Pillow Talk DUTTON User manual

1.
ASSEMBLY INSTRUCTIONS
DUTTON BEDSIDE TABLE

2.
It is STRONGLY RECOMMENDED that you ANCHOR this product.
Toppling furniture can cause serious injuries and death.
This product has been supplied with an anchor kit. To prevent your furniture tipping forward it is strongly
recommended that you securely attach this product to a wall or other solid surface using appropriate xings.
IMPORTANT
• Regularly check that anchors are securely maintained.
• Do not overload.
• Place heavy objects in the lowest drawers.
• Never let children climb hang on drawers, doors or shelves.
• Stability of tall items may be aected by thick pile carpet or uneven oors.
• Do not put a TV or other heavy objects on top of furniture not intended for use with a TV.
CAUTION
For your safety when attaching the anchor xings, please note the following:
• Check for any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure,
please seek professional Advice from a qualied tradesperson)
• Walls are constructed from dierent materials, for example, masonry (solid brick) or plasterboard lined
cavity walls (hollow). It is important that you use the appropriate wall ttings for your wall type.
• Your local hardware store will have the necessary drills and ttings and can oer advice if needed. If in
doubt, engage the services of a qualied tradesperson to install and anchor this product.
WARNING

3.
CAUTION
Please do not use any power tools in the
assembly of this item. Use of power tools may
cause damage and void manufacture warranty.
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the Pillow Talk store where the goods were purchased.
IMPORTANT NOTE:
• Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
• Remove all wrapping material, including staples & packing straps before you start to assemble.
• DO NOT tighten all screws and bolts until completely assembled.
• Keep all hardware parts out of reach of children.

4.
1
2
2
3
4
3
4

5.
PARTS LIST
(1)
(3)
(2)
(4)
1 x Cabinet
2 x Top stretcher
2 x Leg frame
2 x Bottom stretcher
(A) (D)
(G) (J)
(B) (E)
(H) (K)(I) (L)
(C) (F)
8 x Ø6x35mm 8 x Dowel
1 x Anchor 2 x Handle
5 x Ø4x30mm 1 x Ø4x14mm
1 x Anti-tip Bracket 1 x Glue
8 x Ø4x40mm 1 x Allen Key
2 x Washer 8 x Cover Caps
When unpacking, please be careful not to discard any parts with the packaging.
Before continuing,please make sure you have the following parts:
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging.
Before continuing, please make sure you have all of the following hardware:
(The hardware quantities listed above are required,For proper assembly some extra hardware may have been included.)