Pioneer DEH-X4900BT User manual
CD RDS RECEIVER
DEH-X4900BT
DEH-X3900BT
DEH-X391 ОВТ
Р,опе
PANDOR�
фspoti®
О Bluetooth®
Made for
i iPod D iPhone
Owner's Manual
� lmportant (Serial number)
m
"
ITable
of
Contents
Before
You
Start
....................................................................................... 2
Getting
Started........................................................................................ 3
Radio.............................•............................................................................ 6
CD/USB/iPod/
AUX
................................................................................... 7
Bluetooth
.................................................................................................. 8
App
Mode
...............................................................................................
11
Pandora®........................................................................•........................ 12
S
potify®
....
................................
...
...
...
............................................
...
....... 13
Using Pioneer
ARC
APP
........................................................................ 14
Settings................................................................................................... 14
FUNCTION settings .............................................................................. 15
AUDIO settings...••.................................................•............................... 15
SYSTEM
settings ................................................................................... 16
ILLUMINATION settings....................................................................... 18
MIXTRAX settings................................................................................. 18
Connections/Installation..................................................................... 19
Additional
Information
........................................................................ 22
About
this
manual:
• In
the
following
instructions, a
USB
memory
or
USB
audio player are referred
to
as
"USB
device".
• In this manual, iPod and iPhone are referred
to
as
"iPod':
2
En
IBeforeYou
Start
Thank you
for
purchasing
this
PIONEER
product
To
ensure proper
use,
please read
through
this manual before using this product. It
is
especially
important
that
you read and observe WARNINGs and CAUTIONs in this manual.
Please
keep the
manual
in
a
safe
and accessible place for future reference.
FCC
10:
AJDK071
MODEL
NO.
:DEH-X4900BT/DEH-X3900BT/DEH-X391
OBT
IC:
775E-K071
This device complies
with
Part
15
of
FCC
Rules
and Industry Canada licence-exempt
RSS
standard(s).
Operation
is
subject
to
the
following
two
conditions:
(1)
this device may
not
cause interference, and
(2)
this device must accept any interference, including interference
that
may cause undesired
operation
of
this device.
This transmitter must
not
be co-located
or
operated in conjunction
with
any
other
antenna or
transmitter.
The Bluetooth antenna
cannot
be removed (or replaced) by
user.
This
equipment
complies
with
FCC/IC
radiation exposure limits set forth for
an
uncontrolled
environment and meets the
FCC
radio frequency
(RF)
Exposure Guidelines and
RSS-1
02
of
the
IC
radio frequency
(RF)
Exposure rules. This
equipment
has
very
low
levels
of
RF
energy
that
it
deemed
to
comply
without
maximum permissive exposure evaluation
(MPE).
But
it
is
desirable
that
it
should
be installed and operated keeping the radiator at least 20cm
or
more away from person's
body
(excluding extremities: hands, wrists, feet and ankles).
Alteration or modifications carried
out
without
appropriate authorization may invalidate the user's
right
to
operate the equipment.
Note
This
equipment
has
been tested and
found
to
comply
with
the limits for a
Class
Bdigital device,
pursuant
to
Part
15
of
the
FCC
Rules.
These limits are designed
to
provide reasonable protection
against harmful interference in a residential installation. This
equipment
generates,
uses
and
can
radiate radio frequency energy and,
if
not
installed and used in accordance
with
the instructions,
may cause harmful interference
to
radio communications. However, there
is
no guarantee
that
interference will
not
occur in a particular installation.
If
this
equipment
does cause harmful
interference
to
radio or television reception, which can be determined by
turning
the
equipment
off
and on, the user
is
encouraged
to
try
to
correct the interference by one
or
more
of
the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between
the
equipment
and receiver.
-Connect
the
equipment
into
an
outlet
on a circuit different from
that
to
which the receiver
is
connected.
-Consult
the dealer
or
an
experienced radio/TV technician
for
help.
The Safety
of
Your
Ears
is
in Your Hands
Get the most
out
of
your
equipment
by playing
it
at a
safe
level-a
level
that
lets the sound come
through
clearly
without
annoying blaring
or
distortion and, most importantly,
without
affecting
your
sensitive hearing. Sound can be deceiving.
AwдRNING
o
А CAUTION
соте
CLASS 1 LASER PRODUCT
After-sales service for Pioneer products
1 Getting Started
DEH-X4900BT
"1
En 3
m
'
DEH-X3900BT/X391
OBT
M.C.
(multi-control)
dial
USB
port
~
(eject) Disc
loading
slot
SRC
(source)/OFF
~
BAND/!:>
DISP
(display) Detach
button
AUX
input
jack
(3.5
mm
stereojack)
Remote Control
VOLUME+/-
MUTE
SRC
(source)
DISP
(display)
Frequentlyused
operations
The available
buttons
vary
depending
on
the
unit.
Turn
on
the
power*
Press
SRC/OFF
to
turn
on
Press
SRC
to
turn
on
the
the
power. power.
Press
and
hold
SRC/OFF
to
Press
and
hold
SRC
to
turn
turn
off
the
power.
off
the
power.
4En
Adjust
the
volume
Turn
the
M.C. dial.
Press
VOLUME+
or-.
Press
MUTE
to
mute
the
unit.
Press
MUTE
again
or
press
VOLUME
+
or-
to
unmute.
Select a source
Change
the
display
information
Return
to
the
previous
display/list
Press
SRC/OFF
repeatedly.
Press
SRC
repeatedly.
Press
DISP repeatedly.
Press
DISP repeatedly.
Press
BAND/!:>.
Press
<1111111/....,_
to
select
the
next/previous
folder.
Return
to
the
normal
display
Press
and
hold
BAND/!:::> .
from
the
menu
Answering a call
Press~.
Press
C..
Ending a call
Press~.
Press~.
* When this unit's
blue/white
lead
is
connected
to
the vehicle's auto-antenna relay control terminal,
thevehicle's antenna extends when this unit's source
is
turned on.
To
retract the antenna, turn the
source
off
.
Display
indication
The
following
indication
may
vary
depending
on
the
unit.
LOC
Appears
when
a
lower
tier
of
the
menu
or
folder
exists.
Appears
when
a
Bluetooth
telephone
is
connected
to
this
unit
by
HFP
(Hands Free Profile) (page
8)
and flashes
while
the
telephone
is
on
hold.
Appears
when
a
Bluetooth
audio
player
is
connected
to
this
unit
by
A2DP
(Advanced
Audio
Distribution
Profile) (page
8).
Appears
when
the
local seek
tuning
function
is
set (page
15).
Appears
when
the
sound retriever
function
is
set (page
15).
Appears
when
random/shuffle
play
is
set (except
when
BT
AUDIO
is
selected
as
the
source).
