
or coloured BLACK.
3. The BROWN wire must be connected to the terminal which marked with the letter “L”
or coloured RED.
Before replacing the plug cover, make certain that the cord grip is clamped over the
sheath of the lead - not simply over the three wires.
North Europe (Nordic Countries) Information
Placering/Ventilation
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.

65BDL3650Q/75BDL3650Q/86BDL3650Q
6
China RoHS
根据中国大陆《电器电子产品有害物质限制使用管理办法》，以下部分列出了本产品中可能包含的有害
物质的名称和含量。
部件名称
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr (VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
外壳 O O O O O O
液晶显示屏 X O O O O O
电路板组件* X O O O O O
电源适配器 X O O O O O
电源线/连接线 X O O O O O
遥控器 X O O O O O
本表格依据SJ/T 11364 的规定编制。
*: 电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路、连接器等。
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。
上表中打“X”的部件，应功能需要，部分有害物质含量超出GB/T 26572规 定 的 限 量 要 求 ，但 符 合 欧 盟
RoHS法规要求（属于豁免部分）。
备注：上表仅做为范例，实际标示时应依照各产品的实际部件及所含有害物质进行标示。
10 环保使用期限
此标识指期限 (十年 )，电子电气产品中含有的有害物质在正常使用的条件下不会发生外泄或突变，电
子电气产品用户使用该电子电气产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限。
《废弃电器电子产品回收处理管理条例》提示性说明
为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终止时，请遵守国家废弃电器电子产品
回收处理相关法律法规，将其交给当地具有国家认可的回收处理资质的厂商进行回收处理，不当利用或
者处置可能会对环境和人类健康造成影响。
警告
此为 A级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对
干扰采取切实可行的措施。
警告：在居住环境中，运行此设备可能会造成无线电干扰。

65BDL3650Q/75BDL3650Q/86BDL3650Q
7
警語 : 使用過度恐傷害視力。
注意事項 :
(1) 使用30分鐘請休息10分鐘。
(2) 未滿2歲幼兒不看螢幕，2歲以上每天看螢幕不要超過1小時。
警告使用者 :
此為甲類資訊技術設備 , 於居住環境中使用時 , 可能會造成射頻擾動 , 在此種情況下 , 使用者會被
要求採取某些適當的對策。
警告：為避免電磁干擾，本產品不應安裝或使用於住宅環境。
Turkey RoHS:
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Ukraine RoHS:
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в
електричному та електронному обладнанні, затвердженого постановою Кабінету Міністрів України від 10 березня 2017 р.
№ 139
End-of-Life Disposal
Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your
product to increase the amount of reusable materials and to minimize the amount to be disposed of.
Please nd out about the local regulations on how to dispose of your old display from your local Philips dealer.
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations. For additional
information on recycling contact www.eia.org (Consumer Education Initiative)

65BDL3650Q/75BDL3650Q/86BDL3650Q
8
Waste Electrical and Electronic Equipment-WEEE
Attention users in European Union private households
This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing
used electrical and electronic appliances, this product may not be disposed of with normal household waste. You
are responsible for disposal of this equipment through a designated waste electrical and electronic equipment
collection. To determine the locations for dropping o such waste electrical and electronic, contact your local
government oce, the waste disposal organization that serves your household or the store at which you purchased
the product.
Attention users in United States:
Please dispose of according to all Local, State and Federal Laws. For the disposal or recycling information, contact:
www.mygreenelectronics.com or www.eiae.org.
End of Life Directives-Recycling
Your new Public Information Display contains several materials that can be recycled for new users.
Please dispose of according to all Local, State, and Federal laws.
65BDL3650Q/75BDL3650Q:
ENERGY STAR is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy
(DOE) that promotes energy eciency.
This product qualies for ENERGY STAR in the “factory default” settings and this is the setting in which power
savings will be achieved.
Changing the factory default picture settings or enabling other features will increase power consumption that
could exceed the limits necessary to qualify for ENERGY STAR rating.
For more information on the ENERGY STAR program, refer to energystar.gov.
Restriction on Hazardous Substances statement (India)
This product complies with the “E-Waste (Management) Rules, 2016” CHAPTER V, rule 16, sub-rule (1) . Whereas New Electrical
and Electronic Equipment and their components or consumables or parts or spares do not contain Lead, Mercury, Cadmium,
Hexavalent Chromium, polybrominated biphenyls and polybrominated diphenyl ethers beyond a maximum concentration value of
0.1% by weight in homogenous materials for lead, mercury, hexavalent chromium, polybrominated biphenyls and polybrominated
diphenyl ethers and of 0.01% by weight in homogenous materials for cadmium. except of exemptions set in Schedule 2 of the
Rule.
E-Waste Declaration for India
This symbol on the product or on its packaging indicates that this product must not be disposed of with your
other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and electronic equipment . The separate
collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources
and ensure that it is recycled in a manner that protects human health and the environment. For more information
about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to
know where you can drop o your waste equipment for recycling in India please contact on below given contact
details.
Helpline number: 1800-425-6396 (Monday to Saturday, 9 a.m. to 5:30 pm)
E-mail: [email protected]

