Pioneer GM-3500T User manual

----------------------
;Jlltu.
ll
m
BRIDGEABLETWO-CHANNEL POWER AMPLIFIER
AMPLIFICATEUR DE PUISSANCE PONTABLE A DEUX CANAUX
AMPLIFICADOR DE POTENCIA DE DOS CANALES PUENTEABLE
GM-3500T
Owner's
Manual
Mode
d'emploi
Manual
de
instrucciones
:::::s
cc
fA
::::r
.,
...
S»
:::::s
&.(")
!.
fA
m
fA
"C
S»
:::II
0

Section
ID ( Before you start
Thank you for purchasing
this PIONEER product.
To ensure proper use, please read through this
manual before using this product. It is espe-
cially
important that you read and observe
WARNINGs and CAUTIONs in this manual.
Please keep the manual in a safe and accessible
place for future reference.[!]
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
user's right to operate the equipment.
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service
(including warranty conditions) or any
other information. In case the necessary infor-
mation is not available, please contact the
companies listed below:
Please do
not ship your unit to the companies
at the addresses Iisted below for repair without
advance contact.
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
PO. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER
SATISFACTION DEPARTMENT
340 Ferrier Street
Unit 2
Markham, Ontario
L3R 2Z5, Canada
1-877-283-5901
905-479-4411
For warranty information please see the Lim-
ited Warranty sheet included with
this unit.[!]
CD En
Visit our website
Visit us at the following site:
http://www.pioneerelectronics.com
in Canada
http://www.pioneerelectronics.ca
)
1 Register your product. We will keep the details
of your purchase
on file to help you refer to
this information
in the event of an insurance
claim such
as loss or theft.
2 Receive updates
on the latest products and
technologies.
3 Download owner's manuals, order product
catalogues, research new products, and
much
more.[!]
The Safety of Your Ears is in
Your Hands
Get the most out of your equipment by playing
it at a safe
level-a level that lets the sound
come through clearly without annoying blar-
ing
or distortion and, most importantly, with-
out affecting your sensitive hearing. Sound
can be deceiving. Overtime, your hearing
"comfort level" adapts to higher volumes of
sound, so what sounds "normal" can actually
be loud and
harmful to your hearing. Guard
against this by setting your equipment at a
safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
• Set your volume control at a low setting.
• Slowly increase
the sound until you can
hear it comfortably and clearly, without dis-
tortion.
•
Once you have established a comfortable
sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:
• Do not turn up the volume so high that you
can't hear what's around you.
• Use caution
or temporarily discontinue use
in potentially hazardous situations.
• Do
not use headphones while operating a
motorized vehicle;
the use of headphones
may create a
traffic hazard and is illegal in
many areas.[!]

Section
(~B_e_fo_r_e~y~o_u_s_ta_rt _____________________________ )cmJ
Before connecting/
installing the amplifier
AwARNING
• Handling the cord on this product or cords as-
sociated with accessories sold with the pro-
duct may expose
you to chemicals listed on
proposition
65 known to the State of California
and other governmental entities to cause can-
cer and birth defect or other reproductive
harm.
Wash hands afterhandling.
• The use of a special red battery and ground
wire
RD-223, available separately, is recom-
mended. Connect the battery wire directly to
the car battery positive terminal
EB and the
ground wire to the car
body.
• This unit is for vehicles with a 12 V battery and
negative grounding. Before installing in
re-
creational vehicles, trucks or buses, check the
battery voltage.
• Always use a fuse of the rating prescribed.
The use of
an improper fuse could result in
overheating and smoke, damage to the pro-
duct and injury, including burns.
• Check the connections of the power supply
and speakers if the fuse of the separately sold
battery wire or the amplifier fuse blows. Deter-
mine and resolve the cause, then replace the
fuse with and identical equivalent.
•
Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and
over-
heating could result from contact with liquids.
The surfaces of the amplifier and any attached
speakers may also heat up and cause
minor
burns.
•
In the event of any abnormality, the power
supply to the amplifier
is cut off to prevent
equipment malfunction.
If this occurs, switch
the system power off and check the power
supply and speaker connections. If you are un-
able to determine the cause, please contact
your dealer.
• Always disconnect the negative 8 terminal of
the battery beforehand to avoid the risk of
electric shock
or short circuit during installa-
tion.
AcAUTION
• Always keep the volume low enough to hear
outside sounds.
• Extended use of the car stereo while the en-
gine
is at rest or idling may exhaust the bat-
tery.
About the Protection function
The Protection function will operate in the condi-
tions outlined below.
If the Protection function is
turned on, the power indicator will turn off, and
the amplifier will shut down.
•
If the speaker output terminal and speaker
wire
is short-circuited.
• If the temperature inside the amplifiergets too
high.
• If a
DC voltage is applied to the speaker out-
put terminal.
:!r Important (Serial number)
The serial number is located on the bottom of
this unit.
For your own security and convenience,
be sure to record this number on the enclosed
warranty
card.[!]
~~
m
::s
cc
u;·
':S'
En CD

Section
m( Setting the unit
What's what
Front side
Rear side
To adjust the switch, use a flathead screwdri-
ver if needed.
CD LPF (low-pass filter) switch
Switch the settings based on the connected
speaker.
• When the Subwoofer
is connected:
Select ON. This eliminates high range
frequency and outputs low range fre-
quency.
• When the full range speaker
is con-
nected:
Select
OFF. OFF outputs the entire fre-
quency range.
