FEATURES * For complete manuals, technical tips, FAQ’s, system diagrams and new product information visit us @
LIMITED WARRANTY
Phoenix Gold International, Inc. (or "Phoenix Gold")
warrants its products against defects in materials and
workmanship for a limited period of time.
For a period of one (1) year from date of original purchase, we
will repair or replace the electronic product, at our option,
without charge for parts and labor. The limited warranty period
is EXTENDED to three (3) years from date of original purchase
if the product was originally installed by an authorized Phoenix
Gold electronics dealer and accompanied by a valid sales
receipt showing a charge for installation. Customer must pay all
parts and labor charges after the limited warranty period
expires. The limited warranty period for factory refurbished
products expires after ninety (90) days from date of original
purchase. This limited warranty applies only to purchases from
authorized Phoenix Gold Electronics/Speaker retailers.
This limited warranty is extended only to the original
purchaser and is valid only to consumers in the United States.
Consumers are required to provide a copy of the original sales
invoice from an authorized Phoenix Gold dealer when making a
claim against this limited warranty. This limited warranty only
covers failures due to defects in materials or workmanship that
occur during normal use. It does not cover failures resulting
from accident, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, modification,
service by anyone other than Phoenix Gold, or damage that is
attributable to Acts of God. It does not cover costs of
transportation to Phoenix Gold or damage in transit.
This warranty will become void if the serial number
identification has been wholly or partially removed, altered or
erased. Repair or replacement under the terms of this warranty
does not extend the terms of this warranty.
Should a product prove to be defective in workmanship or
material, the consumer's sole remedies will be repair or
replacement as provided under the terms of this warranty.
Under no circumstances shall Phoenix Gold be liable for loss or
damage, direct, consequential or incidental, arising out of the
use of or inability to use the product. There are no express
warranties other than described above.
8100.0251 A
• TCCHtm Thermal Convection Cooled Heatsink. This proprietary design
uses a variable speed fan to ensure that the Titanium amplifiers keeps its cool when the music gets hot!
• TAIMtm Timed Acoustically Integrated Muting. Ensures dead silent turn
on and turn off. No clicks, pops or buzzes.
•Output current sensing allows the Titanium amplifiers to automatically optimize the power supply and output
stage to reliably operate at
impedances as low as 2 ohms bridged or 1 ohm stereo.
•24dB per octave, high pass or low pass crossover. Continuously variable from 40 Hz to 800 Hz.
•Auxiliary outputs route high pass, low pass or full range signals to another amplifier.
• Twin-Ttm Bass Boost circuit provides up to 18dB of boost at 45 Hz.
• Optional LPL44tm Low Pass Level controller allows the driver to adjust bass volume from the driver’s seat.
• Optional RDDPtm Remote Diagnostic Display Panel uses two tri-color LED’s allowing the driver to monitor the
amplifier’s battery voltage, power-on, thermal and overload status.
• Optional SDTtm Superior Digital Technology allows the driver to monitor the amplifier’s battery voltage with a
vacuum florescent display along with a tri-color LED indicating power-on, thermal and overload status.
• Optional RMD Remote Monitoring Display allows system voltage to be displayed anywhere in the vehicle.
SPECIFICATIONS
Continuous Output Power at 1% THD (Wrms):
Titanium 1000.2
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) 100 x 2
Into 4 ohms Stereo @ 14.4 Vdc 250 x 2
Into 2 ohms Stereo @ 14.4 Vdc 500 x 2
Into 4 ohms Bridged @ 14.4 Vdc 1000 x 1
Recommended Fuse Size 80 amp
Dimensions, Overall (inches) 25.50 L x 10.00 W x 2.25 H
Common Specifications
Frequency Response . . . . . . . . . . . .±1dB, 20Hz to 20kHz
Signal to Noise Ratio (A-weighted) . . . . . . . . . . . . .>110dB
Input Sensitivity . . . . . . . . . . . . . . . .100 millivolts to 6 volts
Crossover Frequency . . . . . . . . . . . . . . . . .40Hz to 800Hz
Crossover Slope . . . . . . . . . . . . . . . . . . .24dB per Octave
Bass Boost . . . . . . . . . . . . . . . . . . . . .0 to +18dB @ 45Hz
DC Input Voltage Range . . . . . . . . . . .10 volts to 15.5 volts
Typical Current Draw at Idle . . . . . . . . . . . . . . . . .<4 amps
Minimum Bridged Load . . . . . . . . . . . . . . . . . . . . . .2 ohms
Minimum Stereo Load . . . . . . . . . . . . . . . . . . . . . . .1 ohm
Due to ongoing research and development, features, specifications and availability
are subject to change without notice.
Titanium 1000.2 2 Channel Amplifier
PHOENIX GOLD INTERNATIONAL
9300 North Decatur
Portland, OR 97203
Tel: 503.286.9300
Fax: 503.978.3380
www.phoenixgold.com
