Philips 14PT2010 User manual

1
14PT2010
21PT2010
14PT2010
21PT2010

2
Safety Information/UsefulTips...........................................................................3
Before Calling Service......................................................................................4
Hooking UpYourTV (Basic Connection).............................................................5
Use/Care of Remote Control ..............................................................................5
Connecting the Audio/Video Sockets (Playback) ................................................6
Functions of Remote Control .............................................................................7
Functions ofTV Controls...................................................................................8
TABLE OFCONTENTS
Introduction
Selecting the Main Menu...................................................................................9
Automatic Tuning of Channels ...........................................................................10
ManualTuningof Channels ................................................................................10
FineTuning of Channels ....................................................................................12
Selecting the Colour/Sound System ..................................................................13
Adjusting theTV Picture ...................................................................................14
Smart Picture Control .......................................................................................15
TV Installation
Basic Installation/Function
General
Specification.....................................................................................................16
Recycling Directive _ To minimise harm to the environment, the batteries
supplied with theTV set do not contain mercury or nickel cadmium. If possible,
when disposing of batteries, use recycling means available to you.Your TV set uses
materials which are reusable or which can be recycled.To minimise the amount of
waste in the environment, specialist companies recover used sets for dismantling and
collection of reusable materials (contact your dealer).
˵Ã÷Êé.p65 02-7-2, 17:412

3
Safety Information
•Disconnect mains plug when:
_ the red light below the TV screen is flashing continuously.
_a bright white line is displayed across the screen.
_cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp
chamois leather or soft cloth.
_there is a lightning storm.
_the set is left unattended for a prolonged period of time.
•No naked flame sources, such as lighted candles, should be placed on top of theTV or
in the vicinity.
•Do not place your TV set under direct sunlight or heat.
•Leave at least 5 cm around each side of TV set to allow for proper ventilation.
•Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or
water.
•No objects filled with liquids should be placed on top the TV so as to avoid dripping or
splashing of liquids on the set.
Useful Tips
• Do not leave your set on standby mode for a prolonged period of time. Switch off set to
allow it to be demagnetised. A demagnetised set supports good picture quality.
•Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
•Never attempt to repair a defective TV yourself. Always consult a skilled service
personnel.
SAFETY INFORMATION AND USEFUL TIPS
˵Ã÷Êé.p65 02-7-2, 17:413

4
BEFORE CALLING SERVICE
Below is a list of frequently occurred symptoms. Before you call for service, make these
simple checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom
• Switch off the TV by the mains power button.Wait for 20
minutes before switching on again.
• Check the TV is not placed too near speakers or mag-
netic objects.
Colour patch
(uneveness)
No power • Check theTV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug. Wait
for 60 seconds and re-insert plug. Switch on TV again.
• Check the antenna connection at the rear of the TV.
• Possible TV station problem.Try another channel.
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press
the Mute button on the remote control to restore sound.
No picture
Good picture
but no sound
Good sound but poor
colour or no picture • Try increasing the contrast colour and brightness setting.
Snowish picture and
noise • Check antenna connection at the rear of the TV.
Horizontal dotted lines • Possible electrical interference e.g. hairdryer, vacuum
cleaner, etc. Switch off appliances.
Double images or
“Ghost” images • Possible poor positioning of antenna. Using a highly directional antenna may improve reception.
TV not responding to
remote control handset • Check life span of batteries of remote control handset. • Aim remote control handset directly at remote control
sensor lens on the TV.
What you should do
˵Ã÷Êé.p65 02-7-2, 17:414

5
HOOKING UP YOUR TV (BASIC CONNECTION)
USE/CARE OF REMOTE CONTROL
Antenna Connection
• Connect the aerial plug to the antenna socket
T
on the backcover.
• Insert the mains plug into the wall socket.
Mains Connection
• For correct mains voltage, refer to type sticker at the
rear of the TV set.
• Consult your dealer if mains supply is different.
Note : This diagram is not representative of the
actual plug and socket.
Switch on the set
• Press the main power button to switch on/off theTV.
• If the set is on standby (indicator is red), press the
Power button on the remote control to switch on
set.
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right direction.
˵Ã÷Êé(ºÏ¶©±¾).p65 02-7-4, 13:165