@ GAIN (gain) control
If
output remains low, even when the car
stereo volume
is turned up, turn controls to
lower level. If distortion occurs when the car
stereo volume
is turned up, turn these con-
trols to higher level.
• For use with
an RCA equipped car stereo
(standard output of
500 mV), set to the
NORMAL position. For use with an RCA
equipped Pioneer car stereo, with max.
output of 4 Vor more, adjust
level to
match that of the car stereo output.
• If you hear too much noise when using
the speaker input terminals, turn the
gain control to higher level.
® Power indicator
The power indicator lights up to indicate
power
ON.~
(])En
Setting gain properly
• Protective function included to prevent
malfunction of the unit and/or speakers
due to excessive output, improper use or
improper connection.
• When outputting high volume sound etc.,
this function cuts off the output for a few
seconds as a normal function, but
output
is restored when the volume of the head
unit is turned down.
)
• A cut in sound output may indicate impro-
per setting of the gain control. To ensure
continuous sound output with the head
unit at a high volume, set amplifier gain
control to a
level appropriate for the preout
maximum output level of the head unit, so
that volume can remain unchanged and to
control excess output.
• Despite correct volume and gain settings,
the
unit sound still cuts out periodically. In
such cases, please contact the nearest
authorized Pioneer Service Station.
Gain control of this unit
GAIN
NORMAL~
Preoutlevei:2V~ ~
(Standard: 500 mV)
6.5V 0.2V
Above illustration shows NORMAL gain set-
ting.
Relationship between amplifier gain
and head
unit output power
-• Equal power
Head unit volume steps Head unit volume steps
Amplifier gain
---- ... ~ Amplifier gain
(normal) (maximum)
If amplifier gain is raised improperly, this will
simply increase distortion, with little increase
in power.

Section
(~s_e_tt_in_g __ th_e_u_n_i_t ____________________________ ~)QI
Signal waveform when outputting at
high volume using amplifier gain
control
• •••• Equal power •• •
Amplifier
gain ----- ... ~Amplifier gain
(normal) (maximum)
Signal waveform distorted with high output, if
you raise the gain of the amplifier the power
changes only
slightly.[!]
..
m
:::s
cc
u;·
:::s'
En m

Section
ID(Connecting the units
Connection
diagram
CD Special red battery wire
RD-223 (sold separately)
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifierto the positive((±)) battery
terminal.
® Ground wire (Black)
RD-223 (sold separately)
Connect to metal body or chassis.
® Car stereo with RCA output jacks (sold sepa-
rately)
® External output
® Connecting wire with RCA pin plugs (sold se-
parately)
® Speaker input terminal (use a connector in-
cluded)
Please
see the following section for speaker
connection instructions. Refer to Connections
when using the speaker input wire on page 8.
OJ RCA input jack
® System remote control wire (sold separately)
Connect male terminal of this wire to the
sys-
tem remote control terminal of the car stereo.
mEn
)
The female terminal can be connected to the
auto-antenna relay control terminal.
If the car
stereo lacks a system remote control terminal,
connect the male terminal to the power term-
inal via the ignition switch.
® Speaker output terminals
Please
see the following section for speaker
connection instructions. Refer to Connections
when using the speaker input wire on page 8.
@ Fuse (25 A)
(j]) Fuse (30 A) x 2
@Grommet
@ Rear side
@ Front side[!]
Before connecting the
amplifier
AwARNING
• Secure the wiring with cable clamps or adhe-
sive tape.
To protect the wiring, wrap sections
in contact with metal parts in adhesive tape.
• Never
cut the insulation of the power supply
to feed power to other equipment. Current ca-
pacity of the wire
is limited.
A cAUTION
• Never shorten any wires, the protection circuit
may malfunction.
• Never ground speaker wire directly
or band to-
gether multiple speakers' negative
(8) lead
wires.
• If the system remote control wire of the ampli-
fier
is connected to the power terminal via the
ignition switch
(12 V DC), the amplifier will re-
main on with the ignition whether the car
stereo
is on or off, which may exhaust battery
if the engine
is at rest or idling.
• Install and route the separately sold battery
wire as far
as possible from the speaker wires.
Install and route the separately sold battery
wire, ground wire, speaker wires and the am-
plifier
as far away as possible from the anten-
na, antenna cable and tuner.[!]

Section
(~c_o_n_n_e_c_t_in~g~t_h_e_u_n_i_ts ____________________________ )GII
About bridged mode
Diagram A- Proper
L<I>
Pioneer
Amplifier
4Q Bridged Mode
Diagram B- Improper
2Q Bridged Mode
Speaker impedance is max. 4 n, please carefully
check. Improper connection to the amplifier may
result
in malfunction or personal injury due to
burns from overheating.
For bridged mode for a two-channel amplifier,
with a 4n load, either wire two 8n speakers
in
parallel, Left(±) and Right 8 (Diagram A) or use a
single 4n
speaker. For other amplifiers, please
follow the speaker output connection diagram for
bridging shown
on rear: two 8n speakers in par-
allel for a 4n
load or a single 4n speaker per
channel.
For any further enquiries, contact your local
authorized Pioneer dealer or customer service.(!]
About suitable
specification
of speaker
Ensure speakers conform to the following
standards, otherwise there is a risk of fire,
smoke or damage. Speaker impedance is 2n
to 8n for stereo connection, or 4 n to 8 n for
monaural and other bridge connection.
Subwoofer
Two-channel output Nominal input:
Min. 60W
One-channel output Nominal input:
Min.180W
Other than subwoofer
Two-channel output MAX input:
Min.
