Pioneer Pure Vision PDP-425CMX User manual

PIONEER CORPORATION
1-4-1, Meguro, Meguro-ku, Tokyo 153-8654, Japan TEL: [phone] FAX: [phone] http://www.pioneer.co.jp/
PIONEER ELECTRONICS (USA) INC.
2265 East 220th Street, Long Beach, CA 90810, USA TEL : [phone] FAX : 310- 952 - 2639
http://www.pioneerelectronics.com/ http://www.pioneerindustrialav.com
3147E AD-FC(F)01-06 Printed in Japan
Pioneer Corporation and Pioneer Display Products
Corporation where PDP products are developed have
both achieved ISO 14001 certification.
Printed on Recycled Paper
Dimensions
Terminal Configuration
Specifications
Input/Output Terminals
Audio Input/Output Terminals
Control Terminals
Computer Input Signal
Accessories
*Apple Macintosh is a registered trademark of Apple Computer, Inc. *IBM PC/AT is a registered trademark of IBM Corporation. *Microsoft is a registered trademark of Microsoft Corporation.
*VESA is a registered trademark of Video Electronics Standards Association.
• Specifications and design subject to modification without notice. • This equipment is sold on the condition it will be installed by a competent professional engineer with sufficient training and skill to carry
out its proper installation. Be sure to entrust the installation and set-up of this machine only to a competent professional or retail service engineer. Pioneer cannot accept liability for damage due to
inappropriate installation location or improper handling, assembly, installation, set-up, operation or retrofitting. • Plasma Display Systems display images consisting of hundreds of thousands of minute pixels
(light emitting cells), and there is a possibility of inactive, flashing or continually illuminated pixels. • Plasma Display Systems emit slight amounts of IR (Infrared Emission) through luminous discharge
technology. IR is not harmful to living organisms, but may interfere with the operation of remote controls for other equipment or cause static in equipment using IR (such as cordless headphones or cordless
microphones) • Image retention, also known as burn-in, can occur in all phosphor-based display systems (including CRT television systems—both direct view and projection—as well as plasma display
systems). Displaying the same still images for long periods should be avoided as image shadowing or burn-in may occur. Recommended guidelines are as follows: • Do not display static images for long
periods (such as still images, fixed images from PC or TV game equipment, and/or fixed images such as time of day indicator or channel logo display). • Do not display content in the 4:3 aspect ratio (black
or gray bars on left and right side of content) or letter-box content (black bars above and below of content) for extended periods of time, or use either of these viewing modes repeatedly within a short period
of time.This Plasma Display System is equipped with multiple wide-screen viewing modes; use one of these screen modes to fill the entire screen with content. • Displaying dark images after displaying
still images for a period of time may cause image retention. In most cases, the image retention can be corrected by displaying bright images for a similar period of time. If you display still images on
your Plasma Display System for long periods of time, image retention may be irreparable. • Plasma Display Systems may have a negative effect on sound or images coming from AM radios, PCs or
video-related products. • Plasma Display Systems have interior glass panels; be sure to secure it from damage from impact. • While in use, Plasma Display Systems may generate some functional
sounds, for example: fan motor noise, and electrical circuit humming/glass panel buzzing. • PIONEER, the Pioneer Logo, and PureVision are registered trademarks of Pioneer Corporation.