6
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
You can view the playback ofVCR/VCD/DVD tapes by using the AUDIO andVIDEO INPUT
sockets on the side or rear of the TV.
Connect the VIDEO and AUDIO IN sockets on the side or rear of the TV to theVIDEO and
AUDIO OUT sockets on the audio/video equipment.
Note:
• For S-VIDEO IN and VIDEO 1 IN share the same channel, therefore can not be used
stimultaneously.
• S-VIDEO offers superior colour and detail reproduction over conventional video
connections.
˵Ã÷Êé.p65 02-7-2, 17:446

7
DISPL AY
SLEEP
SKIP
NORMAL
STANDBY MUT E
TV/AV
C
C
FUNCTION of REMOTE CONTROL
n
o
p
q
r
s
v
t
u
w
v
nStandby button
_ Switch the set off temporarily to standby mode.
(The red light indicator lights up when the set
is on standby mode).
_ To switch on set from standby mode, press
Channel +/- , or TV/AV, Standby button.
oDigit (0-9) / -/-- Buttons
_ Press 0-9 buttons to select a channel. For a 2-
digit channel number, press -/-- button fol-
low by the required digits.
pMute Buttons
_ Mute sound.To restore sound, press button
again.
qDisplay Button
_ Press to display the current channel NO. ,
colour and sound system.
rSleep Button
Allows you to select a time period after which
the set will switch to standby mode
automatically.This television can be programmed
up to 120 minutes (10 minutes intervals).
sSkip Button
Select an unwanted channel NO., press button
to skip.The channel number will be displayed
in red. Note:To restore the skipped channel,
press digit button or -/-- button to recall the
skipped channel NO., then press Skip button
to change the channel NO. from red to green
colour.
uTV/AV Button
To switch between TV channel and AV input
sources.
vVolume +/- Buttons
_ Increases or decreases volume.
_ Allows you to access the sub-menus and
adjust the settings.
wChannel +/- Buttons
_ Allows you to select channels in ascending
or descending order.
_ Allows you to select the next item in the
menu.
Menu Button
Display the main menu.Also exits menu from
screen.
w11
tNormal Button
To switch between the 4 picture settings:
DYNAMIC, STANDARD, MILD and MEMORY.
11
˵Ã÷Êé.p65 02-7-2, 17:467

8
FUNCTION OF TV CONTROLS
nMains Power button Switch mains power on or off
oRemote Sensor Acts as a sensor for activating the controls of the TV
when remote control handset is aimed at it.
pStandby light indicator Indicate red light when standby mode is activated.
•Select channel in descending/ascending order.
•Turn on the TV when it is in standby mode.
•Select the next item on the menu.
rVolume down/up button •Adjust sound volume softer/louder.
•Access sub-menu and adjusting the settings.
sMenu button •Enter the main menu.
tTV/AV button •Switch between TV channel and AV input sources.
•Turn on the TV when it is in standby mode.
CH.
Ø
qChannel down/up button
14PT2010
Ø
CH.
21PT2010
n
o
p
qrst n op
qrst
˵Ã÷Êé(ºÏ¶©±¾).p65 02-7-4, 12:408

9
SELECTING THE MAIN MENU
Operating instructions generally explains the operation of theTV set using
the buttons on the remote control unless otherwise stated. Please read the
following instructions carefully and follow the steps as shown to familiarise
yourself with the installations and all features available in your set.
Press the Menu button repeatedly to select the main menu PICTURE, MEMORY and SYSTEM.
Press once to enter PICTURE
main menu.
Press twice to enter MEMORY
main menu.
Press three times to enter
SYSTEM main menu.
PICTURE
COLOR 50
BRIGHT 50
CONT 100
SHARP 50
SELECTÇÈ ADJUSTÅÆ
V
MEMORY
AUTO SEARCH
MANUAL STORE
FINE TUNE
SELECTÇÈ CONFIRMÅÆ
V
SYSTEM
COLOR AUTO
SOUND BG
LANGUAGE
B.B ON
SELECTÇÈ ADJUSTÅÆ
V
Menu exit from screen.
Step Press button Result on screen
MENU
MENU
MENU
MENU
˵Ã÷Êé(ºÏ¶©±¾).p65 02-7-4, 12:479

10
Press twice to enter MEMORY
main menu. MEMORY
AUTO SEARCH
MANUAL STORE
FINE TUNE
SELECTÇÈ CONFIRMÅÆ
V
AUTOMATIC TUNING OF CHANNELS
Automatic tuning of channels allows you to store each programme automatically.
Press button repeatedly until
AUTO SEARCH is selected.
1 AUTO VHFL
STOPÅ
Start automatic tuning of
channels.
○○○○○○○○○○
Press button to stop tuning.
Note: when the tuning is
completed, the menu will quit
automatically.
MANUAL TUNING OF CHANNELS
Manual tuning allows you to select your preferred channel number for every available programme.
Press button repeatedly until
Manual Store is selected.
MEMORY
AUTO SEARCH
MANUAL STORE
FINE TUNE
SELECTÇÈ CONFIRMÅÆ
V
Press twice to enter MEMORY
main menu. MEMORY
AUTO SEARCH
MANUAL STORE
FINE TUNE
SELECTÇÈ CONFIRMÅÆ
V
Step Press button Result on screen
Step Press button Result on screen
MENU
MENU
˵Ã÷Êé.p65 02-7-2, 17:4710

11
Enter Manual Store menu.
Press button to manual tune
upward. Searching stops once
a transmitting signal is found.
MANUAL TUNING OF CHANNELS
Select POSITION.
Change the channel position
number.
Select STORE.
MANUAL
SEARCH DOWN
STORE ?
POSITION 01
SELECTÇÈ ADJUSTÅÆ
V
VHFL MANUAL UP
STOPÅ
○○○○○○○○○○
MANUAL
SEARCH DOWN
STORE ?
POSITION 02
SELECTÇÈ ADJUSTÅÆ
V
MANUAL
SEARCH DOWN
STORE ?
POSITION 02
SELECTÇÈ CONFIRMÅÆ
V
MANUAL
SEARCH DOWN
STORE OK
POSITION 02
SELECTÇÈ CONFIRMÅÆ
V
Press button to confirm
Notes:
•When a channel is found, it can be stored into any channel position number as your desired.
•Manual searching direction can be both upward or downward. This can be choosen by pressing the
VOLUME or VOLUME button to start the searching.
•To stop manual tuning, press VOLUME button when searching upward, or press VOLUME
button when searching downward.
Press button to exit menu
from screen or menu will quit
after a few seconds without
further action.
9
Step Press button Result on screen
MENU
˵Ã÷Êé.p65 02-7-2, 17:4711

12
This feature allows you to adjust picture reception in areas of weak reception.
FINE TUNING of CHANNELS
MEMORY
AUTO SEARCH
MANUAL STORE
FINE TUNE
SELECTÇÈ CONFIRMÅÆ
V
Fine tune the channel upward.
Fine tune the channel downward.
MEMORY
AUTO SEARCH
MANUAL STORE
FINE TUNE
SELECTÇÈ CONFIRMÅÆ
V
VHFH FINE TUNE UP
EXIT: MENU ADJUST ÅÆ
○○○○○○○○○○
VHFH FINE TUNE DOWN
EXIT: MENU ADJUST ÅÆ
○○○○○○○○○○
Press button to exit menu
from screen or menu will quit
after a few seconds without
further action.
Press button repeatedly until
Fine Tune is selected.
Press twice to enter MEMORY
main menu.
Step Press button Result on screen
MENU
MENU
˵Ã÷Êé.p65 02-7-2, 17:4712