120 W
One-channel output MAX input:
Min. 370W
Connecting the speakers
The speaker output mode can be two-channel
(stereo)
or one-channel (mono). Connect the
speaker leads to suit the mode according to
the figures shown below.
1\No-channel output (Stereo)
CD Speaker (Left)
@ Speaker (Right)
One-channel output
+
CD Speaker (Mono)(!]
En CiJ

Section
IJ) (Connecting the units
Connections
when using
the speaker input wire
Connect the car stereo speaker output wires
to the
amplifier using the supplied speaker
input wire.
• Do not connect both the RCA
input and the
speaker
input at the same time.
CD Car Stereo
@ Speaker output
® White/black: Left 8
® White: Left ffi
® Gray/black: Right 8
® Gray: Right ffi
Q) Speaker input connector
To speaker input terminal of this unit.~
Connecting the power
terminal
The use of a special red battery and ground
wire RD-223, available separately,
is recom-
mended. Connect the battery wire directly
to
the car battery positive terminal (!)and the
ground wire to the car body.
AwARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there
is a risk of
overheating, malfunction and injury, including
minor burns.
1 Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
([)En
of the am pi ifier to the positive ((!)) battery
terminal.
CD Positive (ffi) terminal
@ Engine compartment
® Vehicle interior
® Fuse (30 A) x 2
® Insert the 0-ring rubber grommet into the
vehicle
body.
® Drill a 14 mm (1/2 in.) hole into the vehicle
body.
2 Twist the battery wire, ground wire
and
system remote control wire.
Twist
----·
3 Attach lugs to wire ends.
Use pliers, etc., to crimp lugs to wires.
CD Lug (sold separately)
@ Battery wire
® Ground wire
4 Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
)

Section
(~c_o_n_n_e_d_i_n_g_t_h_e_u_n_i_ts
____________________________
)GDI
CD
System remote control terminal
@
Ground terminal
® Power terminal
@
Terminal screws
® Battery wire
® Ground wire
(]) System remote control
wire(!)
Connecting
the
speaker
output
terminals
1
Use
wire
cutters
or
a
utility
knife
to
strip
the
end
of
the
speaker wires
to
ex-
pose
about
10
mm (3/8in.)
of
wire
and
then
twist
the
wire.
Twist
------,P=zi
~
10
mm
(3/8 inch)
2 Attach lugs
to
wire
ends.
Use pliers, etc.,
to
crimp
lugs
to
wires.
CD
Lug
(sold separately)
@
Speaker wire
3 Connect
the
speaker wires
to
the
speaker
output
terminals.
Fix
the
speaker wires securely
with
the
term-
inal screws.
CD
Terminal screws
@
Speaker wires
®
Speaker output terminals(!)
En
CD

Section
m(Installation
Before installing the amplifier
j\wARNING
•
To
ensure proper installation, use the supplied
parts
in
the manner specified. If any parts
other than those supplied
are
used, they may
damage internal parts of the amplifier, or
be-
come loose causing the amplifier to shut
down.
•
Do
not install in:
-Places where it could injure the driver or
passengers if the vehicle stops suddenly.
- Places where it may interfere with the dri-
ver,
such
as
on the floor in front of the d
ri-
ver's seat.
• Install tapping screws
in
such a way that the
screw tip does not touch any wire. This
is
im-
portant to prevent wires from being cut
by
vi-
bration of the
car,
which can result
in
fire.
• Make sure that wires
do
not get caught
in
the
sliding mechanism of the seats or touch the
legs of a person
in
the vehicle
as
short-circuit
may result.
• When drilling to install the amplifier, always
confirm no parts are behind the panel and
protect all cables and important equipment
(e.
g.
fuel/brake lines, wiring) from damage.
j\cAUTION
•
To
ensure proper heat dissipation of the ampli-
fier, ensure the following during installation:
-Allow adequate space above the amplifier
for proper ventilation.
-
Do
not cover the amplifier with a floor mat
or carpet.
• Protection function may activate to protect the
amplifier against overheating due to installa-
tion
in
locations where sufficient heat cannot
be
dissipated, continuous use under high-vo-
lume conditions, etc.
In
such cases, the am-
plifier shuts down until it has cooled to a
certain designated temperature.
• Avoid routing wires through hot areas, such
as
nearthe heater outlet. Heat may damage
the insulation, resulting
in
a short-circuit
through the vehicle
body.
®En
•
The
optimal installation location differs
de-
pending
on
the car model. Secure the ampli-
fier at a sufficiently rigid location.
)
• Firstly make temporary connections and
check to ensure the amplifier and system
op-
erate properly.
• After installing the amplifier, confirm that the
spare tire, jack and tools can
be
easily
re-
moved.~
Example
of
installation on
the
floor
mat
or
chassis
1
Place
the amplifier
in
the desired instal-
lation location.
Insert
the
supplied
tapping
screws
(4
mm
x
18
mm)
into
the
screw holes and push on
the
screws
with
a screwdriver so they make an im-
print
where
the
installation holes are
to
be lo-
cated.
2 Drill2.5 mm (1/8 in.) diameter holes
at
the imprints either on the carpet or directly
on the
chassis.
3 Install the amplifier
with
the
use
of
supplied tapping
screws
(4 mm
x
18 mm).
CD
Tapping-screws
(4
mm x
18
mm)
®
Drill a
2.5
mm
(1/8
in.) diameter hole
®
Floor mat or
chassis~

Appendix
(~A_d_d_i-ti_o_n_a_l-in_f_o-rm
__
a_t-io_n
__________________________
)
Specifications
Power source
................