Power Code x 1, Remote Control Unit x 1, AA batteries x 2, Wiping Cloth x1, Speed Clamps x 5, Display Stands x 2,
Washers x 2, Hex Hole Bolts (M8x40) x 2, Remote Control Unit Holder x 1, Ferrite Core (for Power Code) x 2,
Ferrite Core (for Audio Cable) x 3, Cable Bands x 2, User's Manual x1, Warranty x1
Unit: inch (mm)
40-1/4 (1022)
24-1/32 (610)
20-9/32 (515.3)
(SCREEN AREA)
36-9/32 (921.6) (SCREEN AREA) 3-27/32 (98) 19-17/32 (496)
20-7/8 (530)
5-29/32
(150)
5-29/32
(150)
5-1/8 (130) 4-31/32 (126)
4-31/32 (126)

1
1991 1992 1993 1994 1995 1996 1997 1998
•Pioneer begins
research and
development
of PDP
•Pioneer announces
prototype of
AC Type 40" PDP
(4:3 VGA)
•Pioneer announces
working AC Type
40" PDP (4:3, VGA)
•Pioneer releases AC Type
40" PDP (PDP-V401)
•Pioneer releases PDP-501MX
(16:9, wide XGA—two industry firsts
(worldwide) = 50" & XGA panel)
•Pioneer introduces first high-definition
flat panel
•Pioneer introduces first 50” WXGA model
•Pioneer releases
40" VGA (PDP-V400)
for industrial monitor
Industrial Plasma Timeline
PDP-501MX
2
*Compatible with Microsoft Plug & Play (VESA DDC 1/2B)
Pioneer’s plasma displays were the industry’s first to receive Microsoft’s Windows®Hardware Qualification Labs (WHQL) certification of compliance.
The PDP-425CMX continues this tradition by providing Plug & Play drivers to support Microsoft ®Windows and other operating systems.
1999 2000 2001 2002 2003 2004
•Pioneer releases PDP-502MX
(16:9 Wide XGA) that has
Encased Cell Structure
(industry first), Advanced
Continuous Emission
(industry first)
•Pioneer introduces first flat panel
with Deep Encased Cell Structure
•Pioneer provides first expansion
slot for PDP
•Pioneer introduces
first WHQL-certified PDP monitor
•Pioneer introduces first PDP
with over one billion colors
•Pioneer introduces first PDP
43" XGA model
PDP-504CMX
PDP-434CMX
PDP-503CMXPDP-502MX
PDP-433CMX

Comparison of Old and New Cell Structure
PURE BLACK PANEL
PURE BLACK PANEL
PDP image quality takes another impressive step forward with Pioneer’s
new Pure Black Panel. In addition to our exclusive Deep Encased Cell
Structure, it uses another breakthrough technology called Crystal
Emissive Layer to achieve luminous efficiency that is much higher than
the previous model. The result is unprecedented high brightness of
1,400cd/m2(peak/panel) and greatly improved dark-area contrast.
Blacks are blacker, while light areas maintain their true brightness
values. Bright-area contrast is also significantly higher, meaning
that the PDP-425CMX will provide conspicuous, effective displays
in bright places such as shopping malls, event venues and showrooms.
1,400cd/m2brightness
allows effective displays
even in bright stores.
Thanks to the extremely high contrast,
during meetings even small text
on the screen is clearly visible.
3
Achieves the dual goals of higher brightness and greater contrast.
Old Cell Structure New Cell Structure
Greater Light Volume
Front Glass Substrate
Rear Glass Substrate
Ultraviolet Rays
Deep Encased Cell Structure
Plasma Discharge
Protective Layer
Crystal Emissive Layer
Deep Encased
Cell Structure
Transparent
Electrode
Dielectric Layer
Front Glass Substrate
Protective Layer
Phosphor (Green)
Phosphor (Blue)
Phosphor (Red)
Crystal Emissive Layer
Auxiliary Electrode
Address Protective
Layer
Rear Glass Substrate
Address Electrode
Black Stripe
NEW PURE DRIVE PRO
Further enhanced
reproduction in
the low brightness
range
New ACE IV (Advanced Continuous Emission IV)
Previous Model
PDP-425CMX
High efficiency and the best possible picture quality have been achieved by mounting the color
management, scaling, GUI mix and other image processing technologies on a single chip that we
developed exclusively for our professional monitors. Scaling performance, a vital factor for professional
monitors, has been improved to ensure that even high resolution signals are reproduced with minimal
data loss. In addition, ACE IV technology enables the panel to accurately reproduce high level gray
scale for each color. The panel instantly identifies the type of image being shown (fast- vs. slow-motion
scenes, dark vs. light scenes) and dynamically optimizes the distribution of color gradation.
