Philips VRX222AT User manual

VCR PLUS+™ PROGRAMMING Simplifies VCR
programming by allowing you to merely enter
PlusCode®programming numbers found in
many published television listings
CLOCK/FUNCTION DISPLAY Alerts
the user to all important recording and
playback conditions, correct time,
counter position, tape speed, and
channel number
DIGITAL AUTO TRACKING SYSTEM
Automatically seeks the optimum
tracking position and optimum audio
signal for clearest picture and sound
ONE-TOUCH RECORD Record up
to eight hours or to the end of the tape
with the touch of a single button. Each
touch of the OTR button adds 30
minutes of additional recording time
FULL AUTO-FEATURE PACKAGE
• Power On
• Digital Auto Tracking
• Auto Play
• Auto Repeat
• Auto Rewind
• Auto Eject
• Auto Power Off
VIDEOCASSETTE RECORDER WITH VCR PLUS+™ PROGRAMMING
VRX222AT
VRX222AT
Multifunction
Infrared
Remote
Recorder
Recorder
Videocassette
Videocassette

• Power On
• Digital Auto Tracking
• Auto Play
• Auto Repeat
• Auto Rewind
• Auto Eject
• Auto Power Off
INTERNET ADDRESS: http://www.philipsmagnavox.com
additional
features:
Videocassette Recorder with VCR Plus+TM Programming
VRX222AT
UPC: 037849848432
Product Dimensions: 14.2"W x 3.6"H x 9.2"D
Product Weight: 5.94 lbs.
Carton Dimensions: 16.8"W x 6.4"H x 12.2"D
Carton Weight: 8.1 lbs.
Master Pack: 1
Contains: Two-Head Videocassette Recorder, Multifunction
Remote Control w/Batteries, RF Coaxial Cable, Operating
Instructions, Warranty Information
Printed in U.S.A.
©1997 Philips Consumer Electronics Co.
A Division of Philips Electronics North America Corp.
Specifications subject to change without notice.
Visual Communications, Philips Consumer Electronics Co.
VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation.
The VCR Plus+ system is manufactured under license from Gemstar
Development Corporation.
AUTOMATIC CHANNEL SETUP Activating this
feature allows the VCR tuner to scan through
television frequencies, automatically storing active
broadcast channels into memory.Then, only active
channels programmed into memory are tuned, using
the channel up/down buttons on either the remote
or front panel of the VCR. Automatic channel preset
can be repeated whenever desired, should new
channels become available. Channels can be manually
added or deleted.
181-CHANNEL FS TUNING The digital quartz
tuner is capable of receiving up to 181 channels,
including UHF, VHF, and 113 cable channels, without
the inconvenience and expense of a cable company
decoder/converter (on non-scrambled cable systems).
Channel tuning is by random access with the remote
control transmitter or scan tuning up and down by
remote or at the set.
CLOCK/FUNCTION DISPLAY Continuously alerts
the user to all important recording and playback
conditions, correct time, counter position, tape
speed, channel number, etc. When the VCR is
turned off, the time display automatically dims, to
make it less distracting.
BILINGUAL (ENGLISH/SPANISH) ON-SCREEN
FUNCTION DISPLAY Indicates record/playback
functions, channel number, clock setting, date,
counter, programming, one-touch record, and record
standby, keeping the user alerted to the status of all
features in a heads up, on-screen display.
ON-SCREEN, REAL-TIME COUNTER Unlike the
0000 to 9999 tape counters found in standard VCRs,
this unit incorporates a linear, real-time counter
which shows elapsed recording and/or playback time
in hours, minutes, and seconds.
TIMER/PROGRAMMER BACKUP SYSTEM Retains
timer programming information for up to one full
minute in the event of momentary power
interruptions.
convenience:
REPEAT PLAY When the VCRrecognizes no
recorded signal or reaches the end of a tape with the Repeat
Play control activated, it will automatically rewind to the
beginning and enter the Play mode again. Repeat Play can be
discontinued by touching the button a second time or by
changing operation mode.
QUICK START MECHANISM Quickly and
effortlessly switches the tape mechanism from Stop to
Play in only one second, instead of the approximately
5 1/4 seconds of older models.
AUDIO/VIDEO INPUT/OUTPUT JACKS Connect
your VCR to the direct audio and video inputs of a
television receiver or monitor equipped with input
jacks, for better picture and sound quality during tape
playback. Jacks also allow a second VCR to be
connected for editing and/or duplicating personally
recorded, non-copyrighted videotapes.
15X FORWARD/REVERSE LATCHING SEARCH
Search in forward or reverse mode at 15 times
normal playing speed in SLP, and 5 times normal in
SP. The Latching Search feature provides continuous
forward or reverse search with a single touch of the
control. A second touch stops the search operation
and returns the unit to the Play mode.
MULTIFUNCTION INFRARED REMOTE Controls
all operating features and functions of this VCR with
armchair convenience–including all special features,
random channel access, and channel scan up/down,
providing an LED virtual “handshake” for confirmation.
VCR PLUS+™ PROGRAMMING Simplifies
VCR programming by allowing you to simply
enter PlusCode®programming numbers found
in many published television listings. When
recording begins, your VCR automatically selects
the proper TV channel and program length.
Backup memory logic retains the cable channel
guide map indefinitely, even during a power
failure or when the VCR is disconnected from
its power source.
ONE-TOUCH RECORD Record up to eight
hours or to the end of the tape with the touch of
a single button. Each touch of the OTR button
adds 30 minutes of additional recording time.
8-EVENT/1 YEAR SMART PROGRAMMING
Program your VCR for unattended recording of
up to eight separate programs over a full 365-day
period. No manual setting, adjusting, or
programming of the calendar function is required.
REMOTE CONTROL ON-SCREEN MENU
PROGRAMMING Program by remote control
for unattended recording, with programming
instructions on-screen for visual verification.
On-screen menus lead you through normal,
daily, or weekly programming by program
number, channel to be recorded, start and stop
times, speed, and date of recording by day,
month, and year. Pushing the CLEAR button
allows you to go back and reprogram over
mistakes, and pushing the MENU button at the
end of programming verifies that instructions
are locked into memory.
DIGITAL AUTO TRACKING SYSTEM When
tape playback begins, this feature automatically
seeks the optimum tracking position in the
tracking range, and the optimum audio signal
tracking position for clearest picture and sound
from videotapes. Controls are provided on the
remote transmitter to give you manual control
should tracking adjustments be necessary.
picture:
programming &
record/playback
features:
remote control:
special effects: