Phyhome FHL104C User manual

www.phyhome.com FHL104C User Manual
1
FHL104C
EPON OLT
User Manual

www.phyhome.com FHL104C User Manual
2
Preface
Related Documentation
Manual Name
Explained
FHL104C
Command Line
Reference
Introduced FHL104C OLT entry devices, systems and equipment,
VLAN, port, port isolation, OLT, ONU, RSTP, Link-Aggregation, mirror,
the MAC address table, QoS, ACL, IGMP, performance, alarm and
pipe network module command.
About this Document
FHL104C EPON OLT User Manual mainly introduces the product description,
positioning, installation, operation, specific functional characteristics and configuration
method, product use matters needing attention in the process of etc.. It suits for
product technical support personnel and people who use the product . Above the
product operation, if you have any questions, please read this manual carefully.

www.phyhome.com FHL104C User Manual
3
Conventions
The following symbol format and keyboard combination may be found in this
document, they are defined as follows:
Format Conventions
Format
Meaning
Bold
Command key words Remain unchanged in the command have to
input completely
Italic
Parameters of the command Replace this part of the command by the
actual values
[ ]
The element located in[ ] means this part is optional
(x | y | ... )
Means that one of the element must be selected in this part
[x|y|…]
Means that it’s a option to select one of this part
<x-y>
Means that the value must be inputted between x and y
$
Indicates the note annotation after this symbol
Key Combination Conventions
Format
Meaning
<words>
Means the name of a key, for example <Enter> <Tab> <Backspace>
<a> <?> indicates the key of Enter, Tab, Backspace, lowercase letters
<KEY1+key
2>
Means the key combination. pressing the keys meanwhile. For
example <Ctrl+Alt+A> means pressing “Ctrl” “Alt” “A” These three
key meanwhile
<KEY1
key2>
Means press the first key Release Then press the second key For
example <Alt F> means press <Alt> KEY firstly, Released, and then
press <F> KEY.

www.phyhome.com FHL104C User Manual
4
Symbol Conventions
The following symbols may be found in this document. They are defined as follows
Caution, Note: Indicates a potentially hazardous situation, which if not
avoided, may cause equipment damage, data loss, performance degradation, or
unexpected results.
Warning: The notes followed the sign need to be given extra attention,
improper operation may cause damage to the body.
Instructions: Provides additional information to emphasize or supplement
important points of the main text.
Noun convention
OLT Here means FHL104C System,including switches and other devices connected
on the link port, the main exchange processing module.
PON Here means PON Protocol Processing module and PON port.
Tips
The command line input for the system need to be distinguished from the size of the
write.

www.phyhome.com FHL104C User Manual
5
Abbreviations
ACL
Access Control List
CDR
Call Detail Record
CVLAN
Customer VLAN
DA
Destination Address
DBA
Dynamic Bandwidth Allocation
EPON
Ethernet Passive Optical Network
FEC
Forward Error Correction
IGMP
Internet Group Management Protocol
LLID
Logical Link Identifier
LPU
Line Process Unit
MAC
Medium Access Control
OLT
Optical Line Terminal
ONU
Optical Network Unit
QoS
Quality of Service
RSTP
Rapid Spanning Tree Protocol
SA
Source Address
SCU
Switch Control Unit
SLA
Service Level Agreement
SNI
Service Network Interface
SNMP
Simple Network Management Protocol
RTT
Round Trip Time
UNI
User Network Interface
VLAN
Virtual Local Area Network
VoIP
Voice over IP
C&M
Classification&Marking