4
Superior scaling performance
Even when the image is expanded by video wall or point zoom
functions, the PDP-425CMX displays detailed information
with extreme clarity.
Superb picture quality designed for professional applications.
PDP-425CMXOrdinary
Brightness level
Brightness level
Masaaki Nishio
Engineering Department 3, PDP Product Engineering Division, Home Entertainment Business Group, PIONEER CORPORATION
General Manager

5 6
Image moves in extremely small steps, so viewers
do not notice that it is changing.
Remote control operation permits the use of Picture-in-Picture (P-in-P)
and Side-by-Side modes. With P-in-P you can shift the position of
the sub-image among four locations. Side-by-Side switches between
the left and right images, and in addition to the swap function, you can
also switch the audio via remote control.
Video Wall can display up to 25 images.
Pioneer’s industry-first Seamless Orbiter alleviates burn-in
Upgraded Side-by-Side mode
Select four sub-image sizes
and the visual mode.
Standard Dual Screen Mode
PIONEER PDP Features
Dual Screen Function: Upgraded for professional use.
The P-in-P mode permits a number of display variations.You can select
four sizes of P-in-P sub-images and you can set the transparency of
the sub-image from 0 to 80%. You can switch easily between Side-by-Side and P-out-P modes with
the Integrator Menu. It is also possible to select three horizontal aspect
ratios for dual image, full screen display.
Power On Delay
This function automatically varies the powering up of each display to reduce
the load on the power source.
ABL Link
The ABL (Auto Brightness Limiter) Link function sets the brightness of each
display at a uniform level (operates only with 2x2 and 3x3 configurations).
Auto ID Setting
Automatically sets an ID for each display connected via a combination
control cable to permit simpler error-free setting (operates only with 2x2
and 3x3 configurations).
Repeat Timer
Seamless Orbiter mode
The entire image moves one dot at a time.
The movement is easily noticeable.
Conventional orbiter modes
This function allows the repetition of two settings. For example, you can set
the timer to display a video image on the full screen for three minutes, then
a PC image divided into four screens for six minutes. This is continuously
repeated (operates only with 2x2 and 3x3 configurations).
Banner PIP mode displays on-screen titles
Intelligent Dual Screen Mode
3x3
5x5
The new Pure Drive Pro image processing engine greatly improves processing of not only the main image, but also
the sub-image in dual image mode. As a result, a variety of dual-image displays not previously possible can now be
shown, allowing presentations and product promotions that are impressive and persuasive.
Pioneer makes it easy to configure multi-monitor video walls. Possible configurations are 2x2, 3x3, 4x4 and 5x5. Two display modes are
provided: Normal, for showing data and text, enlarges the image so that no elements are hidden by bezels, while Adjusted, for pictures
and video, enlarges the image as a single whole unit, as though looking through a window. Video Wall functions include Power On Delay,
ABL Link, Auto ID Setting and Repeat Timer. Video Wall is an internal function, not needing external processing equipment.
Conventional orbiter modes reduce ghosting by moving the displayed image by one pixel at regular intervals. Because viewers
can notice the movement, it interferes with their viewing. The PDP-425CMX has an improved Seamless Orbiter function,
which moves the entire image in extremely small steps of less than a pixel. The most effective orbiting pattern was adopted
based on a variety of simulations, achieving the maximum possible mitigation of ghosting without viewers noticing the process.
You can easily display titles prepared in PowerPoint®presentation software
or other programs on the screen. You can choose four positions for
the titles: top, medium top, medium bottom, and bottom. The transparency
of the on-screen titles can also be varied.