.
..
.
.........
14.4
V
DC
(1
0.8 V to
15
.1V
allowable)
Grounding system
...................
Negative type
Current consumption
............
15
A (at continuous power,
40)
Average current drawn
.........
4 A
(4
0
for
two channels)
7 A
(4
0 for one channel)
Fuse
................................................
25A
x 1
Dimensions (W x H x
D)
...
289
mm x
62
mm x
219mm
(11-3
/8 in.
X
2-1
/
2in.
X
8-5/8 in.)
Weight ..
...
.
....................................
2.0
kg
(4.4
lbs)
(Leads
for
wiring not in-
cluded)
Maximum power output
.......
400
W (2
00
W x
2)
Continuous power output
...
60
W x 2 (at
14.4
V,
4
Q
20Hz to
20kHz,~
1.0%THO
+N)
185Wx
1
(at14.4V,40
BRIDGE 1
kHz,~
1.0%THO
+N)
85W
x 2 (at 14.4V,
20.
1kHz,~
1.
0%
THD+N)
Load impedance
............
.
.........
40 (20 to 80 allowable)
Frequency response
.....
.
.........
10Hz to 70kHz (
+0
dB,-
3dB)
Signal-to-noise ratio
......
.
........
98
dB (IHF-A network)
Distortion
............
.
.......
.
.....
....
..
.....
0.05%
(1
0 W, 1 kHz)
Low pass filter:
Cut off frequency ....
.......
80
Hz
Cut off slope
.....................
-12
dB/oct
Gain control:
RCA
..........................
....
........
200
mV to 6.5V
Speaker
..............................
0.8
Vto
26
V
Maximum input level I impedance:
RCA
......................................
6.5
V
/22
kO
Speaker
....................
..
........
26
VI
22
kO
CEA2006
Specifications
Power output
.............................
60
W RMS x 2 Channels (at
14.4V
,
40and~1
%THO
+N)
S/N ratio
.......................................
80
dBA (reference: 1W into
40)
Notes
• Specifications and the design are subject to
modifications without notice.
• The average current drawn
is
nearly the maxi-
mum
current drawn
by
this unit when
an
audio signal
is
input. Use this value when
working out total current drawn
by
multiple
power amplifiers.
C!l
En
@

Register yourproduct at
Enregistrez votre produit au
Registre su producto en
http://www.pioneerelectronics.com
See "Visit our website" page
Voir Ia page "Visitez notre site Web "
Consulte
Ia pagina sabre "Visite nuestro sitio Web"
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031,
JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: [phone]
PIONEER EUROPE
NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: [phone]
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: [phone]
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Area Lane, Heatherton, Victoria, 3202 Australia
TEL: [phone]
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit
2, Markham, Ontario L3R 2Z5, Canada
TEL: [phone]
TEL: [phone]
PIONEER ELECTRONICS DE MEXICO, S.A.
de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
C<?I.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: [phone]
$tit 0~-f)}:fii ~LH1 S1
f5~trtJP-J~~Iffii:Jt~g4o75m8tt
~~3 : [phone]
$til=.::t- < w5i) :fii~JN1} SJ
-~ft~~~~~~-iliWB·~~
9tl901-6~
~~3 : [phone]
<KNAZX> <11 COOOOO>
© 2011 PIONEER CORPORATION. All
rights reserved.
© 2011 PIONEER CORPORA"fiON. Tous
droits de reproduction et detraduction
reserves.
Printed in China
lmprime en Chine
<5707000005530>UC

PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUES
DU CANADA, INC.
GARANTIE LIMITEE , , ,
GARANTIE VALIDE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE
GARANTIE
Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc. (POC) garantissentque les produits distribues par PUSA aux Etats-Unis et par POC au Canada qui, apres
avoir ete installes et utilises conformement au manuel
de l'utilisateur inclus avec l'unite, ne fonctionnent pas de fa9on appropriee dans des conditions d'utilisation normales en raison d'un
vice de fabrication, seront repares ou remplaces par une unite de valeur comparable, au choix de PUSAou de POC, sans que vous deviez payer pour les pieces ou les travaux de reparation.
Les unites ou pieces
de rechange fournies en vertu de Ia presente garantie peuvent etre neuves ou remises aneuf, au choix de PUSA ou de POC.
LA PRESENTE GARANTIE LIMITEE S'APPLIQUE AU PROPRIETAIRE INITIAL AINSI QU'A TOUT PROPRIETAIRE SUBSEQUENT DU PRESENT PRODUIT PIONEER PENDANT LA PERIODE DE GARANTIE,
A CONDITION QUE LE PRODUIT AIT ETE ACHETE CHEZ UN DISTRIBUTEUR OU MARCHAND PIONEER AUTORISE AUX ETATS-UNIS OU AU CANADA. VOUS DEVREZ FOURNIR UN RELEVE DE CAISSE
OU UNE AUTRE PREUVE D'ACHAT VALIDE INDIQUANT LA DATE DE L'ACHAT INITIAL OU, 51 VOUS LOUEZ LE PRODUIT, VOTRE CONTRAT DE LOCATION INDIQUANT L'ENDROIT ET LA DATE DE
LA PREMIERE LOCATION. 51 JAMAIS UN SERVICE DE REPARATION EST REQUIS, LE PRODUIT DOlT ~TRE EXPEDIE PENDANT LA PERIODE DE GARANTIE, EN PORT PREP AYE, A L'INTERIEUR DU
PAYS OU L'ACHAT A ETE EFFECTUE SEULEMENT, TEL QU'IL EST EXPLIQUE DANS LE PRESENT DOCUMENT. VOUS ~TES RESPONSABLE DU DEMONT AGE ET DE L'INSTALLA TION DU PRODUIT.
