Pidion BIP-1300 Series User manual

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 1 >
BIP-1300 Series
User Manual (for Windows
Mobile)
BluebirdSoft Inc.
558-5, Shinsa-Dong, Kangnam-Gu, Seoul, Korea
A/S Center: 1588-1380
Website : www.mypidion.com
- Please read “Warning and Caution” before use.
Bluebird Soft Inc.

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 2 >
WARNING AND CAUTION
• Use only the approved accessories and components
provided by Bluebird Soft Inc. to insure user safety.
• Never reconstruct, disassemble, or repair the
product arbitrarily. Always contact a service center
authorized by Bluebird Soft Inc.
• If PDA or battery is wet, please do not attempt to
dry it by heater or microwave. Failure to do so may
cause explosion, deformation, or malfunction. (Wet
PDA or battery changes the label color. Malfunction
with colored label can not be serviced under
warranty service.
• Please avoid the use of device in explosives area.
• Please do not use the device in restricted area such as in
flight and hospital Operation while driving is also dangerous.
• Do not use the PDA in high humidity and
temperature. High temperature and humidity may
cause PDA malfunction and shorten battery life.
• Avoid the shock and vibration. Unplug the power
cord if the device in not in use and keep it in the
safe place.
• Do not operate the PDA phone near any credit card,
phone card, account book, ticket in order to avoid
magnetic interference. It may cause damage to
data in the PDA phone.
• Please avoid contact of metal objects such as necklace and
coins with battery connection.
• Please use the authorized battery and adapter only. Do not
use them for other purposes. Unauthorized battery and
adapter use may shorten the device life or cause explosion.
• Please avoid barcode laser contact with eyes.
• PDA phone data must be stored separately so that
they are kept safe while the PDA being repaired or
upgraded.

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 3 >
Ⅰ. Get to Know BIP-1300
1. Terminal and Accessories
2. Component Names
3. Buttons
4. Function Keys
5. Attach/Detach Battery
6. Charge Battery
7. Battery
8. Specifications
Ⅱ. Get familiar with the basic functions
1. Power On/Off
2. Stylus Pen
3. Get Started
4. Phone Calls (Send/Receive)
5. Character Input
6. SD memory card
7. Initialize with Soft Reset
8. Format Memory with Hard Reset
Ⅲ. Functions
1. Barcode Scanner
2. IrDA
3. Bluetooth
4. Wireless LAN
Ⅳ. ActiveSync
1. Install ActiveSync
2. Download Files
Ⅴ. APPENDIX
1. Frequently Asked Questions
2. Website and Authorized Service Station
3. Miscellaneous
CONTENTS

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 4 >
Ⅰ. Get to know BIP-1300
1. Terminal and Accessories
Thank you for purchasing PIDION. Please check if all components are included.
※ Picture or Image on the manual could be different from actual model.
Please contact the regional manager for accessories or additional components.
(Belt clip is not provided)
[Terminal] [Cradle] [Battery] [Stylus Pen]
[USB Cable]
[Power Cable] [AC Adapter] [Stylus Tether]

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 5 >
2. Component Names
Please see below for each component.
[Front]
Printer
Printing Outlet
Magnetic Card Reader
CDMA light
Charge light
LCD
Key Pad
Data Synch or
Charging connection
Cradle connection
[Bottom]

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 6 >
[Right]
Speaker
Printing paper door
Ear Jack
IC Card Reader
Barcode or Camera button
Reset
SD Slot
IrDA
[Left]
Printing paper check
Window
USB Host
Barcode button

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 7 >
[Back]
Barcode Scanner
Camera, Flash
Hand Strap
Battery door
[Back]

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 8 >
3. Buttons
Phone Activate phone program and connect phone.
Clear Delete the character from right side to left.
Alpha Change the character mode to numeral, upper case, lower case or symbols.
Hang up
Turn on/off the PDA power.
Terminate the program in use.
Power Button
Turn on/off the PDA power.
LCD Back Light on/off could be carried out when push the button longer than
3 second.
Move the menu up or left side.
Direction Key
Move the menu down or right side.
Function Key Execute an event while holding function key and other numeric key.
Front
Buttons
Enter key Input symbol or letter and execute.
Side
Button
Barcode
or Camera Button
Depending on user setting, right or left side button can be used for barcode
scanner or camera.