Appears
when
repeat play
is
set (except
when
BT
AUDIO
is
selected
as
the
source).
Appears
when
the
iPod
control
function
is
set (page
8).
Appears
when
a
Bluetooth
connection
is
made
(page
8).
Detach Attach
1'
AwдRNING
How to replace the battery
(+)
CAUTION
1
2
CLOCKSEТ
PHONE CONNECТ
3
En 5
m
�
'
4
Press
the
M.C. dial
to
confirm
the
settings.
NOTES
•
You
can cancel
the
menu
setting
by
pressing SRC/OFF.
• These settings can be made
at
any
time
from
the
SYSTEM
settings (page 16) and INITIAL settings
(page
6).
1
Press
the
M.C. dial
to
display
the
main menu.
2 Turn
the
M.C. dial
to
select
[SYSTEM],
then
press
to
confirm.
3 Turn
the
M.C. dial
to
select [DEMO
OFF],
then
press
to
confirm.
4 Turn
the
M.C. dial
to
select
[YES],
then
press
to
confirm.
1
Press
and hold
SRC/OFF
until
the
unit
turns off.
2
Press
the
M.C. dial
to
display
the
main menu.
3 Turn
the
M.C. dial
to
select [INITIAL],
then
press
to
confirm.
4 Turn
the
M.C. dial
to
select an
option,
then
press
to
confirm.
SP-P/0
MODE
[REAR/SUB.W]
[SUB.W/SUB.W]
[REAR/REAR]
6En
Select when there
is
afull-range speaker connected
to
the
rear
speaker
output
leads and there
is
a subwoofer connected
to
the
RCA
output.
Select when there
is
a passive subwoofer connected directly
to
the
rear speaker
output
leads and there
is
a subwoofer
connected
to
the
RCA
output.
Select when there are full-range speakers connected
to
the
rear
speaker
output
leads and
RCA
output.
If
there
is
afull-range
speaker connected
to
the rear speaker
output
leads, and the
RCA
output
is
not
used, you may select either
[REAR/SUB.W]
or
[REAR/REAR].
S/WUPDATE
[SYSTEM
INFO]
[SYSTEM
UPDATE]
[BT
VERSION]
[BT
UPDATE]
SYSTEM
RESET
[YES],
[NO]
IRadio
Select
to
confirm the latest system information on the unit.
Select
to
update the
unit
to
the latest software and initialize the
unit
settings.
For
details on the latest software and updating,
visit our website.
Select
to
display the system version
of
the
unit
and the
Bluetooth module.
Select
to
update the
unit
to
the latest Bluetooth software. For
details on Bluetooth software and updating, visit our website.
Select
[YES]
to
initialize the
unit
settings. The
unit
will be
restarted automatically.
(Some
of
the settings will be retained even after resetting the
unit, such
as
Bluetooth pairing information, etc.)
The
tuner
frequencies
on
this
unit
are allocated
for
use in
North
America.
Use
in
other
areas may result in
poor
reception.
1
Press
SRC/OFF
to
select [RADIO].
2
Press
BAND/~
to
select
the
band
from
[FM1
],
[FM2], [FM3]
or
[AM].
3
Press
a
number
button
{1/A
to
6/¢..).
TIP
The~~~
buttons
can be also used
to
select a preset station
when
[SEEK]
is
set
to
[PCH] in
the
FUNCTION settings (page 15).
The six strongest stations are stored
on
the
number
buttons
(1/A
to
6/¢..).
1 After selecting
the
band, press
the
M.C. dial
to
display
the
main menu.
2 Turn
the
M.C. dial
to
select [FUNCTION],
then
press
to
confirm.
3 Turn
the
M.C. dial
to
select [BSM],
then
press
to
c;onfirm.
To
seeka
station
manually
1
After
selecting
the
band, press
....._/~
to
select a station.
Press
and hold
....._/~
then release
to
seek
an
available station. Scanning stops
when the
unit
receives a station.
To
cancel seek tuning, press
....._/~.
NOTE
[SEEK]
needs
to
be set
to
[MAN] in
the
FUNCTION
settings (page 15).
To
store stations
manually
1 While receiving
the
station you
want
to
store, press and
hold
one
of
the
number
buttons
(1/
A
to
6/¢..)
until
it
stops flashing.
ICD/USB/iPod/AUX
Disconnect headphones from the device before connecting
it
to
the unit.
CD
1
Insert
a disc
into
the
disc
loading
slot
with
the
label side up.
To
eject a disc, stop playback first then press
~.
USB
devices
{including
Android™}/iPod
1 Open
the
USB
port
cover.
2 Plug
in
the
USB
device/iPod using an
appropriate
cable.
NOTE
To
automatically switch
to
[USB]
source when a
USB
device/iPod
is
connected
to
the
unit, set
[USB
AUTO]
to
[ON] in
the
SYSTEM
settings (page
16).
A cAUTION
Use
an
optional
Pioneer
USB
cable
(CD-USOE)
to
connect
the
USB
device
as
any device connected
directly
to
the
unit
will
protrude
out
from
the
unit, which could be dangerous.
Before removing the device, stop playback.
AOA
connections
For
details on
AOA
connection,
see
page 14.
MTP
connection
A device installed
with
Android
OS
4.0
or
later can be connected
to
the
unit
via
MTP,
using
the
cable
supplied
with
the
device. However,
depending
on
the
connected device and
the
numbers
of
the
files in
the
device, audio files/songs may
not
be able
to
be played back via
MTP.
Note
that
MTP
connection
is
not
compatible
with
WAV
file formats, and cannot be used
with
the
MIXTRAX function.
NOTE
If
you use an
MTP
connection,
[PHONE
CONNECn needs
to
be set
to
[MEMORY] in the
SYSTEM
settings
(page 16).
AUX
1
Insert
the
stereo
mini
plug
into
the
AUX
input
jack.
2 Press
SRC/OFF
to
select [AUX]
as
the
source.
NOTE
If
[AUX]
is
set
to
[OFF]
in
the
SYSTEM
settings, [AUX] cannot be selected
as
a source (page
16).
You
can make various adjustments in the
FUNCTION
settings (page
15).
Note
that
the
following operations
do
not
work for
an
AUX
device.
To
operate
an
AUX
device,
use
the device itself.
Fast
forward or reverse*2
Search
for afile from a list 1
Press
0..
to display the list.
2 Turn the M.C. dial
to
select the desired
file (folder) name or category, then
press
to confirm.
3 Turn the M.C. dial
to
select the desired
file, then
press
to confirm.
Playback starts.
View a list
of
the files
in
the selected folder/
Press
the M.C. dial when afolder/category
category*1
is
selected.
Play
asong
in
the selected folder/
Press
and hold the M.C. dial when afolder/
category*1 category
is
selected.
