The CMM remote display is designed for measuring and displaying Panel Current, Load
Current and Battery Voltage for Phocos CA, CML and CMLNL series charge controllers.
Clear, readable 3-digit LCD display
3 position switch to select which value to be displayed
3 LEDs to show which value is displayed by LCD
Prepared for DIN rail and wall mounting
2 meters long connecting wire
The CMM remote display contains 3 parts, the display module, the measuring module
and the data cable. The Measuring module measures the PV Current, the Battery Voltage
and the Load Current. The display module displays the measure on the 3-digit LCD
Display.
This product is intended for indoor use only. Protect it from direct sunlight and place
it in a dry environment. Never install it in humid rooms (such as bathrooms .
General Features
Description of Functions
Mounting and Connecting
12