Sub-Image Detection
If the sub-image input signal is lost during P-in-P display, this mode shuts
off, and is automatically selected again when the signal is restored (operates
only with P-in-P mode).
Side-by-Side
Picture-out-Picture
Tomohisa Fujita
Designing Section 1, Engineering Department 3, PDP Product Engineering Division, Home Entertainment Business Group, PIONEER CORPORATION
Senior Assistant Manager
* PowerPoint is a registered trademark of Microsoft Corporation.
The transparency of the on-screen titles
can also be varied.
PDP-425CMXOrdinary
Normal modeAdjusted mode

7
Options
BNC Connector Interface Card
PDA-5003
RCA Connector Interface Card
PDA-5004
Expandability to Meet a Wide Variety of Present and
Future Needs — ES* Card Slot Interface * Expansion Solutions
The PDP-425CMX is designed to be ready for any type of application with
the integration of two ES Card Slot interfaces, one for communication and
one for enhanced data. It comes supplied with a removable communication
card that includes RS-232C and combination I/O interfaces. The second
slot may optionally be used to enable video capabilities through the input of
a wide range of analog or digital signals, with additional control. This means
that one PDP-425CMX can be used for multiple tasks, including various
applications that other PDPs can’t handle. You have extensive flexibility
right out of the box, and it is also ready for additional needs that may arise
in the future. Pioneer’s “Expansion Solutions” are one more reason why
the PDP-425CMX should be your first choice for a professional plasma display.
You can take advantage of
a convenient weekly timer and
seven programmable functions
including power on/off, input
selection, and activation of
image burn-in reduction modes.
Frozen image Current image Current image
• Serial number information
• Product model name
• Hour meter
• Interior temperature information
• Power on/off information
• Input signal information
• Cause of error
When a command is transmitted from a control device to the PDP via
the RS-232C interface, the PDP returns its status. This not only permits
remote confirmation of current PDP status, it can also specify the cause of
errors, should they occur, speeding up service response. The PDP-425CMX
provides high control capacity: combination connections, variable baud rate
setting, acknowledge function and more.
The PDP-425CMX has a high performance dual image processing function that
switches from one input image to another at the high speed of approximately
0.4 seconds. This ensures smooth, comfortable viewing of displays at exhibition
halls or event venues and presentations in offices.
High speed image switching for smooth
displays and presentations
Image Freeze temporarily freezes a displayed image. The still image can be
the sub-image in P-in-P mode or the left-side image in Side-by-Side mode.
You will find this function to be convenient during presentations or meetings.
Dual Image Freeze displays stills of new images as small images
Programmable Timer allows control of designated functions
according to a schedule
RS-232C status feedback
PIONEER PDP Features
Communication Slot Video Slot
Communication Slot Video Slot
Frozen image
8
• Large GUI Display • Frame Rate Conversion mode • Display Call
• Point Zoom • Intelligent Auto Setup • Color Detail Adjustment
• Smart Cooling System • Vertical and Left to Right Reversal Modes
• Priority Input Mode • Layered Key Lock
• Retake Specialized Color Temperature Switching Function
• OSD Off • LED Off • Memory Lock
Low power consumption and four energy saver modes
Other Features
This PDP-425CMX achieves the industry’s lowest power consumption of 285W
thanks to the high light emission efficiency of the new Pure Black Panel.
Four energy saver modes contribute to further low power consumption:
Power Save, Intermediate,
Linear Brightness, which
decreases the peak intensity
of high-brightness images,
and Auto Brightness Control,
which automatically adjusts
panel brightness depending
upon room lighting.
IP Link Interface Module
TM
TM
Extron Electronics
IPL M PDP-ES
Integrated Analog CAT-5 Receiver
Magenta Research
MultiView AK1000PDP
HDSDI Digital Video Interface
Alcorn McBride
PDP HDSDI
This compact ethernet control card enables
IP-based remote control, proactive monitoring,
and troubleshooting.