PUSA OU POC, LE CAS ECHEANT, PAIERA POURVOUS RETOURNER LE PRODUIT REPARE OU REMPLACE, A L'INTERIEUR DU PAYS OU L'ACHAT A ETE EFFECTUE.
PERIODE DE GARANTIE DES PRODUITS Pieces
Produits stereo pour l'auto
1 an
Main-d'c:suvre
1 an
La periode de garantie pour les clients qui louent le produit commence le jour ou le produit est utilise pour Ia premiere fois (a) pendant Ia periode de location ou (b) apres Ia vente au detail, selon ce qui se produit en premier.
ELEMENTS NON COUVERTS PAR LA GARANTIE
UN PRODUIT ACHETE CHEZ UN DISTRIBUTEUR NON AUTORISE N'EST COUVERT PAR AUCUNE GARANTIE EXPRESSE OU IMPLICITE, Y COMPRIS QUELQUE GARANTIE
IMPLICITE DE QUALITE MARCHANDE
OU D'ADAPTATION A UN USAGE PARTICULIER QUE CE SOIT. DE PLUS, CE PRODUIT EST STRICTEMENT VENDU "TEL QUEL" ET
" AVEC TOUS SES DEFAUTS EVENTUELS
".
PIONEER N'EST PAS RESPONSABLE DE QUELQUE DOMMAGE CONSECUTIF ET(OU) INDIRECT QUE CE SOIT.
PIONEER
NE GARANTIT PAS LES PRODUITS ENUMERES CI-DESSUS LORSQU'ILS SONT UTILISES A DES FINS COMMERCIALES OU PROFESSIONNELLES, OU AU SEIN
DE TOUTE APPLICATION INDUSTRIELLE OU COMMERCIALE QUE CE SOIT.
LA PRESENTE GARANTIE NE S'APPLIQUE PAS Sl LE PRODUIT A ETE SOUMIS A UNE PUISSANCE NOMINALE EXCEDANT CELLE QUI A ETE ETABLIE DANS LES
DOCUMENTS S'Y APPLIQUANT.
LA PRESENTE GARANTIE NE COUVRE PAS LES TELI2VISEURS OU LES ECRANS ENDOMMAGES EN RAISON DE L'APPLICATION D'IMAGES STATIQUES ET IMMOBILES
PENDANT DE LONGUES PERIODES (IMAGES REMANENTES).
LA PRESENTE GARANTIE NE COUVRE PAS LE COFFRAGE OU LES ELEMENTS ESTHETIQUES, LES ANTENNES INSTALLEES PAR L'UTILISATEUR, LES DOMMAGES AUX
DISQUES
OU AUX RUBANS OU DISQUES D'ENREGISTREMENT, LES DOMMAGES AU PRODUIT DECOULANT D'UNE RETOUCHE, D'UNE MODIFICATION NON AUTORISEE
PAR ECRIT PAR PIONEER, D'UN ACCIDENT, D'UN USAGE INAPPROPRIE
OU D'UN USAGE ABUSIF, LES DOMMAGES PRODUITS PAR LA FOUDRE OU LA SURTENSION,
LES DOMMAGES SUBSEQUENTS DECOULANT DE FUITES, LES DOMMAGES DECOULANT DE PILES DEFECTUEUSES
OU DE L'UTILISATION DE PILES NON
CONFORMES A CELLES QUI SONT SPECIFIEES DANS LE MANUEL DE L'UTILISATEUR.
LA PRESENTE GARANTIE NE COUVRE PAS LE COOT DES PIECES OU DE LA MAIN-D'CEUVRE QUI SERAIENT AUTREMENT OFFERTES SANS FRAIS EN VERTU DE LA
PRESENTE GARANTIE, Sl ELLES SONT OBTENUES AUPRES D'UNE SOURCE AUTRE QU'UNE SOCIETE DE SERVICE OU AUTRE AUTORISEE OU DESIGNEE PAR
PIONEER.
LA PRESENTE GARANTIE NE COUVRE PAS LES DEFECTUOSITES OU LES DOMMAGES CAUSES PAR L'UTILISATION D'UNE MAIN-D'CEUVRE OU DE PIECES
NON AUTORISEES, Nl D'UN ENTRETIEN INADEQUAT.
LES NUMEROS
DE SERlE MODIFIES, OBLITERES OU ENLEVES ANNULENT LA PRESENTE GARANTIE DANS SA TOTALITE.
INVALIDITE DE TOUTE AUTRE GARANTIE
AUX ETATS-UNIS- PIONEER LIMITE SES OBLIGATIONS EN VERTU DE TOUTE GARANTIE IMPLICITE QUE CE SOIT.lY COMPRIS ENTRE AUTRES LES GARANTIES IMPLICITES
DE QUALITE MARCHANDE OU D'ADAPTATION A UN USAGE PARTICULIER, A UNE PERIODE N'EXCEDANT PAS LA PERIODE DE GARANTIE. AUCUNE GARANTIE NE S'APPLIQUE
APRES LA PERIODE
DE GARANTIE. CERTAINS ETATS NE PERMETTENT PAS LA LIMITATION DE LA DUREE D'UNE GARANTIE IMPLICITE, ET CERTAINS NE PERMETTENT PAS
L'EXCLUSION
OU LA LIMITATION DES DOMMAGES CONSECUTIFS OU INDIRECTS. LES LIMITATIONS ET EXCLUSIONS ETABLIES CI-DESSUS PEUVENT DONC NE PAS
S'APPLIQUER A VOUS.