En
7
Alphabetical
search
(iPod
only)
Repeat play
Random/shuffle play
Shuffle all play
(iPod
only)
1
Press
0..
to display the list.
2
Turn the
M.C.
dial to select the desired
category list, then
press
0..
to enter the
alphabetical
search
mode.
(Turning the
M.C.
dial twice also enters
the alphabetical
search
mode.)
3 Turn the M.C. dial
to
select aletter, then
press
to
display the alphabetical list.
To
cancel alphabetical search,
press
BAND/
!::>.
Press
6/~.
Press
5/~.
Press
and hold
5/~.
Pause/resume playback
Press
4/PAUSE.
Return
to
root folder
(CD/USB
only)*l
Press
and hold
0...
Switch between compressed audio and
CD-
Press
BAND/!:>.
DA
(CD
only)
Change drives in
USB
device
Press
BAND/!:>.
(Devices that support the
USB
mass
storage
device
class
protocol only)
*1
Compressed audio files only
*2 When you
use
the fast forward
or
reverse function while playing a
VBR
file, the playback
time
may
be
not
correct.
Link
play
mode
You
can
access
songs based on
the
artist, album,
or
genre currently playing.
1 While listening
to
a song, press and hold
0..
to enter
the
link play mode.
2
Turn
the
M.C. dial to select
the
mode
([ARTIST], [ALBUM], [GENRE]), then press to
confirm.
The selected song/album
will
be played after
the
currently playing song.
NOTE
The selected song/album may be canceled
if
you
use
functions otherthan those from the link play
mode
(e.g.
fast forward and reverse).
iPod control
You
can control
the
unit
via a connected iPod.
The
following
iPod models are
not
compatible
with
this function.
-iPod nano 1st generation, iPod
with
video
1
Press
BAND/!::>
during playback,
then
select
the
control mode.
[CONTROL iPod]: The unit's iPod
function
can be operated from
the
connected iPod.
[CONTROL AUDIO]: The unit's iPod
function
can only be operated
by
the
buttons
on
the
unit
or
supplied remote control. In this mode,
the
connected iPod cannot be
turned on
or
off.
NOTES
• Switching the control mode
to
[CONTROL
iPod] pauses song playback.
Use
the connected iPod
to
resume playback.
• The following operations
are
still accessible from the unit, even
if
the control mode
is
set
to
[CONTROL
iPod].
-Pause, fast forward/reverse, song/chapter selection
• The volume
can
only be adjusted from the unit.
The MIXTRAX
function
creates a non-stop
mix
of
your music library, accompanied
by
illumination effects. For details on MIXTRAX settings,
see
page
18.
NOTES
• This function
is
not
compatible
with
an
Android device connected via
MTP.
• When
USB
is
selected
as
a source and the
MIXTRAX
function
is
in
use,
the sound retriever function
is
disabled.
• Depending on the file/song, sound effects may
not
be
available.
• Turn
the
MIXTRAX
function
off
if
the
illumination effects
it
produces interfere
with
driving.
1
Press
3/MIX
to turn MIXTRAX on/off.
IBluetooth
c!>=
Important
Iffive or more Bluetooth devices
(e.g.
a phone and separate audio player)
are
connected, they may
not
work properly.
1 Turn on the Bluetooth function
of
the
device.
If
you make a Bluetooth connection
from
the
device, proceed
to
step
6.
2 Press
~
to
display
the
phone
menu.
3 Turn
the
M.C.
dial
to
select [BT SETTING],
then
press
to
confirm.
4 Turn
the
M.C.
dial
to
select [ADD DEVICE],
then
press
to
confirm.
The
unit
starts
to
search for available devices,
then
displays
them
in
the
device list.
•
To
cancel searching, press
the
M.C. dial.
•
If
the
desired device
is
not
in
the
list, select
[RE-SEARCH].
•
If
there
is
no
device available, [NOT FOUND] appears in
the
display.
S Turn
the
M.C.
dial
to
select a device
from
the
device
list,
then
press
to
confirm.
Press
and hold
the
M.C. dial
to
switch the displayed device
information
between the
Bluetooth device address and device name.
If
you make a Bluetooth connection from
the
unit, proceed
to
step 7.
6 Select [Pioneer
BT
Unit]
shown
in
the
device
display.
7
Make
sure
the
same
6-digit
number
appears
on
this
unit
and
the
device,
then
select "Yes"
on
the
device.
NOTES
•
[DEVICE
FULL]
appears
if
the
unit
has
already been paired
with
five
other
devices.
In
this
case,
delete
one
of
the paired devices.
See
[DEL
DEVICE]
or
[GUEST
MODE] in the Bluetooth settings (page
9).
• Depending on
the
device, the
PIN
code
is
required in step
?.In
this
case,
input
[0000].
TIP
The Bluetooth connection can be also made by detecting
the
unit
from the Bluetooth device.
To
do
so,
[VISIBLE]
in
the
Bluetooth settings needs
to
be set
to
[ON]. For details on a Bluetooth device operations,
refer
to
the
operating instructions supplied
with
the Bluetooth device.
Bluetooth
settings
DEVICELIST
DEL
DEVICE
[DELETE
YES],
[DELETE
NO]
ADD
DEVICE
Display the list
of
paired Bluetooth devices."*" appears on the
device name when the Bluetooth connection
is
established.
When no device
is
selected
in
the device list, this function
is
not
available.
Delete the device information.
When no device
is
selected
in
the device list, this function
is
not
available.
Register a new device.
Iffive devices
are
already paired, this function
is
not
available.
You
can
check the number
of
paired devices on the
[DEVICELIST]
setting.
A.
CONN
Select [ON]
to
connect
to
a Bluetooth device automatically.
[ON],
[OFF]
VISIBLE
[ON],
[OFF]
Select [ON]
so
that a Bluetooth device
can
detect the unit when
the unit
is
connected
via
Bluetooth
to
another device.
PIN
CODE
Change the
PIN
code.
1
Press
the M.C. dial
to
display the setting mode.
2 Turn the M.C. dial to select a number.
3
Press
the M.C. dial
to
move the cursor
to
the next position.
4 After inputting the
PIN
code,
press
and hold the M.C. dial.
After inputting the
PIN
code, pressing the M.C. dial returns you
to
the
PIN
code
input
display, and you can change the
PIN
code.
DEV.INFO
GUEST
MODE
[ON],
[OFF]
Switch the device information on the display between the
device name and Bluetooth device address.
Select [ON]
to
move
to
the
[DEL
DEVICE]
screen automatically
when the
unit
has
already been paired
with
five devices.
A.PAIRING
[ON],
[OFF]
Select [ON]
to
pair the unit and iPhone automatically when
an
iPhone
is
connected
to
the unit via
USB.