www.phyhome.com FHL104C User Manual
6
Contents
Preface .................................................................................................................................................. 2
Related Documentation............................................................................................................... 2
About this Document.................................................................................................................... 2
Conventions .................................................................................................................................. 3
Abbreviations ................................................................................................................................ 5
1. Description ...................................................................................................................................... 9
1.1Product description................................................................................................................. 9
1.1.1 Product positioning..................................................................................................... 9
1.1.2 Product features ......................................................................................................... 9
1.1.3 Structure features ..................................................................................................... 10
1.1.4 Index parameter........................................................................................................ 11
1.1.5 Typical networking.................................................................................................... 13
1.2 functiona description ........................................................................................................... 16
1.2.1 GEPON access function.......................................................................................... 16
1.2.2 Data service and forwarding ................................................................................... 17
1.2.3 Management and maintenance.............................................................................. 18
2. Installation and landing.............................................................................................................. 19
2.1 Security issues ..................................................................................................................... 19
2.2 Login OLT.............................................................................................................................. 19
2.2.1 After the console port connected to the OLT device ........................................... 19
2.2.2 Local login via Telnet................................................................................................ 20
2.2.3 Remote login via Telnet ........................................................................................... 20
2.2.4 Management of OLT through network management software .......................... 21
3.Command line interface and view ............................................................................................ 21
3.1 Command line interface...................................................................................................... 21
3.2 Command line hierarchy and command line view .......................................................... 21
3.3 Command line view ............................................................................................................. 22
3.4 Command line feature......................................................................................................... 23
3.4.1 Command line help .................................................................................................. 23
3.4.2 Command line history command............................................................................ 25
3.4.3 Command line error message ................................................................................ 25
3.4.4 Command line editing features............................................................................... 26
4.PON service description and configuration .......................................................................... 27
4.1 PON service Introduction.................................................................................................... 27
4.2 PON configuration ............................................................................................................... 28
4.2.1 Global parameter configuration .............................................................................. 28
4.2.2 service template configuration................................................................................ 29
4.2.3 VLAN Configuration ................................................................................................. 30
4.2.4 Addition and removal of ONT ................................................................................. 30
4.2.5 ONT binding template .............................................................................................. 31
4.2.6 ETH ONT port configuration ................................................................................... 31

www.phyhome.com FHL104C User Manual
7
4.2.7 ONT remote restart .................................................................................................. 32
4.2.8 ONT multicast configuration.................................................................................... 32
4.2.9 Encryption and FEC switches................................................................................. 32
5.QINQ service description and configuration......................................................................... 33
5.1QinQ service Introduction .................................................................................................... 33
5.2QinQ service configuration .................................................................................................. 33
6. Multicast service introduction and configuration ............................................................... 35
6.1 Multicast service introduction............................................................................................. 35
6.2 Multicast Configuration ....................................................................................................... 36
6.2.1 Multicast VLAN configuration ................................................................................. 36
6.2.2 Multicast mode.......................................................................................................... 36
6.2.3 Multicast upstream port ........................................................................................... 36
6.2.4 Multicast global parameter configuration .............................................................. 36
7. Upstream port configuration .................................................................................................... 37
7.1 Upstream port mode............................................................................................................ 37
7.2 The addition and removal of VLAN ................................................................................... 37
8.OLT storm suppression............................................................................................................... 38
8.1 Multicast suppression.......................................................................................................... 38
8.2 Unknown unicast suppression ........................................................................................... 39
8.3 Broadcast suppression ....................................................................................................... 39
9. ONT remote batch upgrade....................................................................................................... 39
9.1 ONT remote batch upgrade ............................................................................................... 39
9.2 ONT distal batch upgrade configuration........................................................................... 40
9.2.1 Upgrade preparation ................................................................................................ 40
9.2.2 ONT program loading .............................................................................................. 41
9.2.3 View bulk upgrade status ........................................................................................ 42
10. Introduction and configuration of PON port protection .................................................. 42
10.1 PON port protection .......................................................................................................... 42
10.2 PON port protection configuration................................................................................... 42
11. RSTP loop detection and configuration............................................................................... 42
11.1 RSTP loop detection.......................................................................................................... 42
11.2 RSTP loop detection configuration.................................................................................. 42
12. Alarm and statistics ............................................................................................................... 43
12.1 Alarm configuration and query......................................................................................... 43
12.2 Statistical query.................................................................................................................. 43
13. user management...................................................................................................................... 44

