Pioneer PRV-9200 User manual

ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
RRV3055
T – ZZV NOV. 2004 Printed in Japan
DVD RECORDER
PRV-9200
CONTENTS
1. CONTRAST OF MISCELLANEOUS PARTS ............ 2
2. MODEL TYPE SETTING .......................................... 4
This service manual should be used together with the following manual(s):
RemarksOrder No.
DVR-520H-S/KU/CA
RRV2963
Model
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power Requirement Region No. Remarks
PRV-9200 KU/CA AC120V 1

2
1234
1234
C
D
F
A
B
E
PRV-9200
PCB ASSEMBLIES
P11- 3 MAIN ASSY VWV2025 VWV2076
P11- 8 POWER SUPPLY UNIT VWR1380 VWR1386*1*1: 3 core Inlet type of VWR1380
Others are constructed same.
PACKING
P 9- 1 >Power Cable ADG7021 DDG1071
P 9- 3 RF Antenna Cable VDE1025 VDE1088
P 9- 7 Operating Instructions (English) VRB1338 VRB1354
P 9-11 NSP Card VRY1132 Not used
P 9-12 NSP Warranty Card ARY7045 DRY1210
P 9-18 Packing Case VHG2545 VHG2584
Paper Board Not used VHC1136
EXTERIOR SECTION
P11-10 HDD 80G 4R080L0 SV VXF1010 Not used
P11-10 HDD 160G 4R160L0 SV Not used VXF1028
P11-47 NSP Chassis Assy VXA2682 VXA2700
P11-51 Tray Panel VNK5421 VNK5671
P11-52 Bonnet Label VRW2104 VRW2160
P11-54 Rear Panel VNA2704 Not used
P11-54 NSP Rear Panel Not used VNA2768
P11-55 Bonnet Case VXX2925 Not used
P11-55 NSP Bonnet Case Not used VNA2769
P11-59 Screw PBZ30P080FTC Not used
P11-62 Screw BCZ40P060FNI BCZ40P060FZK*2*2: for Bonnet
Screw Not used PMB40P080FMC*3*3: for Cord Stopper
Screw Not used PMH30P080FMC*4*4: for AC Inlet
Cord Clamper Not used RNH-184-0
FRONT PANEL SECTION
P14- 5 Front Panel Assy VXA2645 VXA2701
P14- 9 NSP Main Key VNK5420 VNK5666
P14-11 NSP Sub Panel VNK5483 VNK5669
P14-12 NSP Power Key VNK5480 VNK5690
P14-13 NSP IR Window VNK5423 VNK5446
P14-14 NSP DV Cover VNK5451 VNK5668
P14-15 NSP FL Lens VNK5422 VNK5672
P14-16 NSP Front Panel VNK5441 VNK5667
P14-17 Jack Door VNK5494 VNK5670
P14-21 NSP Copy Ring VNK5523 Not used
1. CONTRAST OF MISCELLANEOUS PARTS
jpfy
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
Reference Nos. indicate the pages and Nos. in the service manual for the base model.
NOTES:
•When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω→56 × 101→561 ........................................................ RD1/4PU
5 6
1J
47k Ω→47 × 103→473 ........................................................ RD1/4PU 47
3
J
0.5 Ω→R50 ..................................................................................... RN2H
R 5
0K
1 Ω→1R0 ..................................................................................... RS1P 1
R 0
K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω→ 562 × 101→5621 ...................................................... RN1/4PC
5 6
2
1
F
7CONTRAST TABLE
PRV-9200/KU/CA and DVR-520H-S/KU/CA are constructed the same except for the following:
Ref.
No. Remarks
DVR-520H-S/KU/CA PRV-9200/KU/CA
Part No.
Mark Symbol and Description
• For PCB assemblies, Refer to “CONTRAST OF PCB ASSEMBLIES”.
>

3
1234
1234
C
D
F
A
B
E
PRV-9200
MAIN ASSY
F
C
VWV2076 and VWV2025 are constructed the same except for the following :
CONTRAST OF PCB ASSEMBLIES
IC1102 (FLASH ROM) VYW2176 VYW2272
Mark Symbol and Description Part No.
VWV2025 VWV2076 Remarks

4
1234
1234
C
D
F
A
B
E
PRV-9200
• The Setup is Necessary When :
a) When the MAIN Assy is replaced
b) When the JCKB Assy is replaced
c) When the MAIN Assy and JCKB Assy are replaced Note : Make sure of setting the correct number.
• How to Setup the Model
1) After power on, the following screen is displayed on TV monitor.
Press " 27 " by using the remote control unit for service(GGF1381).
2) After 1), the following screen is displayed on TV monitor.
Press " 011 " by using the remote control unit for service.
6) Escape the Service Mode. Press [ESC].
7) Download the latest firmware.
At last, the download is necessary to update the firmware of each ASSY.
Refer to "7.1.3 DOWNLOAD METHOD" of RRV2963 on page 77.
Notes :
1) After the setting complete, you can NOT CLEAR the setting data.
Make sure the pressing number.
2) " NG " is appeared on TV when unsuitable number is pressed.
In such a case, please unplug the power cable and plug it again. Then restart the model setting.
The setting complete when OSD is disappeared.
3) Unplug the power cable.
4) Reset the recorder to all its factory settings.
1. Make sure that the recorder is on.
2. Press and hold [STOP] and press [STANDBY/ON] key on the front panel.
The recorder turns off with all settings reset.
5) Enter the Service Mode and then confirm the Model Name " PRV-9200/KU/CA ".
1. Make sure that the recorder is on.
2. Press [ESC] then [DISP] keys by using the remote control unit for Service.
[ Recorder 's Model Setting]
Input the number by using the remote for Service.
> --
Input No. Model
[ 27 : PRV-9200 ]
[ Recorder 's Type Setting]
Input the number by using the remote for Service.
> --- (Type -- , Region No. -)
Input No. Type
[ 01 : KU/CA <US> ]
PRV-9200/KU/CA
VERSION : 1.∗ ∗
SYSCON : RELEASE_154
Rev :1.5102.2.3 $
TUFLCON : 1.22 MASK OK
DRIVE : DVD-RW DVR-107X OK
1.16E OK
CKT0000353WL OK
HDD : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ (*1) 160
DEVICE : PRISM-PLUS
REGION : 1
C:∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
FLASH : 64M
(*1) : HDD part No. depends on the models.
2. MODEL TYPE SETTING