LA PRESENTE GARANTIE VOUS DONNE DES DROITS LEGAUX SPECIFIQUES. VOUS POUVEZ JOUIR D'AUTRES DROITS, QUI PEUVENT VARIER D'UN
ETAT A L'AUTRE.
AU
CANADA- SOUS RESERVE DE CE QUI EST EXPRESSEMENT STIPULE DANS LES PRESENTES, AUCUNE REPRESENTATION, GARANTIE, OBLIGATION OU CONDITION,
QU'ELLE SOIT IMPLICITE, OBLIGATOIRE
OU AUTRE, NE S'APPLIQUE ACE PRODUIT.
SERVICE
Pour profiter du service en vertu de Ia garantie aux Etats-Unis et au Canada, vous devez presenter votre releve de caisse ou, si vous louez le produit, votre contrat de location
indiquant l'endroit et Ia date de Ia transaction par le premier proprietaire.
AUX ETATS-UNIS- Communiquez avec un des partenaires Pioneer suivants pour le service:
Votre marchand Pioneer autorise- Votre marchand Pioneer peut reparer ou remplacer votre unite, ou bien vous diriger vers une societe de service Pioneer autorisee. Votre re9u
de caisse devrait enumerer ses coordonnees (numeros de telephone et de telecopieur, courriel, etc.).
Votre societe de service autorisee -Celle-ci peut reparer Ia plupart des produits electroniques pour l'auto et vous aviser des options supplementaires qui pourraient s'appliquer.
Veuillez acceder au site Web de Pioneer awww.pioneerelectronics.com, cliquer sur l'onglet" Service and Support" et choisir" Authorized Service Locator" pour trouver Ia societe
de service Pioneer Ia plus proche.
Pioneer Electronics
Service- Ce service peutvous aviser des options de service optimales pourvotre modele et votre emplacement geographique. Veuillez consulter les coordonnees
ci-dessous pour communiquer avec Pioneer par telephone, par courrier ou par le biais de son site Web.
AU CANADA - POC a designe un certain nombre de societas de service autorisees partout au Canada si jamais vous avez besoin de services de reparation pour votre produit.
Communiquez avec Pioneer Electronique du Canada (les coordonnees se trouvent ci-dessous) pour trouver une societe de service autorisee.
Expedition de votre unite aux fins de service- Si vous expediez l'unite, vous devez l'emballer soigneusement et l'envoyer a une societe de service autorisee ou aPioneer,
en
port prepaye et selon une methode de transport pouvant etre suivie et assuree. Emballez le produit au moyen de materiaux coussines adequats pour eviter les dommages
pendant le transport. lncluez votre nom, votre adresse et un numero de telephone ou nous pouvons vous joindre pendant les heures de bureau.
Pour toutes les plaintes et problemas aux Etats-Unis, communiquez avec le service de Soutien a Ia clientele au 1-800-421-1404. Au Canada, communiquez avec le groupe de
Satisfaction de Ia clientele au 1-877-283-5901.
Pour le raccordement ou le fonctionnement de votre unite, ou pour trouver une societe de service autorisee, appelez ou ecrivez a:
AUX ETATS-UNIS AU CANADA
PIONEER ELECTRONICS SERVICE, INC.
P.O.
BOX 1760
LONG BEACH, CALIFORNIA 90801
1-800-421-1404
http://www.pioneerelectronics.com
REGLEMENT DES CONFLITS
GROUPE DE SATISFACTION DE LA CLIENTELE
PIONEER ELECTRONIQUES DU CANADA, INC.
340 FERRIER STREET, UNIT 2,
MARKHAM, ON L3R 2Z5
[phone]
1-877-283-5901
http://www.pioneerelectronics.ca
AUX ETA TS-UNIS -Si un conflit se produit entre vous et Pioneer a pres Ia reponse a une demande initiale faite au service de So uti en aIa clientele, vous pouvez avoir
recours au Programme de resolution des plaintes de Pioneer pour resoudre le conflit. Ce programme vous est offert sans frais. Vous devez avoir recours au Programme
de resolution des plaintes avant de vous prevaloir de vos droits ou de chercher reparation en vertu du Titre I de Ia loi Magnuson-Moss Warranty-Federal Trade Commission
Improvement Act, 15 U.S.C. 2301 et s.s.
Pour avoir recours au Programme de resolution des plaintes, appelez au 1 800 421-1404 et expliquez au representant du service a Ia clientele qui vous repondra le
probleme auquel vous faites face et les demarches que vous avez entreprises pour faire reparer le produit pendant Ia periode de garantie, puis donnez-lui le nom du
distributeur I marchand autorise aupres duquel vous vous etes procure le produit Pioneer. Une fois que votre plainte a ete expliquee au representant, un numero de
resolution vous sera communique. Pioneer etudiera le conflit et, dans un delai de quarante (40) jours a pres Ia reception de votre plainte, (1) repondra a votre plainte
par ecrit pour vous aviser des demarches qu'elle entreprendra pour resoudre le conflit, et indiquera combien de temps ces demarches prendront ; ou (2) repondra
a votre plainte par ecrit pour vous indiquer les raisons pour lesquelles elle n'entreprendra aucune demarche.