www.phyhome.com FHL104C User Manual
8
13.1 User add ............................................................................................................................. 44
13.2 User query .......................................................................................................................... 44
13.3 User delete ......................................................................................................................... 44
14. System upgrade and backup.................................................................................................. 44
14.1 Introduction to system upgrade ....................................................................................... 44
14.2 System upgrade................................................................................................................. 45
14.2.1 Environmental construction .................................................................................. 45
14.2.2 Software upgrade ................................................................................................... 46
14.3 Configuration file backup and load ................................................................................. 47
14.3.1 Configuration file backup....................................................................................... 47
14.3.2 Load profile.............................................................................................................. 48
14.3.3 Saving configuration .............................................................................................. 48
15.SNMP configuration ................................................................................................................... 49

www.phyhome.com FHL104C User Manual
9
1.Description
1.1Product description
FHL104C is Shenzhen PHYHOME Electronics Co., Ltd. launched a cassette
GEPON OLT Bureau end device. The device has the advantages of small volume,
light weight, convenient installation and simple maintenance, good compatibility,
service without configuration, plug and play with.FHL104C provides four GEPON
port and four Cu / light combo uplink port, with a total access to 256
ONU.FHL104C follow IEEE 802.3 standards, by reference to the requirements to
achieve the China Telecom EPON Technology and support 1GEPON access
business, and Shenzhen City PHYHOME Electronics Co., Ltd. of FHR series of
ONU With the use of the ONU with the third party.
1.1.1 Product positioning
Product positioning is a small, easy to use, cost-effective EPON OLT equipment
at office end for in high-rise buildings, small communities , low density residential
areas, companies, shopping malls, hotels, office buildings and other small
construction of FTTH. It can also be used to monitor, intercom and other industry
applications.
1.1.2 Product features
19 inch standard width, 1U height
The installation is simple and flexible, and don’t need to configure.
Provide 4 GEPON port access
Maximum 256 ONU access (1:64)
The maximum 4 COMBO Gigabit uplink ports business

www.phyhome.com FHL104C User Manual
10
Comply with 802.3 ah specification
Fully compatible with CTC GEPON specification
Support 1:64 optical branching ratio (10km transmission distance)
Maximum access distance 20Km (1:32)
Supports three layers of Stir (CTC SPEC ).
Support FEC (which can improve the transmission distance and branching
ratio)
Supports arbitrary PON 1:1 protection (TBD)
Support ONU out of power, broken fiber alarm
Supports RSTP and loop back detection of ONU port
Support ONU software exception upgrade, batch upgrade
Supports ONU data interoperability with a PON port
Support physical isolation of GEPON
Support on uplink port physical isolation
Supported physical Port isolation of ONU
Supports 802.1Q VLAN mode
Support for VLAN transmission, conversion mode
Supports QinQ VLAN mode
Supports all kinds of multicast mode (Snooping/Proxy/CTC)
Support end-to-end QoS service quality assurance configuration
1.1.3 Structure features
1U standard case, the size of the 440mm (W) 44mm x (H) x 170 (D)
FHL104C Front Panel View Figure 2-2
The components and functions of the front panel are described as follows:
(1) RST: Restart button
(2) CONSOLE: serial port, interface to meet the RS232 Standard Specification for
local management
(3) MGMT: a device with an external management network interface to meet the
100BASE-TX specification for use with a higher level management Equipment
connection
(4)PWR power indicator. When bureau terminal power on, this lantern lits
(5) ACT: equipment running indicator
(6) ALM: emergency warning light
(7) PON1-PON4:4 GEPON interface
(8)GE1-GE4:10/100/1000BASE-TX adaptive Ethernet electrical interface,

www.phyhome.com FHL104C User Manual
11
providing the service.Access can automatically adapt to the direct network cable
and cross network cable.
(9) SFP1-SFP4:1000BASE-LX/SX Ethernet optical interface, supports 1.25Gbps
single mode and multi-mode SFP optical module.
LED
State
Explain
System state
Power
(red)
on
normal operation condition
off
There is no normal operation of the power system
and the power system
ACT
(green)
Twinkle
4Hz frequency: system start state
1Hz frequency: normal working condition
Light or off
System is not working normal
Port state
Link/Act
(green)
on
A stable connection is established between the port
and the connected device.
off
No connection or connection to the port is not
normal
Twinkle
Ongoing data collection / development
1.1.4 Index parameter
Table 5-1 device function and index parameter list
item
Description
chassis
structure
size
Size
440mm (W) x 44mm (H) x 170
(D)
weight
1000g
body frame
19” 1U
AC power
supply
Input
90V TO 264V AC
Power
50W
Surge current
<10A TBD
fuse
2A TBD
redundance
Not supported
Isolation impedance
> 50M ohm
earthing resistance
< 5 ohm
environme
nt
temperature
0 to to 40 degree C (long term)
-5 to 50 degree C (2 hours /
day)
humidity
10 to 90% (no condensation)
Storage temperature
-20 to 70ºC
Storage humidity
10 to 90% (no condensation)