(This function may
not
be available depending on the version
of
iOS
you
are
using.)
First, make a Bluetooth connection
with
the
Bluetooth
telephone
(page 8). Up
to
two
Bluetooth telephones can be connected simultaneously.
~Important
• Leaving
the
unit
on standby
to
connect
to
your phone via Bluetooth while the engine
is
not
running
can drain the vehicle's battery.
•
Be
sure
to
park your vehicle in a
safe
place and apply
the
parking brake before operation.
To
make
a
phone
call
1 Press
~
to
display
the
phone
menu.
When
two
phones are connected, a phone name appears first
then
a
phone
menu
will display.
To
switch
to
another
phone, press
~
again.
2 Turn
the
M.C.
dial
to
select
[RECENTS]
or
[PHONE BOOK],
then
press
to
confirm.
If
you select
[PHONE
BOOK],
proceed
to
step 4.
3 Turn
the
M.C.
dial
to
select [MISSED], [DIALED]
or
[RECEIVED],
then
press
to
confirm.
4 Turn
the
M.C.
dial
to
select a
name
or
phone
number,
then
press
to
confirm.
En
9
The
phone
call starts.
To
answer an incoming call
1
Press
~
when
a call
is
received.
TIP
When
two
phones
are
connected to the unit
via
Bluetooth
and
there
is
an
incoming
call
while
one
phone
is
being
used
for a
call,
a
message
will appear
in
the
display.
To
answer
that incoming
call,
you
need
to
end
the existing
call.
Basic
operations
Reject
an
incoming
call
Switch
between
the
current caller
Press
the
M.C. dial.
and a caller on
hold
I a caller on hold
Press
and
hold
~.
Adjust
the
volume
of
the
caller's Turn
the
M.C. dial
during
the
call.
voice (When private
mode
is
on,
this
function
is
not
available.)
Turn
the
eon
or
off
Press
BAND/!:>
during
the
call.
To
preset phone numbers
1 Select a
phone
number
from
a
phone
book
or
call history.
2
Press
and hold
one
of
the
number
buttons
(1/
A
to
6/~}.
The
contact
is
stored in
the
selected preset
number.
To
make a call
using
a preset
number,
press
one
of
the
number
buttons
(1
I A to
6/~
),
then
press
the
M.C.
dial.
Voice recognition {Only for iPhone)
This
function
is
only
available
when
an
iPhone
equipped
with
voice
recognition
is
connected
to
the
unit
via
Bluetooth.
1
Press
and hold
~to
activate
the
voice recognition
mode.
2
Press
the
M.C.
dial
and
then
talk
into
the
microphone
to
input
voice commands.
To
exit
the
voice
recognition
mode,
press
BAND/!:>.
NOTE
For
details
on
the
voice
recognition
features,
refer
to the
manual
supplied with your
iPhone.
10
En
Phone menu
PHONE BOOK*l
PRESET
1-6
A.ANSR*2
[ON],
[OFF]
R.TONE
[ON], [OFF]
PBA.SYNC
[ON],
[OFF]
BTSETTING
Display
the
contacts
which
have been transferred
from
your
phone. Set
[VISIBLE]
in
the
Bluetooth settings
to
[ON]
to
browse
the
contacts via this unit.
Recall
the
preset
phone
numbers.
You
can also recall
the
preset
phone
numbers
by
pressing one
of
the
number
buttons
{1/
A
to6/~}.
Select [ON]
to
answer
an
incoming
call automatically.
Select [ON]
if
the
ring
tone
does
not
come
out
from
the
car
speakers.
Depending
on
the
connected phone, this
function
may
not
work.
Invert
the
order
of
names in
the
phone
book
(name view).
Select
whether
or
not
to
transfer
the
contacts
from
your
phone
automatically
when
your
phone
is
connected
to
the
unit.
• When connected
for
the
first time,
the
contacts from your
phone
are transferred automatically, regardless
of
the
[PB
A.SYNC]
setting.
•
If
you switch
from
[ON]
to
[OFF],
the
auto
synchronization
will
not
be
performed
on
the
next
connection.
•
If
you switch
from
[OFF]
to
[ON],
the
auto
synchronization
will
be
performed
when
your
phone
is
connected
to
the
unit.
• During
the
auto
synchronization, you
cannot
cancel
the
synchronization, even
if
you select
[OFF].
You
can adjust various settings
for
Bluetooth connections. For
details on
Bluetooth
settings,
see
page
9.
*1
The
contacts
on
your phone will normally
be
transferred automatically
when
the phone
is
connected. Ifthey
are
not,
use
your phone to transfer the contacts.
*2 Iftwo
phones
are
connected, this function
does
not work
on
incoming
calls
that
are
received
while
one
ofthe
phones
is
being
used
for a
call.
~Important
•
Depending
on
the
Bluetooth
audio
player
connected
to
this
unit,
the
available
operations
will
be
limited
to
the
following
two
levels:
-A2DP (Advanced
Audio
Distribution
Profile) can
only
play
back
songs
on
your
audio
player.
-
AVRCP
(AudioNideo
Remote
Control
Profile) can
perform
functions
such
as
playback, pause, select
song, etc.
• The
sound
of
the
Bluetooth
audio
player
will
be
muted
when
the
phone
is
in
use.
•
When
the
Bluetooth
audio
player
is
in use,
you
cannot
connect
to
a
Bluetooth
telephone
automatically.
•
Depending
on
the
type
of
Bluetooth
audio
player
you
have
connected
to
this
unit,
operation
and
information
displayed
may
vary based
on
availability
and
functionality.
1
Make
a Bluetooth connection with
the
Bluetooth audio player.
2
Press
SRC/OFF to select
[BT
AUDIO]
as
the
source.
3
Press
BAND/~
to
start playback.
Basic operations
You
can make various adjustments in
the
FUNCTION settings (page
15).
Search
for afile from a list
Press
~
to
display a list.
2
Turn the M.C. dial
to
select the desired
folder name, then press to confirm.
3 Turn the M.C. dial
to
select the desired
file, then
press
to confirm.
Playback starts.
*
Depending
on
the
connected
device, these
operations
may
not
be available.
I
AppMode
You
can enjoy listening
to
an
application on
an
iPhone/Android device via
the
unit.
In
some
cases,
you can control
an
application by using
the
unit.
For details on compatible devices, visit
our
website.
~
~
Important
Use
of
third
party
apps
may
involve
or
require
the
provision
of
personally
identifiable
information,
whether
through
the
creation
of
a user
account
or
otherwise,
and
for
certain applications,
the
provision
of
geolocation
data.