AU CANADA - Communiquez avec le directeur de Ia Satisfaction de Ia clientele au [phone] pour dlscuter de votre plainte et resoudre rapidement le problema.
ENREGISTREZLE LIEU ETLADATE D'ACHATPOUR REFERENCE ULTERIEURE
NO. du modele: _______________________ NO. deserie : ____________________________ _
Date d'achat:
Achetede: ------------------------------
PRENEZSOINDEGARDERCETTEINFORMAllONETVOTRERE<;UDAa-iATDANSUNENDROITsOR <
5727000000271 >
lmprime en Chine ·

PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONICS OF CANADA, INC.
LIMITED WARRANTY
WARRANTY VALID ONLY
IN
COUNTRY OF PRODUCT PURCHASE
WARRANTY
Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSA
in
the U.S.A, and by POC
in
Canada that fail to
function properly under normal use due to a manufacturing defect when installed and operated according to the owner's manual enclosed with the unit will
be
repaired or replaced with a
unit ofcomparable value, at the option of PUSA or POC, without charge to you for parts or actual repair work. Replacement units and/or parts supplied under this warranty may
be
new or rebuilt at the option of PUSA or POC.
THISLIMITED
WARRANTY
APPLIESTOTHE
ORIGINAL
OR
ANY
SUBSEQUENTOWNEROFTHIS PIONEERPRODUCTDURINGTHE
WARRANTY
PERIODPROVIDEDTHE
PRODUCT
WAS
PURCHASED
FROM
AN
AUTHORIZEDPIONEER
DISTRIBUTOR/DEALER
IN
THE
U.S.A.
OR
CANADA.
YOU
WILL
BE
REQUIRED
TO
PROVIDEA
SALES
RECEIPT
OR
OTHER
VALID
PROOFOFPURCHASESHOWING
THE
DATEOF
ORIGINAL
PURCHASEOR,
IF
RENTED,
YOUR
RENTAL
CONTRACT
SHOWINGTHE
PLACE
AND
DATE
OFFIRSTRENTAL. INTHEEVENTSERVICEISREQUIRED,THEPRODUCTMUST
BE
DELIVEREDWITHINTHE
WARRANTY
PERIOD,TRANSPORTATIONPREPAID,
ONLY
FROM WITHIN
THE
COUNTRY
OF
PURCHASE
AS
EXPLAINED
IN THIS DOCUMENT. YOU
WILL
BE
RESPONSIBLE
FOR
REMOVAL
AND
INSTALLATION
OF THE
PRODUCT.
PUSA
OR
POC,
AS
APPROPRIATE,
WILL
PAY
TO
RETURNTHE REPAIRED
OR
REPLACEMENT
PRODUCTTO YOU WITHIN THE COUNTRYOF PURCHASE.
PRODUCTWARRANTYPERIOD
Car Stereo
Products
~
1 Year
Jd.l2.Q.r
1 Year
The warranty period for retail customers who rent the product commences upon the date product is first put into use
(a)
during the rental period or
(b)
retail sale, whichever occurs first.
WHAT
IS NOT COVERED
IFTHIS PRODUCTWASPURCHASEDFROMANUNAUTHORIZEDDISTRIBUTOR,THEREARENOWARRANTIES,EXPRESSORIMPLIED,INCLUDINGTHEIMPLIEDWARRANTY
OFMERCHANTABILITYANDTHE IMPLIEDWARRANTYOFFITNESS
FORA
PARTICULARPURPOSEANDTHIS PRODUCT
IS
SOLDSTRICTLY
"AS
IS"AND"WITH
ALL
FAULTS".
PIONEER
SHALL
NOTBELIABLEFORANY
CONSEQUENTIALAND/ORINCIDENTALDAMAGES.
PIONEERDOES NOTWARRANTANYPRODUCT LISTEDABOVEWHEN ITIS USEDIN A TRADEORBUSINESSORINANYINDUSTRIALORCOMMERCIALAPPLICATION.
THISWARRANTYDOES NOTAPPLYIFTHE PRODUCTHASBEEN SUBJECTEDTO POWERIN EXCESSOFITS PUBLISHEDPOWERRATING.
THIS
WARRANTY
DOES NOTCOVERDISPLAYSCREENS DAMAGED
BY
STATIC, NON-MOVING,IMAGESAPPLIEDFORLENGTHY PERIODS (BURN-IN).
THISWARRANTYDOESNOTCOVERTHECABINETORANYAPPEARANCEITEM,USERA
TTACHEDANTENNA,ANYDAMAGETORECORDSORRECORDINGTAPESORDISCS,ANY
DAMAGETOTHEPRODUCTRESULTINGFROMALTERA
TIONS,MODIFICATIONSNOTAUTHORIZED
IN
WRmNG
BYPIONEER,ACCIDENT,MISUSEORABUSE,DAMAGEDUETO
UGHTNINGORTOPOWERSURGES,SUBSEQUENTDAMAGEFROMLEAKING,DAMAGEFROMINOPERATIVEBA
TTERJES,ORTHEUSEOFBA
TTERJESNOTCONFORMINGTOTHOSE
SPECIFIEDINTHEOWNER'S
MANUAL
THISWARRANTYDOESNOTCOVERTHECOSTOFPARTSORLABORWHICHWOULD
BEOTHERWISEPROVIDEDWITHOUTCHARGEUNDER
THISWARRANTYOBTAINEDFROM
ANYSOURCEOTHERTHANAPIONEERAUTHORIZEDSERVICECOMPANYOROTHERDESIGNATEDLOCATION.THISWARRANTYDOESNOTCOVERDEFECTSORDAMAGECAUSED
BY
THEUSEOFUNAUTHORIZEDPARTSORLABOR
ORFROM IMPROPERMAINTENANCE.