www.phyhome.com FHL104C User Manual
12
item
Description
atmos
86 to 106 kpa
Dust particle size
Diameter>5μm, <3*104pcs/m3
Refrigerati
on
Fan
Left fixed 2 fans, right into the
wind, the left side of the wind
Heat dissipation
noise
Electromagnetic compatibility
requirements
GB 9254-1998 Class A
GB/T 17618-1999
Surge protection requirements
YD/T 1082-2000
Panel
interface
Network
managem
entI/F
Port number
1
junctor
RJ-45
protocol
100BASE-TX/10BASE-T
MDI/MDI-X
Auto
Duplex
Full/Half
Auto
CLI I/F
junctor
RJ45(CSICO)
Other I/F
LED
Please refer to "LED display
specifications"
Uplink I/F
Port number
4 combo
junctor
4 RJ45
junctor
4 SFP
protocol
10/100/1000BASE-T(RJ45)
1000BASE-X (SFP)
MDI/MDI-X
Auto or Manual
Duplex
Full Duplex or Auto
reset
RST(Switch)
Reset the whole system by the
reset button
PON I/F
Port number
4
Trunk fiber protection
port
0
junctor
SFP socket, SC connector
protocol
1000BASE-PX20
IEEE802.3-2005
DDM with RSSI
Compliant with CTC2.1
emission wavelength
1480 to 1500nm
Luminous power
+2.0 to +7dBm
RMS
≤ 0.44nm
extinction ratio
≥9dB
Receiving wavelength
@BER<1×10-12
1260 to 1360nm

www.phyhome.com FHL104C User Manual
13
item
Description
Received optical
power
@BER<1×10-12
-28 to –6dBm
Other I/F
LED
Please refer to "LED display
specifications"
1.1.5 Typical networking
Typical multi service access network:
High-rise buildings, the number of single building users around 200:
Low density cell:
Radio and television network application EPON+LAN:

www.phyhome.com FHL104C User Manual
14
Radio and television EPON+ EOC
Safe city

www.phyhome.com FHL104C User Manual
15
Village Project
Smart home

www.phyhome.com FHL104C User Manual
16
1.2 functional description
1.2.1GEPON access function
EPON standard
Fully comply with IEEE802.3ah standards, fully compatible with China Telecom
EPON equipment technical requirements V3.0.
Maximum spectral ratio
1: 64.
Bandwidth setting
Through the SLA setting, the bandwidth of the ONU can be configured (which can
be configured with a minimum guaranteed bandwidth and maximum effort
bandwidth).
ONU management
You can add, authorize, and bind PON at the ONU port to display a list of
authorized and unauthorized ONU.Remote management through ONU OLT and

www.phyhome.com FHL104C User Manual
17
its port (port isolation and port loop back detection, etc.).
ONU isolation
By default, the ONU is physically isolated.
After the P2P mode is turned on, the ONU can communicate with each other in
the same PON port.
ONU classification function (Classification&Marking)
You can perform simple traffic classification on the ONU (based VLAN).
security
Supports three layers of Stir (SPEC CTC).
Supports MAC address number limit, supports MAC address filtering.
Supports full protection of PON port.
1.2.2 Data service and forwarding
VLAN function
OLT and ONU support port based VLAN, VLAN ID range: 1~4094, where 1 is
reserved for VLAN ID , OLT VLAN ID number is 4094.
Support VLAN 802.1q mode, support VLAN through the transfer, conversion
mode, support QinQ VLAN mode.
MAC
OLT supports the exchange of MAC addresses, which supports the dynamic
learning of the MAC address. MAC's OLT address aging time can be configured.
Port isolation
Support physical isolation link port, support GEPON port physical isolation.
Dynamic bandwidth allocation (DBA)
OLT support dynamic bandwidth allocation mechanism, through to the LLID
assigned SLA to implement bandwidth allocation, a minimum bandwidth allocation
particles of 1MB / s, each LLID configuration can be guaranteed bandwidth, to