ALL THIRD
PARTY
APPS
ARE
THE
SOLE
RESPONSIBILITY
OF
THE
PROVIDERS,
INCLUDING WITHOUT
LIMITATION COLLECTION AND
SECURITY
OF
USER
DATA
AND
PRIVACY
PRACTICES.
BY
ACCESSING
THIRD
PARTY
APPS,
YOU
AGREE
TO
REVIEW
THE
TERMS
OF
SERVICE
AND
PRIVACY
POLICIES
OF
THE
PROVIDERS.
IF
YOU
DO NOT
AGREE
WITH
THE
TERMS
OR
POLICIES
OF
ANY
PROVIDER
OR
DO NOT
CONSENT
TO
THE
USE
OF
GEOLOCATION
DATA
WHERE
APPLICABLE, DO NOT
USE
THAT THIRD
PARTY
APP.
For
iPhone
users
This
function
is
compatible
with
iPhones
and
iPod
touches
installed
with
iOS
5.0
or
later.
For
Android
device users
This
function
is
compatible
with
devices
that
have
Android
OS
2.3
or
later installed.
NOTE
PIONEER
IS
NOT LIABLE
FOR
ANY THIRD
PARTY
APPS
OR
CONTENT, INCLUDING WITHOUT LIMITATION
THEIR
ACCURACY
OR
COMPLETENESS.
THE
CONTENT AND FUNCTIONALITY
OF
SUCH
APPS
ARE
THE
SOLE
RESPONSIBILITY
OF
THE
APP
PROVIDER.
1 Connect this unit with
the
mobile device.
• iPhone
via
USB
(page
7)
• Android device via Bluetooth (page
8)
2
Press
SRC/OFF to select [APP].
3
Press
and hold
~
to display [PHONE CONNECT].
4 Turn
the
M.C. dial
to
select one
of
the
below, then press to confirm.
• Select [IPHONE/IPOD] for iPhone.
• Select [ANDROID]
for
Android device.
If
you select [IPHONE/IPOD], proceed
to
step
6.
NOTE
When
the
connection
setting
is
changed, a message
that
lets
you
know
that
the
connection
setting
had
been
changed
will
appear
in
the
display. Press
the
M.C.
dial
and
turn
the
M.C.
dial
to
select
[SRC
OFF
:YES],
then
press
to
confirm.
The
unit
turns
off
automatically
and
the
setting
is
executed.
5 Turn
the
M.C. dial
to
select [BLUETOOTH] for
the
Bluetooth connection.
6
Press
SRC/OFF to select [APP].
7 Operate the mobile device to start up
the
application.
En
11
m
:I
~
iii'
:I"
Basic operations
1
2
3
4
12
S
6
7
Basic operations
1 Spotify®
™
2
3
S
Basic operations
IUsing
Pioneer
ARC
A~P
~
P
_ _ __ _
You
can operate
the
unit
from
Pioneer
ARC
APP
installed on an iPhone/
Android device.
In some
cases,
you can control aspects
of
the
application, such
as
source selection,
pause, etc.,
by
using
the
unit.
For detailson
what
operations are available on
the
application,
see
the
application's
help
section.
A
wARNING
Do
not
attempt
to
operate the application while driving. Make sure
to
pull
off
the
road and park your
vehicle in a
safe
location before
attempting
to
use
the
controls on the application.
For iPhone users
This
function
is
compatible
with
iPhones (iPhone 5 or later) and iPod touches installed
with
iOS
8.0
or
later.
You
can
download
Pioneer
ARC
APP
on iTunes
App
Store.
For
Android
device users
This
function
is
compatible
with
devices
that
have Android
OS
4.1
or
later installed and
also
support
AOA
(Android Open Accessory)
2.0.
You
can
download
Pioneer
ARC
APP
on Google
Play.
NOTE
Some Android devices connected via
AOA
2.0
may
not
work properly or emit sounds
due
to
their
own
software design, regardless
of
the
OS
version.
1 Connect this unit with
the
mobile device.
• iPhone/
Android
device via
USB
(page
7)
•
Android
device via
Bluetooth
(page
8)
2
Press
the
M.C. dial
to
display
the
main menu.
3 Turn
the
M.C. dial to select [SYSTEM], then press
to
confirm.
4 Turn
the
M.C. dial to select [PHONE CONNECT],
then
press to confirm.
S
Turn
the
M.C. dial to select one
of
the
below, then press to confirm.
14En
• Select [IPHONE/IPOD]
for
iPhone.
• Select [ANDROID]
for
Android
device.
If
you select [IPHONE/IPOD], proceed
to
step
7.
NOTE
When the connection setting
is
changed, a message that lets you know that the connection
setting had been changed will appear in the display.
Press
the
M.C.
dial and turn the
M.C.
dial
to
select
[SRC
OFF
:YES],
then press
to
confirm. The
unit
turns
off
automatically and the setting
is
executed.
6 Turn
the
M.C. dial
to
select one
of
the
below.
• Select
[APP
CONTROL] for
the
USB
connection.
• Select
[BLUETOOTH]
for
the
Bluetooth connection.
When you select
the
USB
connection, Pioneer
ARC
APP
on
the
Android
device starts
automatically
if
[ON]
is
selected in
[P.APP
AUTO
ON] (page 16).
NOTE
IfPioneer
ARC
APP
has
not
been installed on yourAndroid device yet, a message that prompts you
to
install the application will appear on your Android device. Select
[OFF]
in
[P.APP
AUTO
ON]
to
clear the message (page 16).
7
Press
SRC/OFF
to
select any source.
8 Launch Pioneer
ARC
APP
on
the
mobile
device via
USB
connection.
Press
and hold M.C. dial via Bluetooth connection.
NOTE
When you connect a mobile device
other
than iPhone/Android device, select
[OTHERS]
in the
[PHONE
CONNEcn menu and select
[WIRED]
(for
the
USB
connection)
or
[BLUETOOTH]
(for the Bluetooth
connection). Depending on your mobile device,
it
may
not
operate correctly.
1
Press
SRC/OFF
to
select [ANDROID].
Basic operations
Select atrack
Press~
or
......
Fast
forward or reverse
Press
and hold
~
or ...,....
Pause/resume playback
Press
4/PAUSE.
ISettings
You
can adjust various settings in
the
main menu.
1
Press
the
M.C. dial to display
the
main menu.
2 Turn
the
M.C. dial to select one
of
the
categories below, then press to confirm.
• FUNCTION settings (page 15)
• AUDIO settings (page 15)
•
SYSTEM
settings
(page 16)
• ILLUMINATION
settings
(page 18)
• MIXTRAX
settings
(page 18)
3
Turn
the
M.C.
dial
to
select
the
options,
then
press
to
confirm.
FUNCTION
settings
The
menu
items
vary
according
to
the
source.