65BDL3650Q/75BDL3650Q/86BDL3650Q
9
Batteries
For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household
waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in
accordance with legislation.
Please contact your local authority for details on the collection and recycling schemes.
For Switzerland: The used battery is to be returned to the selling point.
For other non-EU countries: Please contact your local authority for correct method of disposal of the used battery.
According to EU directive 2006/66/EC, the battery can’t be disposed improperly. The battery shall be separated to collect by local
service.
Após o uso, as pilhas
deverão ser entregues ao
estabelecimento comercial ou
e/ou baterias
rede de assistência técnica
autorizada.
Information for EAC
Month and year of manufacturing please refer information in Rating label.
Name and location of manufacturer ООО “Профтехника”
Адрес: 3-й Проезд Марьиной рощи, 40/1 офис 1. Москва, 127018, Россия
Importer and information
Наименование организации: ООО “Профтехника”
Адрес: 3-й Проезд Марьиной рощи, 40/1 офис 1. Москва, 127018, Россия
Контактное лицо: Наталья Астафьева,
[phone]
[e-mail]

65BDL3650Q/75BDL3650Q/86BDL3650Q
10
2. Unpacking and Installation
2.1. Unpacking
• This product is packed in a carton, together with the standard accessories.
• Any other optional accessories will be packed separately.
• As this product is high and heavy, the operation of moving the device is recommended to be performed by two technicians.
• After opening the carton, ensure that the contents are complete and in good condition.
■
Before Unpacking
• Please read and fully understand unpacking notice before installation.
• Please check the packing, there should be no any abnormality such as creak, dent mark…etc.
• Please do necessary inspection before you move the display out of the carton.
• Always install the display by experienced technician to prevent any damage.
■
Notice
• Take the display out of the carton box by two adults with both hands.
• Please do not grab or touch the glass of the display.
• Please hold on handles.
• Please keep the display vertically when moving it.

65BDL3650Q/75BDL3650Q/86BDL3650Q
11
• Place the display vertically and its weight should spread evenly on the surface.
• Please keep vertically, no bending and torsion during moving the display.

65BDL3650Q/75BDL3650Q/86BDL3650Q
12
2.2. Package Contents
Please verify that you received the following items with your package content:
• LCD display
• Quick start guide
• Remote control with AAA
batteries
• Power cord
• RS232 cable
• RS232 daisy chain cable
• HDMI cable
• IR sensor cable
• USB cover x1
• AC Switch cover
• Cable Clip x 2PCS
• Philips logo plate
* The supplied power cord varies depending on destination.
Power Cord RS232 Daisy Chain Cable RS232 Cable
IR Sensor Cable USB Cover
LCD display
HDMI Cable
Remote Control
and AAA Batteries
Quick start guide
Professional
DisplaySolutions
Q Line
65BDL3650Q
75BDL3650Q
86BDL3650Q
Philips logo
plate
Cable Clip
x 2PCS
AC Switch
Cover x 1
* Dierences according to regions.
* Display design and accessories may dier from those illustrated above.
NOTES:
• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and
complies with the safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm2 should be used).
• Keep the packaging materials appropriately after unpacking the product.
2.3. Installation Notes
• Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
• The product should be installed on a at surface, or the product may tip over. Leave a space between the rear of the product
and the wall for proper ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure to
do so may shorten the life of the internal parts.
• Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.