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 9 >
4. Function Keys
+ Opens “Start Program.” (Same as the “Start” on the Window of PC.)
+ Starts the Key Board Input Method.
+ Starts the Symbol Input Method.
+ Gradually lights up the LCD.
+ Starts Refresh Function. (Same as F5 of PC.)
+ Gradually dim the LCD.
+ Page Down.
+ Changes to an Active Program. (Same as “Alt+Tab” of PC.)
+ Page Up.
+ Starts the Stylus Pen Adjustment Program.
+ Scroll Up.
+ Scroll Down.
Combination of
Function Keys
and
Number/Symbol
Keys
+
The LCD Screen rotates in 4 Steps. It changes sequentially depending on the
number of pressing the buttons.

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 10 >
5. Attach and Detach Battery
[Batter Attached]
▪ Push the lower part of battery after adjusting the
battery to the battery slot
▪ Place the battery door from upside.
[Battery Detached]
▪ Detach the battery door with pushing the above button
▪ Detach the battery with lifting the battery upside
※ Power must be turned off before removing the battery.
Sudden electricity cut may cause the trouble.
Sudden power off may be a cause of failure and
may lose data.

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 11 >
6. Charge the battery
[Charge with the cradle]
▪ As shown in the left, connect the adapter to the right side of
the cradle on the back.
▪ When you insert PDA to cradle, push it untill clicking sound
comes out.
▪ For extra battery charge, insert extra battery to extra battery
place on cradle until you hear the clicking sound.
※ The product may not have been charged at the time of
purchase.
It is recommended to charge the battery for more than 48 hours
prior to the first use of device.
※ If the device has not been used for a long time, please
charge the battery for more than 48 hours before use.
※ When charging both terminal and extra battery on a cradle,
Terminal will be charged first before charging the extra battery.

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 12 >
[Charge with adapter]
▪ 24 pin to DC jack converter PDA will be required to be
connected to adapter.
※ 24pin to DC jack converter can be purchased separately.
▪ As shown in the left, please make sure that converter’s
connector is in the right direction. Push the both side buttons
and insert it into the terminal’s connecting port
▪ After charging, please remove the connector from the
terminal.
※ Use the adapter which is provided by Bluebird soft Inc. for
safety
※ Use of 9V 3A adapter for any other low-voltage device than
Bluebird’s device may cause malfunction, explosion.
24pin to DC jack converter

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 13 >
7. Battery
▪ When PDA and extra battery are in the cradle at the same time, PDA will be charged at first, and then extra battery start to charge.
Therefore, extra battery will be charged longer when PDA and extra battery are in the cradle at the same time
▪ LED during charging
※ When battery is placed in cradle improperly, orange LED blinks on the cradle. Please re-
insert battery again.
※ Battery is consumable and its life will get shorter. When battery working time is shorter than
new battery, battery needs to replace new one. (Battery warranty is 6 month after purchase)
※ Battery life will vary depending on the working environment such as carrier’s service,
temperature, and battery using time. Battery working time may get shorter when magnetic
card reader, printer, IC card reader, internet and etc are in use.
Charging Completely Charged
Charge LED
Classification PDA Cradle PDA Cradle
PDA Phone Orange Green
PDA in cradle Orange Green
Battery in cradle Orange Green
PDA & battery in cradle (charge PDA ) Orange Orange Green Green
PDA & battery in cradle (charge battery) Green Orange Green Green
Charge indicator
Cradle charge indicator

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 14 >
8. Specifications
▪
CPU Intel PXA270 520MHz
OS Windows Mobile 5.0, Win CE 5.0
Memory RAM: 128MB, ROM: 128MB
Display 3.5” 260,000 Color 240x320pixel
Communication CDMA 1X or EVDO & WLAN(802.11b/g), GSM & WLAN(802.11b/g)
Interface IrDA 1.2, Bluetooth Class 2
USB Host (mini type USB) / Client
RS-232C, SD slot (Support SDIO)
SIM Card Slot 1, SAM Card Slot 3
MSR ISO7810(Track1,2,3) card reader / Bi-direction
IC Card Reader ISO7816, EMV2000 Level 1, 2 certified Smart Card Reader, 3 SAMs
Barcode Engine 1D(linear Image type or Laser type), 2D(only PDF 417, linear Image type)
Printer 2” Thermal Printer
Camera 2.0M Pixel, Flash
Input Touch screen, Function Keys, Numeric Button
Audio Speaker (Mono), Ear Jack (Mono, 3극)
Antenna Internal (CDMA, GSM, BlueTooth, WLAN)
Battery 7.4V 3,700mAh Li-ion Battery (1,850mAh x 2cell)
Dimension Max. 87(min.74) x 218 x 54.5(min.29) mm, 510g
Environment 1.2m concrete drop