www.phyhome.com FHL104C User Manual
18
bandwidth and priority three parameters. An LLID of the same priority through the
historical traffic statistics to ensure that service fairness and the QoS of the
network through the guaranteed bandwidth to achieve.
Priority control (QOS)
The device supports IEEE802.lp agreement marks priorities to achieve the priority
of Ethernet control support end to end QoS configuration.
Storm suppression
Support for broadcast storm suppression.
Multicast function
Support IGMP snooping, the use of SCB way to achieve multicast, each ONU
supports 32 multicast groups, OLT supports 1024 multicast groups.
OLT supports PROXY, and can be dynamically added, IGMP Proxy is able to
intercept redundant report IGMP packets for the router, and can take the initiative
to IGMP query group.
Support CTC.
1.2.3 Management and maintenance
Support console port command line management, support the maintenance
of network telnet management, support on the export of Telnet in
management
Support SNMP network management
Remote upgrade
Supports remote online upgrade of OLT devices.
Support ONU remote online upgrade feature, support ONU software bulk upgrade,
automatic upgrade.
Configuration save recovery
You can save the data on the device configuration, and resume after the switch or
restart.
The backup and load of Configuration files

www.phyhome.com FHL104C User Manual
19
The OLT configuration can be backed up by the document, and then is loaded
into it after edited.
Performance statistics
Support for the uplink of statistics, PON Port Statistics, ONT statistics, ONT
ETHport statistics query.
2 Installation and landing
2.1 Security issues
warning:
When equipment installation, you must first grounding; when remove of
equipment, and finally to remove ground. Equipment should be permanent
connect to protection ground. Prior to operating equipment, should check the
equipment of the electrical connections, to ensure that equipment has reliable
grounding.
Do not block the vents when installing, prevent the operation process of poor
heat dissipation leads to failure.
Equipment operation note:
It is forbidden to operate the equipment and cable in the thunderstorm
weather.
Naked eye are forbidden to export the optical fiber to prevent the laser beam
from burning the eyes.
2.2 Login OLT
2.2.1 Thought the console port connected to the OLT
device to Log in equipment
With serial port interrupt the host and OLT through the serial port of the DB9-RJ45
connection, new serial connection, serial terminal parameters are set to: baud
rate 9600 , data bits 8 bits, no parity , stop bit is 1, without the flow control .
Connected to equipment, terminal will be as output:
*************************************************************
* *
* PHYHOME Software Platform (version 1.11) *
* *
* Copyright 2010-2015 FH-NET OPTOELECTONIC LTD. *
* *
*All rights reserved. *
* *

www.phyhome.com FHL104C User Manual
20
*************************************************************
login:admin
Password:*****
Device default user name and password is :admin, admin.
After you enter the password, the terminal block is shown as follows. The user
can begin to configure the FHL104C.
Host>
2.2.2 Local login via Telnet
The FHL104C management network (MGT) and PC is connected with
management using a crossover cable , PC configuration static IP 192.168.0. X
subnet, subnet mask 255.255.255.0.
Then start the telnet client on PC, connect to OLT.
The OLT Management net IP: 192.168.0.18.After telnet connection is successful,
enter the default user name and password :admin/admin can be connected to
OLT.
2.2.3 Remote login via Telnet
FHL104C support with the management of the channel, you can let the host to
manage through the OLT upstream port .
The OLT device is equipped with no IP, which needs to be manually configured
within the IP.
After using the serial port or MGT port to land OLT, use the following command to
configure the IP:
Host (config) # manage-vlan 100
Host (config) # inband ip address 192.168.1.18 255.255.255.0 VLAN 100
Host (config) # interface ethernet 1/2 - --uplink port management
Host (config-ethernet-1/2) #join-vlan 100 tag
Then through the remote host, telnet to the OLT management IP 192.168.1.18.
Note: If you do not configure the management VLAN, the system defaults to