65BDL3650Q/75BDL3650Q/86BDL3650Q
13
2.4. Mounting on a Wall
To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use
a mounting interface that complies with TUV-GS and /or UL1678 standard in North America.
Protective Sheet
Table
VESA Grid
1. Prepare a at and horizontal surface that is larger than the display and spread a thick protective sheet on it to facilitate your
operation without scratching the screen.
2. Ensure you have all accessories for all types of mounting (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that came with the base mounting kit. Failure to follow the correct mounting procedures could result
in damage to the equipment, or injury to the user or installer. The product warranty does not cover the damage caused by
improper installation.
4. For the wall-mounting kit, use the M8 mounting screws (with a length 15 mm longer than the thickness of the mounting
bracket) and tighten them securely.
2.4.1. VESA Grid
65BDL3650Q 400(H) x 400(V) mm
75BDL3650Q 600(H) x 400(V) mm
86BDL3650Q 600(H) x 400(V) mm
Caution:
To prevent the display from falling:
• For wall or ceiling mounting, we recommend that you install the display with metal brackets which are commercially available.
For detailed instructions about the installation, refer to the guide provided with the bracket.
• To prevent the display from falling in case of earthquake or other natural disaster, please consult the manufacturer of the
bracket for the mounting location.
• As this product is high and heavy, the installation of this product is recommended to be performed by four technicians.
Required space for ventilation
Leave a space of 100 mm at the top, rear, right and left of the display for
ventilation.
Note: We recommend you contact a professional technician when
installing the display on a wall. We are not responsible for any
damage to the product if the installation is not performed by a
professional technician.
100 mm 100 mm
100 mm
100 mm

65BDL3650Q/75BDL3650Q/86BDL3650Q
14
2.5. Mounting in Portrait Orientation
This display can be installed in portrait orientation.
Rotate the display 90 degrees counterclockwise. The “ ” logo should be on the side when facing the display.
NOTE: The working hour in portrait mode is 18 hours per day.
90° 90°
2.5.1. How to remove the logo plate
1. Prepare a piece of paper with a cutting area of logo as a
protector to prevent the front bezel from scratching.
2. Use a knife and carefully remove the logo sticker with the
paper placing beneath.
3. Tear o the logo sticker.
123
NOTE: We recommend you contact a professional technician when installing the display on a wall. We are not responsible for
any damage to the product if the installation is not performed by a professional technician.

65BDL3650Q/75BDL3650Q/86BDL3650Q
15
3. Parts and Functions
3.1. Control Panel
1
9
2 3 4 5 6 7 8
1[ ] button
Press this button to turn the display On or turn the
display to standby mode.
2[MUTE] button
Press this button to mute the sound or reactivate sound.
3[INPUT] button
Choose the input source.
Conrm a selection in the OSD menu.
4[ ] button
Increase the adjustment while OSD menu is on, or
increase the audio output level while OSD menu is o.
5[ ] button
Decrease the adjustment while OSD menu is on, or
decrease the audio output level while OSD menu is o.
6[ ] button
Move the selected item one level up while the OSD menu
is On.
7[ ] button
Move the selected item one level down while the OSD
menu is On.
8[MENU] button
Return to the previous menu while the OSD menu is On.
This button can also be used to activate the OSD menu
when the OSD menu is O.
9Remote control sensor and power status indicator
• Receives command signals from the remote control.
• Indicates the operating status of the display:
- Lights green when the display is turned on.
- Lights red when the display is in standby mode.
- Lights amber when the display enters APM mode.
- When {SCHEDULE} is enabled, the light blinks green
and red.
- If the light blinks red, it indicates that a failure has
been detected.
- Lights off when the main power of the display is
turned o.