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 15 >
Communication Specification
Index Specification
CDMA 1x Frequency: Sending (824.64MHz ~ 848.37MHz), Receiving(869.64MHz ~ 893.37MHz)
Antenna Power: 270mW or less
Shift Keying: G7W
Used the Certified Module (BCM-865)
CDMA Evdo CDMA 1xEV-DO(IS-856)
Forward: up to 2.4Mbps, Reverse: 153.6Kbps
Dual Band :
- Cellular : Sending (824.82MHz ~ 848.19MHz), Receiving(869.82MHz ~ 893.19MHz)
- USPCS : Sending (1850MHz ~ 1910MHz), Receiving(1930MHz ~ 1990MHz)
Antenna Power: 250mW or less
Shift Keying: G7W
Used the Certified Module (CDE-650G)
WLAN Frequency: 2,412MHz ~ 2,472MHz
Number of Channels: 13
Antenna Power: 10mW or less
Shift Keying: G1D, D2D
Used the Certified Module (SWL-2460C)
Bluetooth Frequency: 2,402MHz ~ 2,480MHz
Number of Channels: 79
Antenna Power: 0.01mW or less
Shift Keying: F1D

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 16 >
Ⅱ. Get familiar with the basic functions
1. Power on/Off
▪ Push the power button.
▪ While power is on, push the power button longer (About 3 Sec.) Then Back light will be
turned off. .
▪ While Back Light is turn off, push the power button longer (About 3 Sec.) Then Back light
is turned on.
▪ When Power is on or Back light is on, power is turned off if the power button is pushed.
2. Stylus Pen
▪ Using stylus to select, execute and move the items in the screen.
▪ Tapping Stylus: Tap the icon in the screen for once by using stylus to select or execute the
item, like clicking the mouse left button.
▪ Dragging Stylus: Using dragging stylus to select several items, characters and images, like
dragging the mouse.
▪ Tapping and Holding Stylus: In order to view selected item’s function, taping and holding
the stylus in the screen and it shows the pop manual, like using mouse to select the item
and click the right button.
※ Improper use of sharp pen, pin instead of stylus pen may make damage to device window.
Power button

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 17 >
3. Getting Started
[Calibration] [Windows Mobile screen]
▪ Using stylus to select, execute, move the item in screen
▪ Press the stylus to the targeted center target accurately,
and doing the same when the target move to up left, down
left, down right, up right (This is to settle the input value of
stylus in LCD screen.
▪ The following figure is shown after the
initialization wizard finished.
Title Bar
Today
Screen

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 18 >
[Starting Windows Mobile]
▪ Click on the Start Button on the upper left corner of the
title bar and the Start Menu appears.
Start Button
Start Menu
Program
Execution and
Option Setting

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 19 >
4. Phone Calls (Send / Receive)
[Send]
1) Push and make a start the phone program.
2) Enter the phone number.
3) Edit the phone number with .
4) or make you phone call.
• Re-send function: Automatically make a phone call which is the last number you input
5) Connecting.
• Talking time will show up on the screen.
[Receive]
1) With ringing ‘Calling’ sign will be shown on the screen.
2) Push or and it will be connected.
3) Push the disconnect button or button will make you disconnected with line.
4) Push the disconnected button longer, then modem will be off.
※ This mobile handheld device requires ear jack(headset) to make a phone call.
※ Ear jack is an accessory item.

BIP-1300 Copyrightⓒ 2006 Bluebird Soft, Inc. All Rights Reserved. < 20 >
5. Character input
[Keyboard entry]
▪ Available for input character by Keyboard.
▪ Keyboard
① Select the keyboard.
② Type in the character you want to enter
※ Use of “Shift” and “Ctrl” is the same as in PC keyboard.
Language Converter Button