LOCAL I
RADIO
Store
the
six strongest stations
on
the
number
buttons
(1
I A
to
6/~)
automatically.
FM: [OFF], [LV1], [LV2], [LV3],
[LV4]
Restrict
the
tuning
station according
to
the
AM:
[OFF], [LV1],
[LV2]
signal strength.
[MAN],
[PCH]
UNSAVE
Assign
~
or
~
buttons
to
seek
the
stations
one
by
one (manual
tuning)
or select a station
from
the
preset channels.
Store
the
information
about
the
song currently
being played
to
your
music list on Spotify.
Remove
the
song
information
stored in
[SAVE].
~~~~q~tlll
§~r:.ji~¥1
Connect a
Bluetooth
device in
the
list.
IPAfiQORAII
f\PP
liar
AUDtoiiANDROIDll
SPOTIFY
I
[1] (effective
for
low
compression
ratesL
[2] (effective
for
high
compression rates),
[OFF]
Enhance compressed audio and restore rich
sound.
Not
available when:
•
USB
is
selected
as
a source and
the
MIXTRAX
function
is
set
to
on.
• CO-DA/CD-TEXT
is
played back.
AUDIO
BOOK I iPod
[FASTER],
[NORMAL],
[SLOWER]
BOOKMARK
jPANOORAj
NEW STATION
IPAN(.)()a:lA.l
[FROM
TRACK],
[FROM
ARTIST]
PAUSE
I
APP
I
PLAY jsr
AUDIOj
STOP
lsrAUDIOI
A.\JDIO
.settings
MenuItem
FADER*1
BALANCE
EQ
SETTING
[SUPER
BASS],
[POWERFUL],
[NATURAL], [VOCAL], [CUSTOMl],
[CUSTOM2],
[FLAT]
Select an equalizer band and
level
for
further
customizing.
Equalizer band: [80HZ], [250HZ],
[800HZ], [2.5KHZ], [8KHZ]
Equalizer level: [+6]
to
[-6]
Change
the
playback speed. (Not available
when
[CONTROL
iPod]
is
selected in
the
control mode.)
Store
the
track
information
currently being
played in
your
Pandora account.
Create a
new
station based on
the
track or artist
currently
being
played.
Pause
or
resume playback.
Start playback.
Stop playback.
Description
Adjust
the
front
and rear speaker balance.
Adjust
the
left and
right
speaker balance.
Select
or
customize
the
equalizer curve.
[CUSTOM
1]
can be set separatelyfor each source.
However, each
of
the
below
combinations are set
to
the
same setting automatically.
• When
making
a
USB
connection, set
USB,
iPod,
PANDORA,
ANDROID,
SPOTIFY,
and
APP.
• When
making
a Bluetooth connection, set
BT
AUDIO,
PANDORA,
ANDROID,
SPOTIFY,
and
APP.
[CUSTOM2]
is
a shared setting used for all
sources.
m
:l
\2,
iii"
:l'
En
15
LOUDNESS
[OFF],
[LOW], [MID], [HI]
SUB.W*2
[NOR],
[REV],
[OFF]
SUB.W
CTRL
*2*3
Cut-offfrequency: [50HZ],
[63HZ], [80HZ],
[1OOHZ],
[125HZ],
[160HZ], [200HZ]
Output level: [-24]
to
[+6]
Slope level: [-12],
[-24]
BASS
BOOST
[0]
to
[+6]
HPF
SETTING
SLA
Cut-offfrequency:
[OFF],
[50HZ],
[63HZ], [80HZ],
[1OOHZ],
[125HZ],
[160HZ], [200HZ]
Slope level: [-12],
[-24]
[+4]
to
[-4]
Compensate
for
clear sound at
low
volume.
Select
the
subwoofer phase.
Only frequencies lower than those in
the
selected range are
output
from
the
subwoofer.
Select
the
bass
boost level.
Only frequencies higherthan
the
high-pass filter
(HPF)
cutoff
are
output
from
the
speakers.
Adjust the volume level
for
each source except
FM
.
Each
of
the
below
combinations are set
to
the
same setting automatically.
• When making a
USB
connection, set
USB,
iPod,
PANDORA,
ANDROID,
SPOTIFY,
and
APP.
• When making a Bluetooth connection, set
BT
AUDIO,
PANDORA,
ANDROID,
SPOTIFY,
and
APP.
*1
Not
available
when
[SUB.W/SUB.W]
is
selected in [SP-P/0 MODE] in
the
INITIAL settings (page
6).
*2
Not
available
when
[REAR/REAR]
is
selected in [SP-P/0 MODE] in
the
INITIAL settings (page
6)
.
*3
Not
available
when
[OFF]
is
selected in [SUB.W].
You
can also access
to
these
menus
when
the
unit
is
turned
off.
CLOCK
SET
Set the clock (page
5).
16
En
12H/24H
[12H], [24H]
AUX
[ON],
(OFF]
BTAUDIO
[ON],
[OFF]
SPOTIFY
[ON],
[OFF]
BTMEMCLEAR
[YES],
[NO]
PHONE
CONNECT
[IPHONE/IPOD], [ANDROID],
[OTHERS]
P.APP
AUTO
ON
[ON],
[OFF]
USB
AUTO
[ON],
[OFF]
Select
the
time
notation.
Set
to
[ON] when using
an
auxiliary device
connected
to
the
unit.
Set
the
Bluetooth signal on/off.
Set
to
[ON] when using the Spotify function.
Clear
the
Bluetooth device data (device list,
PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED]
appears when data
is
successfully
deleted.
Select the
type
of
device and
the
appropriate
connection
method
according
to
your
device.
See
page 16
for
details on
the
connections
for
each device.
• Select
[OTHERS]
when you connect a
mobile
device
other
than iPhone/
Android.
Select
[ON]
to
automatically launch Pioneer
ARC
APP
when
an
Android device
is
connected
to
the
unitvia
AOA.
(Not available when [MEMORY]/
[IPHONE/IPOD]/[WIRED]/[BLUETOOTH]
is
selected
in
[PHONE
CONNECT].)
Select [ON]
to
automatically switch
to
[USB]
source
when
a
USB
device/iPod
is
connected
to
the
unit.
Select
[OFF]
when
a
USB
device/iPod
is
being
connected
to
the
unit
just
for
charging.
Information on
the
connections for each device
The available sources
differ
depending
on
the
setting
value.
Please set [PHONE CONNECn
according
to
the
table
for
the
source
you
want
to
use.
For details on Pioneer
ARC
APP
connection,
see
page 14.
