Phistek P150PR Installation and operating instructions

20160126 V3 1

UserManual/InstallationGuide
ModelNo.P150PR/P150PG/P150ER/P150EG

Warning!Itwillcausemalfunctionifthemonitorisoperatingwithunspecifiedpowersupplyadaptor
orincorrectpowervoltage.Donotexposethisunitintherainormoistureenvironmenttoreducethe
riskoffireorelectricshock.
PRECAUTIONS
Donotusethemonitornearwater.
Donotplacethemonitoronanunstablecart,stand,ortable.Ifthemonitorfalls,itcaninjurea
personandcauseseriousdamagetotheappliance.Useonlyacartorstandrecommendedbythe
manufacturerorsoldwiththemonitor.Ifyoumountthemonitoronawallorshelf,useamounting
kitapprovedbythemanufacturerandfollowsthekitinstructions.
Themonitorshouldbeoperatedwithtypeofpoweradaptorindicatedonthelabel.
Normallyitispackedwithmonitor,orusinganadaptorapprovedbythemanufacturer.
Unplugtheunitduringalightningstormorwhenitwillnotbeusedforlongperiodsoftime.This
willprotectthemonitorfrombeingdamagedduetopowersurges.
Neverspillliquidsonthemonitor.
Donotattempttoservicethemonitoryourself;openingorremovingcoverscandamagetothe
monitororpanel.Pleasereferallservicingtoqualifiedservicepersonnel.
ForWallmountadaptor,wallsocketshallbeinstalledneartheequipmentandshallbeeasily
accessible.



20160126 V3 2
Index:
I. Introduction‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3
Features‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3
Unpackthemonitor‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4
CheckAccessories‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 4
II. Recommendednetworkapplicationandsetting‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5
BasicExtendedMode(orMirrorMode)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 6
ZeroClientwithWMS2012Multipoint‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 9
III. DriversInstallation‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 10
InstallEliteUSBServer‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 10
InstallSMSCDriver‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 12
InstallEETITouchDriver(ForTouchscreenmodelsonly)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 14
IV. ControlButtons/Connectors‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 18
V. Foryoursafety‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 21
VI. Supporttimingchart‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐21
VII. USBHub‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 22
VIII. PowerOverEthernet(PoE)Powersupply‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 22
IX. AudioFunction‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐22
X. ResistiveTouchPanel:(ForTouchMonitoronly)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐22
XI. Mechanicaldimension‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 23
XII. EMCWarningStatement‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 24
FCCClassAWarning‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 24
CISPR22classAWarning‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐24
XIII. ProductGeneralSpecification‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 25

Appendix:NetworkIPaddresssetting‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐26













I. Introduction

20160126 V3 3
P150PR(PG,ER,EG)isaZeroClientAudio/VideooverEthernetDisplay,designedasanendpointofa
PCsharingsolutionsuchasWindowsMultiPointServer2012.
WithWindowsMultiPointServer2012,itcanworkasastandaloneworkstation.
ThesolutionenablesahostPC(Server)tocommunicatewithmultipleandindependentstations.
EachstationisconsistedofoneP150PR(PG,ER,EG)Monitor(zeroclient)withakeyboard,mouse,
andmonitorconnected,allowingmultipleuserstosharetheresources/computingofonesingle
server.

BysimpleEthernetconnection,theserverprovideseachstationuserwithafamiliarand
independentWindows®experience.

P150seriesModelandfunctiontablelistedasbelow:






P150x
x,representP150PR,P150PG,P150ER,P150EG

Features
-15inchdiagonalscreenwithnativedisplayresolution1024X768.
-SimpleEthernetconnectionincludeVideo,Audio,andotherUSBdevices
IncludepoweroverEthernetforPR/PGModels
-SimplePlugandPlay:
Justattachakeyboard,mouse,toyourP150xxandconnectittothehostserver.
Astationissetupeasilyandreadyforuserightaway
-Fullflatfrontpanelwithhighqualityresistivetouchpanel.
-Headphoneoutput
-Microphoneout
-Build‐inUSB2.0Hub:x3USBdownstreamports
-Build‐inAudiofunction;optional2Wspeakersperchannel.
-5WiresResistiveTouchPanelControlFunction.(forTouchMonitoronly)
-FullyGlossysurfacethroughoutmonitor’sappearance.
-Rimlessfrontbezeldesign,spill&dustproof,
-Cablemanagementdownroutingthroughthemountingstand.

Unpackthemonitor
-Putthemonitoronacleansurface;makesuretheboxinuprightposition.
-Removepackingmaterialsfrominsideofbox.
ModelPoEpowersupply Resistivetouch
panel
Protectivecoverlens
P150PRYesYesNA
P150PGYesNAYes
P150ERNAYesNA
P150EGNANAYes

20160126 V3 4

Checkaccessory
Pleasemakesuretheentireaccessoryisincluded:












Power Adaptor for Non PoE ModelP150PR/ER/PG/EG
User guide & Driver CD
Mini USB to USB A type cable
P150PR/ ER/PG/EG

20160126 V3 5
II. Recommendednetworkapplicationandsetting:
ThePhistekP150PR/PG/ER/EGcanbeconfiguredtothefollowingmodes:
-BasicExtendedmode