13
SELECTING THE COLOUR/SOUND SYSTEM
This feature allows you to select your desired Colour and Sound system. If Auto is selected, the
respective colour system will be automatically selected according to the transmission system. Note:
Select your desired colour system manually if reception is poor at Auto mode.
Select the desired colour sys-
tem (AUTO, PAL, SECAM,
NTSC4.43 or NTSC3.58).
Proceed to select SOUND.
Press button to exit menu
from screen or menu will quit
after a few seconds without
further action.
Press button repeatedly until
COLOR is selected.
Press three times to enter
SYSTEM main menu.
SYSTEM
COLOR AUTO
SOUND BG
LANGUAGE
B.B ON
SELECTÇÈ ADJUSTÅÆ
V
SYSTEM
COLOR PAL
SOUND BG
LANGUAGE
B.B ON
SELECTÇÈ ADJUSTÅÆ
V
SYSTEM
COLOR PAL
SOUND BG
LANGUAGE
B.B ON
SELECTÇÈ ADJUSTÅÆ
V
SYSTEM
COLOR PAL
SOUND DK
LANGUAGE
B.B ON
SELECTÇÈ ADJUSTÅÆ
V
Select the desired sound sys-
tem (BG or DK).
Note : the above procedures are also applicable to the following functions:
•B.B (blue backgroud): sets this function on or off. When B.B is selected to ON mode, it will display
a solid blue screen when a channel is selected that has no signal.
Step Press button Result on screen
MENU
MENU
•LANGUAGE selection: you can select Chinese or English OSD.
˵Ã÷Êé(ºÏ¶©±¾).p65 02-7-4, 12:5013

14
ADJUSTING THE TV PICTURE
This picture menu allows you to make adjustments to the picture.
Adjust level or select desired
setting.
Press button to exit menu
from screen or menu will quit
after a few seconds without
further action.
Select item.
Press once to enter PICTURE
main menu.
PICTURE
COLOR 50
BRIGHT 50
CONT 100
SHARP 50
TINT 50
SELECTÇÈ ADJUSTÅÆ
V
Picture menu items Activities
COLOR Increase or decrease colour level.
BRIGHT Increase or decrease brightness level.
CONT Increase or decrease contrast level.
SHARP Increase or decrease sharpness level to
improve detail in picture.
PICTURE
COLOR 50
BRIGHT 50
CONT 100
SHARP 50
TINT 50
SELECTÇÈ ADJUSTÅÆ
V
PICTURE
COLOR 50
BRIGHT 30
CONT 100
SHARP 50
TINT 50
SELECTÇÈ ADJUSTÅÆ
V
TINT(for NTSC only) Increase or decrease tint of NTSC picture.
Step Result on screen
MENU
MENU
Press button
˵Ã÷Êé.p65 02-7-2, 17:4714

15
SMART PICTURE CONTROL
Whether you are watching a movie or video game, your TV has automatic video control settings
matched to your current program source or content.The Smart Picture feature quickly resets your
TV’s video controls of program for a number of different types of programs and viewing conditions
you may have in your home. Each Smart Picture setting is preset at the factory to automatically adjust
the TV’s Brightness, Colour, Picture and Sharpness levels.
Press button repeatedly to cycle through the 4 settings
namely, MEMORY, DYNAMIC, STANDARD & MILD and
select your desired picture setting.
Definition of Picture settings
MEMORY : picture settings are set to your preference.
DYNAMIC : Emphasize very vibrant colours.This set-
ting is the optimal setting when you are
viewing TV programmes in a brightly-lit
room.
STANDARD : Emphasize original colours.
MILD : Emphasize “warm”colours.
(Suitable for dimly-lit room condition and
gives cinema-like effect when light is
switched off).
MEMORY
DYNAMIC
STANDARD
MILD
NORMAL
Step Press button
˵Ã÷Êé.p65 02-7-2, 17:4715

16
SPECIFICATION
14PT2010
Picture tube screen size (diagonal) 37cm
Audio Output:
speaker 2 x 2W
TV system PAL BG
PAL DK
SECAM BG
SECAM DK
Playback System NTSC3.58, NTSC4.43
Set Dimension
Width
Depth
Height
331
441
367
Net weight of Set (approximate) 10kg
Note
For Operating Voltage, Frequency, Power Conumption, refer to the type number at the rear of the
set.
21PT2010
54cm
2 x 4W
600
456
372
21kg
˵Ã÷Êé(ºÏ¶©±¾).p65 02-7-4, 13:0716