When
Pioneer
ARC
APP
connection
is
NOT
performed
[WIRED]
(When
[OTHERS]
is
selected)
[M
EMORY](MTP)
[APP
CONTROL](AOA)
[BLUETOOTH]
(When [ANDROID] or
[OTHERS]
is
selected)
Android
iOS
Android
iOS
USB
Bluetooth
Android
USB
Bluetooth
iOS
USB
Android
iOS
Bluetooth
Android
USB
Bluetooth
When
Pioneer
ARC
APP connection
is
performed
PANDORA,
APP,
SPOTIFY
USB
MTP
PANDORA,
APP,
SPOTIFY
[WIRED]
(When
[OTHERS]
is
selected)
[MEMORY](MTP)
[APP
CONTROL](AOA)
[BLUETOOTH]
(When [ANDROID] or
[OTHERS]
is
selected)
Android
iOS
Android
iOS
Android
iOS
Android
USB
Bluetooth
USB
Bluetooth
USB
Bluetooth
ANDROID
(Android
Music)
PANDORA,
ANDROID
(Android Music),
SPOTIFY
m
:I
'9.
iii"
:::r
En
17
··
lett~
••
•
•
I
•·
NATI
•
~
·
N
••••
••·
sitti
••
ngs
·······.
Menu Item Description
COLOR
(Not available
for
DEH-X3900BT/X391
OBT)
[KEY
COLOR],
[DISP
COLOR],
Select color for
the
keys/display
of
the
unit
from
[BOTH
COLOR]
12
preset colors,
[SCAN]
or [CUSTOM]*.
• [SCAN]: Cycle
through
a variety
of
colors
automatically.
• [CUSTOM]*:
1
Press
and
hold
the
M.C. dial
until
the
color
setting display appears.
2 Set
the
primary color
(R
(red)/G (green)/B
(blue)) and brightness level ([0]
to
[60]).
You
cannot select a level
below
10
for all three
of
R(red), G (green), B (blue) at the same time.
You
can also customize
the
preset colors. Select
one
of
the
preset colors, then press and hold
the
M.C.
dial until
the
color setting display appears.
*
The CUSTOM
setting
is
only
available
for
[KEY
COLOR]
and
[DISP COLOR].
DIM
SETTING
[SYNC
ILLUMI]*,
[SYNC
CLOCK],
[MANUAL]
*
Not
available
for
DEH-X3900BT/
X3910BT
BRIGHTNESS
(Only for DEH-X4900BT)
[KEY],
[DISP]
Change the display brightness.
Select
the
brightness
for
the
keys/display
of
the
unit
from
[1]
to
[1
0].
The available setting ranges
differ
depending
on
[DIM
SETTING].
BRIGHTNESS
(Only for DEH-X3900BT/X391
OBT)
[1]
to
[1
O]
Change
the
display brightness.
The available setting ranges differ
depending
on
[DIM
SETTING].
PHONE
COLOR
(Not available for DEH-X3900BT/X391
OBT)
[FLASHING] Select
the
key color
when
acall
is
received.
Applies
the
color set by
[KEY
COLOR].
[FLASH
FX1]
to
[FLASH
FX6]
Cycle
through
a variety
of
colors automatically.
[OFF]
No change in key color made.
18
En
ILLUMI
FX
(Not available for DEH-X3900BT/X3910Bn
[ON],
[OFF]
The
illumination
effect can be seen when:
-there
is
an
incoming
call
MIXTRAX
settings
SHORT
PLAYBCK
[1.0 MIN], [1.5 MIN], [2.0 MIN],
[2.5
MIN], [3.0 MIN],
[OFF]
-you
are on a
phone
call
-a
CD
is
inserted/ejected
The
illumination
effect will activate
when
the
ACC
power
is
turned
on/off
regardless
of
this
setting.
Select
the
length
of
the
playback time.
FLASH
AREA
(Not available
for
DEH-X3900BT/X391
OBT)
[KEY/DISPLAY],
[KEY],
[OFF]
Select
the
area for
the
illumination
effect.
When
[OFF]
is
selected,
the
color
set
under
the
ILLUMINATION settings (page 1
8)
is
used
as
the
display color.
FLASH
PATTERN
(Not available for DEH-X3900BT/X391
OBT)
[SOUND
LEVEL
1]
to
[SOUND
LEVEL
Change
the
illumination
effect according
to
6]
the
sound and
bass
level.
The flash pattern changes according
to
the
sound level.
[LOW
PASS
1]
to
[LOW
PASS
6] The flash
pattern
changes according
to
the
bass
level.
[RANDOMl]
[RANDOM2]
(RANDOM3]
The flash pattern changes
randomly
according
to
the
sound level
mode
and
low
pass
mode.
The flash pattern changes
randomly
according
to
the
sound level mode.
The flash pattern changes
randomly
according
to
the
low
pass
mode.
MIX
PATTERN (Only for DEH-X3900BT/X391
OBD
[SOUND
LEVEL]
Change
the
MIXTRAX
special effects according
to
the audio level.
[LOW
PASS]
[RANDOM]
OISPLAYFX
[ON],
[OFF]
CUTIN
FX
[ON],
[OFF]
The mix pattern changes according
to
the
sound level.
The mix pattern changes according
to
the
bass
level.
The mix pattern changes randomly according
to
the sound level mode and low
pass
mode.
Set
the
MIXTRAX
special effects on/off.
Turn the
MIXTRAX
sound effects
on/off
while
manually changing the tracks.
IConnections/Installation
A
wARNING
• When speaker
output
is
used by 4
channels,
use
speakers over
50
W
(maximum
input
power) and between 4
0
to
8 0 (impedance value).
Do
not
use
1
0
to
3 0 speakers for this unit.
• When rear speaker
output
is
used by 2 0
of
subwoofer,
use
speakers over
70
W
(maximum
input
power).
*Please refer
to
connections for a
connection method.
• The black cable
is
ground. When
installing this
unit
or power amp (sold
separately), make sure
to
connect the
ground wire first. Ensure that the ground
wire
is
properly connected
to
metal parts
of
the
car's
body. The ground wire
of
the
power amp and the one
of
this
unit
or
any other device must be connected
to
the
car separately with different screws. If
the
screw for the ground wire loosens or
falls out,
it
could result in fire, generation
of
smoke or malfunction.
Ground wire
POWER
AMP
L
~!V,tl
~cb
cb
\-
Other devices Metal parts
of
(Another electronic
car's
body
device
in
the
car)
*1
Not
supplied for this
unit
~~
Important
• When installing this unit in a vehicle
without
an
ACC
(accessory) position on
the ignition switch, failure
to
connect the
red cable
to
the terminal that detects
operation
of
the ignition key may result
in battery drain.
ACC
position
No
ACC
position
•
Use
this
unit
with
a 12-volt battery and
negative grounding only. Failure
to
do
so
may result in afire or malfunction.
•
To
prevent ashort-circuit, overheating
or
malfunction,
be
sure
to
follow the
directions below.
