VR 750
VR 750
6 Head Hi-Fi Stereo Video Recorder
Product information
Reception - Installation
• Tuner: Hyperband, UHF,VHF
• Tuning - Presets: PLL, CH entry, 99 presets
• Tuning - Install Features: Auto Search, Auto Install
• TV Related Functions: 16:9 (pin 8), Direct Record, Follow TV
• Time/Date Download: PDC (Time/Date),Text (Time)
User Interface
• Record Speed: Long Play, Standard Play
• Record Speed Selection: Auto LP, Per Menu
• Picture Improvement System: Digital Studio Picture Control, Smart Picture
• Audio Recording Level: Automatic
• Special Features: Auto Standby, Channel Name Display
On Tape Standard
• Additional Playback Standard: NTSC Playback on PAL TV
Remote Control Unit
• Remote Control - Type Number: RT306/111
• Remote Control - Codes: VCR1,TV Commands
Connectors Rear
• EXT1: Black, Euro CVBS in/out
• EXT2: Black, Euro CVBS in, Euro Decoder
• Rear Audio Connector: Cinch stereo out
• Terrestrial Antenna In/Out: 75 Ohms (IEC type)
Connectors Front
• Front A/V Connectors: Cinch CVBS in, Cinch Stereo in
Tape Deck
• Number of Video / FM Audio / Flying Erase Heads: 4 / 2 / 0
• Play: +1
• Still Features: Perfect
• Index Related Functions: Next/Prev. index search
• Head Cleaning: Automatic
• Tape Length Recognition: Automatic
• Tape Counter: Linear Relative (h.m.s),Tape Position Indicator,Time Left (h.m)
• Winding / Rewinding Time (E180): 70 sec.
Programming
• Number of Events: 8/year
• Special Timer Programming: Turbo Timer
• Record Link: SCART 2
General
• Voltage: 198 - 264 V
• Frequency: 50Hz
• Standby Power Cons.: <3 W
• Backup Presets: 1yr
• Backup Clock - Calendar - Timer Event: 1mn
• Set Size - W x D x H in mm: 435 x 226 x 92
• Packaging - W x D x H in mm: 501 x 307 x 180
• Equipement Supplied: Aerial Cable, Batteries for RC
Subject to modification without notice
ShowView and Video+ are registered Trademarks of Gemstar Development Cooperation.
VR750/58 VR750/39 VR750/16 VR750/07 VR750/02
TV Systems Off Air PAL B/G, PAL D/K, PAL B/G, SECAM B/G, PAL B/G PAL I PAL B/G
SECAM B/G, SECAM D/K SECAM L/L´
Sound Systems German Stereo, Mono, German Stereo, Mono, German Stereo, Mono, Mono, NICAM German Stereo, Mono
NICAM NICAM NICAM
OSD Menu Languages Czech, English, Hungarian, Dutch, French, German Dutch, English, French, English Dutch, English, French,
Polish, Russian Cyrillic German, Italian, German, Italian,
Spanish, Swedish Spanish, Swedish
Record / Playback Standard MESECAM, PAL MESECAM, PAL, SECAM PAL PAL PAL
Record Control & PDC, VPS PDC, VPS PDC, VPS PDC PDC, VPS
Transmitter Identification
Programming System Showview, Manual Timer Showview, Manual Timer Showview, Manual Timer
VideoPlus +, Manual Timer
Showview, Manual Timer
Product Highlights
• SMART Picture
Smart Picture puts you in control and gives you the chance to adjust the picture
quality to your personal taste.
You can adapt the picture rendition to the quality of tape used or the tape content
itself. You can, for instance, filter out the noise of a poor rental tape or increase the
details on a high quality recording.
• New Turbo Drive deck
The new Turbo Drive deck offers:
Speed
70-second ultra fast rewind speed.
Reliability
To guarantee an optimum reliability, the heads are automatically cleaned each time
a cassette is inserted or ejected.
Intelligence
The Tape Position Indicator, in wind and re-wind situations, displays the accurate
position of the tape on the screen and indicates progress by means of
a moving/blinking arrow. At any time, you can follow the tape movement on
the screen.
• Turbo Timer
„Turbo Timer“ is a real time-saver for programming a timer for the next 24 hours:
• No need to switch the TV „on“
• All necessary information visible on the VCR display
• 1 minute accuracy
• Minimum of steps
• All steps are carried out using the remote control avoiding the need for bending
down to the VCR.
• Record Link
„Record link“ is the answer if you want to record a programme from your satellite
receiver or any other external device when you are not at home.
To prepare for a recording only the timer of the satellite receiver needs to be
programmed. The VCR will automatically detect the activation of the satellite receiver
via the Scart cable connection and will start recording simultaneously. If the receiver
gets deactivated again, the recording will also stop.
www.philips.com
pww.videq.ce.philips.com
