PHOTONIS PD-PRO-16M User manual

Quick Start Guide
Download the full maintenance manual
using the QR Code provided above.
Night Vision
Quick Start Guide
Monocular Night Vision Device
Night Vision
Maintenance of the PD-PRO-16M
Cleaning Instructions:
1. Remove any dust and dirt using a cleaning brush or air pressure.
2. If available, apply a light coat of demist compound to the lenses and wipe o with a clean annel cloth.
NVG Inspection:
1. Inspect NVG lenses for cracks, scratches or chips.
2. Check that the range focus ring rotates freely in both directions.
3. Check that the threads (for sacricial window) on the objective and eyepiece housing are not damaged.
4. Inspect NVG exterior surfaces for damage and loose parts or screws.
5. Check that the daylight covers are properly seated and secure.
6. Inspect function switch for completeness and security (ensure in the OFF position).
7. Check that the function switch can be moved to all three positions. Must pull the switch out before
setting to ON-V or IR.
8. Check the battery cap and compartment are complete and free of corrosion.
9. Inspect NVG mounting recess for damage.
10. Check the diopter focus ring to ensure it rotates freely in both directions.
11. Inspect eyecup for damage and perforations and ensure it rotates freely.
Inspect the Sacricial Windows:
1. Inspect lenses for cracks, scratches or chips.
2. Inspect the sacricial window’s threads for damage.
3. Check that the sacricial window’s seal is in place; properly lubricate with DC-4 grease.
Photonis Defense, Inc.
1000 New Holland Avenue
Lancaster, PA 17601
PD-PRO-M-QSG Rev: 48/20
PD-PRO-16M

Operating Instructions
WARNING:
Your NVGs are a precision electro-optical instrument; handle them with care.
Do not remove the daylight covers from the objective lenses at any time until you are ready to
use them in a dark and/or nighttime environment and especially do not remove in bright sunlight.
Damage to the image intensier tube may result from exposure to sunlight and will invalidate your
warranty. The Bright Spot Protection capability built into your PD-PRO is designed for bright lights at
night such as headlights or streetlights and will not suciently protect the system from the intense
rays of the sun. Do not touch or scratch the external lens surfaces. Clean NVGs and dry thoroughly
and clean lenses with lens paper prior to storage. For detailed instructions see the User’s Manual
by using the QR code provided on the back page of this guide.
Warning:
1. Internal components within the image intensier tube contain toxic materials.
2. If the image intensier tube is damaged or broken, avoid inhalation or ingestion of the phosphor
screen material, and avoid contact with open wounds.
3. If the toxic material comes in contact with your skin, wash the aected area with soap and water immediately.
4. If any material is swallowed, drink large quantities of water, induce vomiting and seek medical
assistance as soon as possible.
Fit to Helmet/Harness Mount:
1. Slide the NVG mount onto the helmet/harness attachment until it rmly seats.
2. Fit counterbalance weights if required.
3. Attach the NVG dovetail adapter (#5) to the swivel mechanism mate (audible “click” will sound).
4. Move NVG until eyecup touches the face in front of the eye and adjust the mount for eye separation distance.
5. See the User’s Manual for details about the NVG mount and its component parts.
Operation Check:
1. Install a single battery in the battery compartment (#1).
2. The function switch has four (4) positions: (1) OFF; (2) ON; (3) IR; (4) IR Continuous.
3. Check the function switch to ensure it is in the OFF position (1) and the daylight covers are in place
(Never remove the daylight covers except for low-light level use).
4. Switch the function switch (#2) to the ON position 2; ensure the NVG is operating by looking through
the diopters to see an image of the surrounding environment.
5. Switch the function switch to IR position 4 (you must pull the switch out before setting) and check
that the red LED is visible on the NVG screen.
6. Return the function switch to the OFF position. The system is now operational and is ready to be
adjusted for visual acuity to suit the individual user – see optical adjustments below.
Optical Adjustments:
1. Your PD-PRO-16M monocular has two optical adjustments to rene the clarity of system’s image.
The diopter (#3) is adjustable from -2 to +6 and can be set for a user’s individual eyesight
requirements. Set both channels to “0” and adjust toward the plus sign“+” to increase the strength
or toward the minus sign “-“ to decrease the strength.
2. Once the diopter has been adjusted the Objective Lenses/Range adjustment (#4) can be focused
by twisting them clockwise and counterclockwise to ne tune the image.
Helmet/NVG Function Check:
1. With the NVG attached to the mount and in the operational position in front of the eyes turn the
Function Switch to the ON position with the daylight covers in place.
2. Rotate the swivel mechanism into the up position and ensure the NVG switches OFF and then to the
down position to ensure it turns ON.
Operating in Adverse Conditions
Operating in Dusty/Sandy Environment:
1. Sand and dust can pit/scratch the optical elements and damage the mechanical components if
precautions are not taken.
2. Ensure the sacricial windows (#4) protecting the objectives are in place.
3. Avoid pointing the device into the wind unless necessary.
4. Keep the carrying case closed.
5. Ensure the NVG and case are cleaned aer use.
Operating in Wet/Humid Environment:
Warning: Magnesium version can be damaged by salt water. Clean you google thoroughly aer
exposure to salt water.
1. PD-PRO-16M standard variant is water resistant to 10-meters (33-feet) but is not intended for use in
diving operations.
2. Wet/Humid conditions can cause corrosion and deterioration of the NVG without precautions.
3. Ensure the sacricial windows are in place.
4. Keep the carrying case closed.
5. Dry the NVG, mount, and accessories aer exposure prior to storage.
Warning: Do not store NVG in a wet carrying case or storage case as severe damage may result.
Dovetail
5
Diopter
Objective/ Range
Adjustment
4
Function Switch
2
Battery
1
3