65BDL3650Q/75BDL3650Q/86BDL3650Q
16
3.2. Input/Output Terminals
456 7 139
8
11
10 12 14
15
17
16
100-240V
50/60Hz 2.5A
1 3
2
65BDL3650Q
86BDL3650Q
75BDL3650Q
100-240V
50/60Hz 2.5A
3 1
2
DVI-I IN
HDMI 2 IN
HDMI 1 IN
RS232
OUT
RS232
IN IR-IN IR-OUT
PC LINE IN USB 3.0
RJ45
AUDIO OUT
EXPANSION
SLOT
USB 2.0
USB 2.0
MICRO SD
1AC IN
AC power input from the wall outlet.
2MAIN POWER SWITCH
Switch the main power between On and O.
3AC OUT
AC power supply to the AC IN jack of a media player.
4HDMI1 IN / 5HDMI2 IN
HDMI video/audio input.
6DVI-I IN
DVI-I video input. VGA video input.
7PC LINE IN
Audio input for VGA source (3.5mm stereo phone).
8RS232 IN / 9RS232 OUT
RS232 network input / output for the loop-through
function.
10 IR IN / 11 IR OUT
IR signal input / output for the loop-through function.
NOTES:
• This display’s remote control sensor will stop working
if the jack [IR IN] is connected.
• To remotely control your A/V device via this display,
refer to page 25 for IR Pass Through connection.
12 RJ-45
The LAN control function is used for sending the remote
control signal from the control center.
13 AUDIO OUT
Audio output to external AV device.
14 USB 3.0
Connect to a USB storage device.
15 USB 2.0 / 16 USB 2.0
Connect to a USB storage device.
17 Micro SD card slot
Insert a micro SD card.

65BDL3650Q/75BDL3650Q/86BDL3650Q
17
3.3. Remote Control
3.3.1. General functions
1
2
3
5
7
8
17
9
11
10
13
15
12
14
16
4
6
1[
/
] POWER button
[ ]Turn the power On.
[ ]Turn the power O.
2[PLAY] buttons
Control playback of media les.(for Media Input only)
Freeze feature
Pause: hotkey for freezing all inputs content.
Play: hotkey for unfreezing all input content.
3[ ] HOME button
Root Menu: Go to the OSD of Main Menu.
Others: Exit from the OSD.
4[ ] SOURCE button
Root Menu: Go to the OSD of Video source.
5[ ] LIST button
Reserved.
6[ ] INFO button
Show Information OSD.
7NAVIGATION buttons
[ ]
Root Menu: Go to the OSD of Smart picture.
Main Menu: Move the selected item up to make
adjustment.
IR Daisy Chain Menu: Increase the controlled Group ID
number.
[ ]
Root Menu: Go to the OSD of Audio source.
Main Menu: Move the selected item bar down to make
adjustment.
IR Daisy Chain Menu: Decrease the controlled Group ID
number.
[ ]
Main Menu: Go to the previous level of menu.
Source Menu: Exit from the source menu.
Volume Menu: Decrease the volume.
[ ]
Main Menu: Go to the next level of menu or set selected
option.
Source Menu: Go to the selected source.
Volume Menu: Increase the volume.
8[ ] button
Root Menu: Go to the OSD of IR daisy chain in Primary/
Secondary mode.
Main Menu: Conrm an entry or selection.
9[ ] BACK button
Return to the previous page or exit from the previous
function.
10 [ ] MUTE button
Mute or unmute the sound.
11 [ ] [ ] [ ] [ ] COLOR buttons
[] Hotkey to turn on and o backlight.
12 [Number/ ID SET/ ENTER] button
Enter text for network setting.
Press to set the display ID. Refer to 3.3.2. ID Remote
Control for more details.
13 [ ] FORMAT button
Select image zoom mode from Full, 4:3, 1:1, 16:9, 21:9 or
Custom.
14 [ ] OPTIONS button
Reserved.
15 [ ] POINTER button
Reserved.
16 [ ] ADJUST button
Go to the OSD of Auto Adjust (for VGA only).
17 [ ] [ ] VOLUME button
Adjust the volume.

65BDL3650Q/75BDL3650Q/86BDL3650Q
18
3.3.2. ID Remote Control
Set remote control ID number when using several displays.
Press the [ID] button and the red LED blinks twice.
1. Press [ID SET] button for more than 1 second to enter the
ID Mode. The red LED lights up.
Press the [ID SET] button again will exit the ID Mode. The
red LED lights o.
Press the digit numbers [0] ~ [9] to select the display to be
controlled.
For example: press [0] and [1] for display No.1, press [1] and [1]
for display No.11.
The numbers available are [01] ~ [255].
2. If no button is pressed within 10 seconds, it will exit from
the ID mode.
3. If a wrong button is pressed, wait for 1 second until the
red LED lights o and then turns on again, then press the
correct digits.
4. Press [ENTER] button to conrm your selection. The red
LED blinks twice and then lights o.
NOTE:
• Press [NORMAL] button. The green LED blinks twice,
indicating that the display is under normal operation.
• It is necessary to set up the ID number for each display
before selecting its ID number.