ALTERED,DEFACED,ORREMOVEDSERIALNUMBERSVOIDTHISENTIREWARRANTY
NOOTHERWARRANTIES
IN
THE
U.S.A.
-
PIONEER
LIMITS
ITS
OBLIGATIONS
UNDER
ANY
IMPLIED
WARRANTIES
INCLUDING,
BUT
NOT
LIMITED
TO,
THE
IMPLIED
WARRANTIES
OF
MERCHANTABILITY
AND
FITNESSFORA PARTICULARPURPOSE,TOA PERIODNOTTOEXCEEDTHEWARRANTYPERIOD. NOWARRANTIES
SHALL
APPLYAFTERTHE
WARRANTYPERIOD. SOMESTATESDONOT
ALLOW
LIMITATIONSONHOWLONGANIMPLIEDWARRANTYLASTS
AND
SOMESTATESDONOT
ALLOW
THEEXCLUSIONS
OR
LIMITATIONSOFINCIDENTAL
OR
CONSEQUENTIALDAMAGES, SOTHE
ABOVE
LIMIT
AllONS
OR
EXCLUSIONS
MAY
NOT
APPLY
TO
YOU. THIS
WARRANTY
GIVES
YOU SPECIFIC
LEGAL
RIGHTS
AND
YOU
MAY
HAVE
OTHER
RIGHTS WHICH
MAY
VARY
FROM
STATE
TO STATE.
IN
CANADA-
EXCEPT
AS
EXPRESSLYPROVIDEDHEREIN, THERE
ARE
NOREPRESENTATIONS,WARRANTIES,OBLIGATIONSORCONDITIONS, IMPLIED,STATUTORY
OR
OTHERWISE,
APPLICABLE
TOTHIS PRODUCT.
TO OBTAIN SERVICE
In the U.S.A.
or
Canada
to receive warranty service you need to present your sales receipt or your rental contract showing place and date
of
original owner's transaction.
~
-
Please
contact
one
of
the
following
Pioneer
partners
to
obtain
service:
Your
Authorized Pioneer
Dealer-
Your
Pioneer Dealer may repair or replace
your
unit, or refer you to an Authorized Pioneer Service
Company
.
Your
sales receipt should
list the
contact
information
(phone
number, fax, email,
etc
.)
for
your
Dealer.
Your
Authorized
Pioneer
Service
Company-
Can perform repairs for
most
Car
Electronics products and can advise
other
options as applicable. Please access the
Pioneer
website
at
www.pioneerelectronics.com
and
click on
Service
and
Support
and
select
Authorized
Service
Locator
to
find the
nearest
Pioneer
servicer
.
Pioneer
Electronics
Service-
Can advise
the
optimal service option
for
your
model
and
geographic
location. Please reference the information listed
below
and phone,
email
or
access
the
Pioneer
website to
contact
Pioneer.
~-
POC has a number
of
Authorized Service Companies should your product require service. Contact Pioneer
of
Canada as listed belowto obtain a local service location.
Shipping
Your
Unit
for
Service-
Please package it carefully and send
it,
transportation prepaid by a traceable, insured method, to an Authorized Service Company or Pioneer.
Use adequate padding material to prevent damage in transit. Include your name, address and telephone number where you can be reached during business hours.
On
all complaints and concerns
in
the U.S.A. call Customer Support at 1-800-421-1404, or,
in
Canada, call Customer Satisfaction at 1-877-283-5901.
IN
THE
U.S.A.
IN
CANADA
For hook-up and operation of your unit or
to
locate
an
Authorized Service Company, please call or write:
PIONEERELECTRONICSSERVICE,
INC.
P.O. BOX 1760
LONG BEACH, CALIFORNIA 90801
1-800-421-1404
http://www.pioneerelectronics.com
DISPUTERESOLUTION
For additional information
on
this warranty, please call or write:
CUSTOMERSATISFACTIONGROUP
PIONEERELECTRONICSOF CANADA,
INC
.
340 FERRIERSTREET, UNIT
2,
MARKHAM, ON L3R 2Z5
[phone] 1-877-283-5901
http://www.pioneerelectronics.ca
IN
THE
U.S.A. -Following
our
response to
any
initial request to
Customer
Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint
Resolution Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program
before you exercise
any
rights under,
or
seek
any
remedies, created by Title I of the Magnuson-MossWarranty-Federal Trade Commission Improvement
Act,
15 U.S.C.
2301
et
seq
.
To
use the Complaint Resolution Program call 1-800-421-1404
and
explain to
the
customer
service representative the problem you are experiencing, steps you have taken
to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product
was
purchased. After the complaint
has been explained to the representative, a resolution
number
will be issued. Within
40
days
of
receiving
your
complaint, Pioneer will investigate the dispute and will either:
(1) respond to
your
complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute;
or
(2) respond to your complaint in writing
informing you
why
it will not take
any
action.
IN
CANADA-
Call the
Customer
Satisfaction
Manager
at
[phone] to discuss your complaint
and
to obtain a
prompt
resolution.
RECORDTHEPLACEANDDATEOFPURCHASEFORFUTUREREFERENCE
Model No.
------------------
Serial No.
_________________
Purchase Date
________
_
PumhasedFrom
---------------------------------------------------------
KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE
< 5727000000271 >
Printed
in
China