Piot E100S User manual

pi027-manual-E100S(100pcs)-issue1
6-7-2017
Andy
E100S Manual
297x210
File Name:
Type of Artwork:
Packaging Materials:
Packaging Size(WxHxD mm):
Date:
Designer:
Die Cut
Crease
Piot Technology Limited
5
ENERGY MONITORING
To save energy, user can monitor the power consumption
of the electrical appliance.
With the tariff rate setting, the energy cost can be
calculated automatically. User can analysis the power
consumption of their electrical appliance with graphical
view.
SCHEDULE TIMER
COUNTDOWN TIMER
RANDOM TIMER
OVERLOAD WARNING and PROTECTION
Schedule timer can be set by the App to turn the electrical
appliance ON/OFF at desired time.
Countdown timer can be set by the App to turn the
electrical appliance ON/OFF when programmed time
elapsed.
This function is designed to be used when user is away
from home and can be controlled by App. When random
timer is enabled, lighting fixture will turn ON/OFF randomly.
Over power limit can be programmed by the App and user
can select either cut off power supply and/or buzzer alert
when the measured wattage is higher than the
programmed value.
7) Opening the device, service and repair work must only be
carried out by a trained device person who is familiar with
the relevant regulations.
8) To avoid any hazard or misuse, please use this product only
as described in user manual.
9) Do not operate this product in wet or damp conditions, to
avoid electric shock.
10) Comply with the warning labels and other information on
the equipment.
11) Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
12) Do not subject the equipment to shocks or strong
vibrations.
13) Do not operate the equipment near strong magnetic fields
(motors, transformers etc.)
14) Do not store the smart socket in a place of explosive,
inflammable substances.
15) Do not modify the device in any way
16) The guarantee become invalid in the event of damage
resulting from non-observance or improper use of the user
manual.
E100S
Bluetooth Smart Socket
with Energy Meter
USER MANUAL
ENGLISH INTRODUCTION
Thank you for purchasing our Bluetooth Smart Socket with
Energy Meter E100S. It supports any iOS and Android devices
with Bluetooth equipped. We strongly recommend to read this
User Manual before you operate the product.
ABOUT Bluetooth Smart Outlet
E100S is a Bluetooth Smart Outlet which can seamlessly
control lighting fixtures and electric appliances. It can monitor
the energy usage. With the mobile App, user can monitor the
energy usage and control the socket at desired condition. User
can program the socket to turn on/off at desired time schedule
or at desired power level.
BOX CONTENTS
1) Smart Socket
2) User manual
On/Off
LED indicator
GETTING STARTED
REMOTE CONTROL
User can turn the output of smart socket ON/OFF by the App.
To obtain better performance, user must ensure that the smart
socket is located within the coverage of Bluetooth signal with
your mobile phone. The receiving distance will be affected by
obstacles and building materials.
LED INDICATOR
This smart socket has equipped with LED indicator to indicate
the device status (see below).
LED colour
OFF
Blue ON
Red ON
Purple Flash
Status
Output OFF
Output On
Pairing
Alert
LOW POWER STANDBY
Low power cutoff limit can be programmed by App when the
output power is lower than the programmed value, the device
will disable the output power.
from this device.
SAFETY INSTRUCTIONS
To ensure safe operation of the device and eliminate the
danger of serious injury due to short-circuits, the following
safety precautions must be observed.
1) Do not connect E100S to another E100S.
2) Indoor use only.
3) Keep children and pets away
4) Inspect periodically.
5) The unauthorized rebuilding and/or modifying of the device
is not permitted.
6) If you are not sure about the operation, safety or the
connection of the device, contact expert.
Plug the Smart Socket to power outlet any
electrical appliance connected.
Download and install our free app “PiEnergy” from iOS
App Store for iPhone or Google Play Store for Android
phone.
WITHOUT
PiEnergy
Enable Bluetooth on mobile phone.
Click "Devices" in App and click symbol + in New
Devices Scanned list, “Device Pairing”message pop up.
Please hold the button of the Socket in 3 seconds.
When the Socket is paired successfully, App jump to
'Device Profile' page automatically. Click “Save”to register
the Device.
Free app for iOS and Android
SPECIFICATIONS
Power Supply
Rating
Operating Temperature
Operation Range
: 120VAC
: max 15A, 1800W
: 5 to 35°C
: up to 30 meters
Made in China
Any unused smart socket must be disposed of
according to the local EPA regulations at the
end of their service life.
Distributed by:
email support:
toll-free support no.:
www.piottech.com
iPhone and iPad are the registered trademarks of Apple Inc.
Android is a trademark of Google Inc.
PIOT Technology Limited.
[email protected]
(1) 510-489-9625