-Disconnect
the negative terminal
of
the
battery before installation.
-Secure the wiring with cable clamps or
adhesive tape. Wrap adhesive tape
around wiring
that
comes into contact
with
metal parts
to
protect the wiring.
-Placeall cables away from moving parts,
such
as
the shift lever and seat rails.
-Place all cables away from
hot
places,
such
as
near the heater outlet.
-Do
not
connect the yellow cable
to
the
battery by passing
it
through the hole
to
the engine compartment.
-Cover
any disconnected cable
connectors
with
insulating tape.
-Do
not
shorten any cables.
-Never
cut the insulation
of
the power
cable
of
this
unit
in order
to
share the
power
with
other devices.
The
current
capacity
of
the cable
is
limited.
-Use
afuse
of
the rating prescribed.
-Never
wire the negative speaker cable
directly
to
ground.
-Never
band together negative cables
of
multiple speakers.
• When this unit
is
on, control signals are
sent
through
the blue/white cable.
Connect this cable
to
the system remote
En
19
control
of
an external
power
amp
or
the
vehicle's
auto-antenna
relay
control
terminal
(max. 300m
A 12 V DC).
If
the
vehicle
is
equipped
with
a glass antenna,
connect
it
to
the
antenna
booster
power
supply
terminal.
• Never
connect
the
blue/white
cable
to
the
power
terminal
of
an external
power
amp. Also, never
connect
it
to
the
power
terminal
of
the
auto
antenna.
Doing
so
may result in
battery
drain
or
a
malfunction.
• The graphical symbol
===
placed
on
the
product
means
direct
current.
This
unit
Q)
Power cord
input
(I)
Microphone
input
®
Microphone
3m
(9ft.
10-1/8 in.)
@)
Rear
output
or
subwoofer
output
®
Front
output
®Antenna
input
(J)
Fuse
(1
0
A)
®Wired
remote
input
Hard-wired
remote
control
adapter
can
be
connected
(sold separately).
Power cord
Perform these connections
when
not
connecting
a rear speaker lead
to
a
subwoofer.
20En
II
@
m
G)
fc1f~~;.::
®-~~
~--
-(~)"~
---~
~
:
~
--
-~
~----
-
---
~-~
- -
-
f®·-
~
-@-··
~
-
~-@
~
----~~
:
~
N
*
~
~
q:p~-
M
~-
M - N
~-
~
~
~
0
~
~
~----
@
1------
@
1------
@
1------
@
...__
____
@
Perform these connections
when
using a
subwoofer
without
the
optional
amplifier.
@ ®
(f)
~---~
~
{
@
!~~
@
...__
___
~
@ @ 8
~Important
In
the
case
of
@)
above,
two
4 0
subwoofers wired in parallel
will
represent
a 2
0
load.
Q)
To
power
cord
input
@Left
@Right
@)
Front speaker
®
Rear
speaker
®
White
(J)
White/black
®Gray
®Gray/black
@Green
@ Green/black
@Violet
@Violet/black
([4)
Black (chassis
ground)
Connect
to
a clean, paint-free metal
location.
Q5)
Yellow
Connect
to
the
constant
12
V
supply
terminal.
@
Red
Connect
to
terminal
controlled
by
the
ignition
switch (12 V
DC).
@Blue/white
Connect
to
the
system
control
terminal
of
the
power
amp
or
auto-antenna
relay
control
terminal
(max. 300
mA
12
V
DC).
@
Subwoofer
(4
0)
@)
When using a
subwoofer
of
2
0,
be sure
to
connect
the
subwoofer
to
the
violet
and
violet/black
leads
of
this unit.
Do
not
connect
anything
to
the
green and
green/black
leads.
®
Not
used.
@
Subwoofer
(4
0)
x 2
@
Orange/white
(Not available
for
DEH-
X3900BT/X391
OBT)
Connect
to
a car's
illumination
signal.
Power amp (sold separately)
Perform these
connections
when
using
the
optional
amplifier.
G)
~-
~__.
I
®
®
8 8
G)
~~
~~~
ttl ttl
®
(j)
(J)
8 8
Q)
System
remote
control
Connect
to
blue/white
cable.
(I)Power
amp
(sold separately)
®Connect
with
RCA
cables (sold
separately)
@)
To
front
output
®Front speaker
®
To
rear
output
or
subwoofer
output
(J)
Rear speaker
or
subwoofer
Installation
c!}=
Important
• Check all connectionsand systems before
final installation.
• Do
not
use
unauthorized
parts
as
this
may cause
malfunctions
.
• Consult
your
dealer
if
installation requires
drilling
of
holes
or
other
modifications
to
the
vehicle.
• Do
not
install this
unit
where:
-it
may interfere
with
operation
of
the
vehicle.
-it
may cause
injury
to
a passenger
as
a
result
of
a sudden stop.
• The
semiconductor
laser
will
be
damaged
ifit
overheats. Install this
unit
away
from
hot
places such
as
near
the
heater
outlet.
•
Optimum
performance
is
obtained
when
the
unit
is
installed
at
an angle
of
less
than 60°.
• When installing,
to
ensure
proper
heat
dispersal
when
using this unit, make sure
you leave
ample
space
behind
the
rear
panel and
wrap
any loose cables
so
they
are
not
blocking
the
vents.
Leave
ample
space
DIN
mount
installation
1
Insert
the
supplied mounting sleeve
into
the
dashboard.
Other manuals for DEH-X4900BT
1
This manual suits for next models
3
Table of contents
Other Pioneer Car Receiver manuals
Pioneer
Pioneer DEH-3200UB User manual
Pioneer
Pioneer Super Tuner IIID DEH-P680MP User manual
Pioneer
Pioneer DEH-P6400 User manual
Pioneer
Pioneer KEH-M9300RDS User manual
Pioneer
Pioneer MVH-X370BT User manual
Pioneer
Pioneer KEH-P1010 User manual
Pioneer
Pioneer KEH-P601 User manual
Pioneer
Pioneer DEH-P4690MP User manual
Pioneer
Pioneer DEH-P4100SD User manual
Pioneer
Pioneer DEH-P9400MP User manual
Pioneer
Pioneer KEH-P6005 User manual
Pioneer
Pioneer Super Tuner III D DEH-P2550 User manual
Pioneer
Pioneer KEH-P1015 User manual
Pioneer
Pioneer AVH-P2300DVD User manual
Pioneer
Pioneer DEH-S1010UB User manual
Pioneer
Pioneer CDX-MG6047ZH User manual
Pioneer
Pioneer AVM-P7000R User manual
Pioneer
Pioneer DEH-1700 User manual
Pioneer
Pioneer AVH-270BT User manual
Pioneer
Pioneer FH-P5000MP User manual