-ZeroClientWithWMS2012Multipoint







1. BasicExtendedMode(orMirrorMode):
Ethernet(LAN)networkconnection
LANcable LANcable LANcableLANcable
LANcable

HostPCGigabitLANswitch
P150xx
Monitor
Display1
P150xx
Monitor
Display2
P150xx
Monitor
Display3
P150xx
Monitor
Display4

20160126 V3 6
PleasenotethatExtendedmodeonlyprovideextendedfunctionofvideodisplay,audio,
USBports.
1.1SetUpProcedures:
1.1.1RequiredHardwareIngredients
TheP150xxZero‐Client:typicallyavailabledirectlyfromPHISTEK.
Thehostcomputer:shouldbescaledaccordingtotheusagescenarios

CPUInteli7Inteli5Inteli3InelAtomD525
DRAM8G8G4G2G
OSWin764bitWin764bitPOSReady7POSReady2009
Video1080p8sets(max)6sets(max)0set0sets
Video720p8sets(max)8sets(max)1sets(max)0sets
Photo1920x10808sets(max)8sets(max)4sets(max)4sets(max)


1.1.2TheLANnetwork:10/100Mor1000MEthernet,recommendGigabit‐Switched,and
ideallyhavingadedicatedswitchpereachcluster.

1.2Installation:
Part1:WindowsOSPreparations
1) RunWindows‐Updateandinstallallavailableupdates.
2) Makesuretoinstallthelatestdriverforthegraphiccard(appliestoon‐boardaswell).
3) TurnoffWindows‐Updatedevicedriversearching
http://technet.microsoft.com/en‐us/library/cc753091.aspx

Part2:EliteDriverinstallation:
1) InstallEliteDriver(SeePage12,SectionIII,2.0)
2) Rebootyourcomputer

Part3:SMSCDriverInstallation&prepareP150P(/E)Zero‐Client
1) InstallSMSCdisplaydriver(SeePage14,SectionIII,3.0)
2) ConnectallZero‐ClientstoEthernetSwitch.
Connectmonitors,keyboards,mouseandsounddevicestoeachP150P(/E)Monitor.

3) LaunchtheNetworkUSBSettingUtilityfromitsdesktopshortcut.
NetworkUSBSettingUtilityshortcut

20160126 V3 7
4) ThisprogramwillsearchforP150P(/E)Zero‐Clients:


















5) Click“Configuration”,youcansetIPv4toStaticIPorDHCP

6) Pereachcluster,pereachP150P(/E)terminal:
Click“AssigntothisPC”:




7) WindowswillidentifyandinstallUSBsounddriver.

8) Adialogwillpopup–searchforP150P(/E)ZeroClientsoftware–clickcancel.


20160126 V3 8
9) Eachclientconnectionwillbecompletedasbelow:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


10) Atthisstage,youshouldbeabletoseealltheassignedmonitorsinactiveWindows
Desktopmode.








11) Start“ViewSpanConfiguration”intheTask‐Bar.
Makesuretosetallextramonitorsas“Extended”


20160126 V3 9

12).Setupmaximumno.zeroclientsinapplication
AfterSMSCdriverinstallation,thesystemwillsetnumberofzeroclientsinapplicationat”4”
Ifuserwantstoconnectformoreclients,userneedtoexecute“regedit.exe”
Simplyinput“regedit“tosearchthisapplication.
Thenfollowtheroute:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/sgfxk:
MAxNumberOfUsbAdaptersREG_DWORD 0x00000004(4)
Thedefaultnumberis4,clickMAxNumberOfUsbAdapterstochangenumber.
ThenumbersofclientstousedependontheHostPCresources,
Recommendmaximumnumberset<10

2. ZeroClientwithWindowsMultiPointServer2012
2.1 WithWindowsMultiPointServer2012,zeroclientscanworkindependentlyas
standalonePC
2.2 PlsvisitMicrosoftWebsiteforWindowsMultiPointServer2012Evaluation.
togetimageandinstallationguide.
http://www.microsoft.com/en‐us/download/details.aspx?id=35821
Inadditiontotheimage,plsvisitPhistekwebsitetodownloadfollowingdrivers
EliteDriverforwms2012:
GenericWMSZeroClientService_Setup_13_1217_S0122_G1042_Cert
SMSCdriverforwms2012:
SetupSgfxWmsFbr‐5_3_60_8411
Patchfile:
WMS‐KB2791647‐ENU‐x64
Pleasemailto:[email protected]togetdownloadaccountandpassword.
TherecommendedPCSystemequipment:
MinimumbasePCsystemrunningRDSH(formerly“TerminalServices”)desktops
(supportingupto4lightlyloadedstations):
DualCoreProcessorand1coreorthreadforeachtwostations
2GBMemoryand0.5GBofmemoryperstation
20GBdiskspace

20160126 V3 10
III. DriversInstallation:
TheattachedCDincludesthreedriversforinstallation:
EliteUSBServer(forextendedmode)
SMSCDriver(forextendedmode)
EETITouchDriver(ForTouchscreenmodelsonly)

1.0 InstallEliteDriver:USBServer:
P150PR/GR/ER/EG:EliteUSBServer














1.1 Installationisautomaticallyrunasbelow:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