Enables high resolution video distribution over
CAT-5/UTP. Signals can be transmitted over
longer distances.
Allows the PDP to connect directly to professional
quality broadcast equipment or any other device
with SMPTE-292M and SMPTE-259M output
capability.
TM
®
Pioneer Certified Third Party Expansion Solution Cards*
*Third party Expansion Solutions cards are not Pioneer products and are subject to each manufacturer’s own warranty.
• Under-Scan: Displays input video signals without modification.
• Color-Off: Removes color information for optimum display of black and
white signals.
• Still Image Processing: Suppresses movement to display still images
accurately by varying movement detection processing.
• Pure Image: Displays images as close as possible to the original signal
with no image processing except I/P conversion.
• High Contrast mode: Uses special dynamic range expansion to make
images more vivid.
Five Pro modes allow image adjustment for
professional applications
• Side mask brightness adjustment: Adjusts side mask brightness during
4:3 image display.
• White signal display: Displays white over the entire screen. This restores
ghosted locations to their former condition.
• Screen reversal display: Restores ghosting by reversing the colors of
the area where ghosting occurs.
• Soft focus: Blurs the edges of the image, making ghosting difficult to see.
Numerous image burn-in alleviation modes
Joshua Kairoff
Director
Display Product Planning, Home Entertainment Division
PIONEER ELECTRONICS (USA) INC.

PCA-1
1-1/2" NTP (SINGLE)
CEILING ADAPTER
PSA-1
ADJUSTABLE HEIGHT
SUSPENSION ADAPTER
Optional Side-Mount Speakers
Maximum input 30W/6 ohms
Dimensions (WxHxD)
3-17/32" x 24-1/32" x 3-23/32" (90 x 610 x 94.4 mm)
Weight 4 lbs. 3 oz (1.9 kg)(one unit)
PDP-S44-LR
Tabletop Stand
PDK-TS01
Dimensions (WxHxD)
22-9/32" x 20" x 13-11/32" (566 x 508 x 339 mm)
Weight 8 lbs. 13 oz (4.0 kg)
9
Options
PIONEER PDP Applications
Pioneer Plasma Displays provide countless ways to maximize your investment and
gain attention. They are ideal for a wide variety of professional applications and
are quickly becoming the de facto standard for other companies to follow.
Pioneer’s superior brightness, sharpness and color accuracy make our plasmas the perfect
fit for many well-lit environments found in most professional type installations.
Whether you are choosing a plasma display for a lobby, conference room,
point of information or public display, trust the leader
in plasma technology and choose Pioneer.
Pioneer Plasma Displays fit seamlessly and elegantly into corporate offices. They can
be used in lobbies, conference rooms, common office areas or even open meeting
areas and are highly effective tools in business.
Electronic advertising, promotions or up to date product
information can be easily displayed and read bycustomers
on a Pioneer Plasma Display in retail environments.
PCA-2
2" NTP (DUAL)
CEILING ADAPTER
PWM-F110
UNIVERSAL
WALL MOUNT
BRACKET
PSA-2
ADJUSTABLE HEIGHT
SUSPENSION ADAPTER
PDWB -5003
FLAT WALL MOUNTING
BRACKET
PWM -503
TILTING WALL MOUNTING
BRACKET
*These products are offered for sale only in the US market and may not be suitable for use in other regions. The products are not Pioneer products and are subject to the manufacturer’s own warranty.
*These items have been produced by Progressive Marketing Products, Inc. If you need further information please call 1-800-368-9700 or access to http://www.pmpi.com.
10
Pioneer Plasma Displays can be used in control room type applications
where space is a premium. Important information can be easily read
and monitored with wide viewing angles and bright, sharp images.
Public information displays are gaining popularity using Pioneer Plasmas.
High visibility combined with leading-edge Pioneer Plasma technology,
make this venue a perfect fit. Get their attention, convey your message
and make an impression, all with the help of Pioneer Plasma Displays.