Pippy Play Designs Large Table User manual

Large Table - Instruction manual
Large Table
Instruction Manual
Included in the box for assembly
- 1 x top tub holder piece
- 1 x bottom shelf piece
- 4 x legs
- 16 x screws already pre-drilled
You will need
Drill (recommended) OR a Phillips head screwdriver
Step 1
- Start with the ‘bottom shelf piece’ and the 4 legs
Step 2
Note: The screws are already pre-drilled for your
convenience.
- If using a drill ensure it is on the slow setting and drill in
the 4 screws on each leg until they are just poking out the
other side - this will help you line up with the pre-existing
holes on the table.
Step 3
Attaching the legs
- Lay the ‘bottom shelf piece’ on its side.
Legs
‘Top tub holder piece’
‘Bottom shelf piece’
- Grab the leg with the #1 on it and line the sticker up with
the #1 on the ‘bottom shelf piece’, also lining the screws
up with the pre drilled holes.
(Example pictured left)
- If using a drill ensure it is on the slow setting and slowly
drill in the 2 screws.
- Repeat this step for all 4 legs (flip the ‘bottom shelf
piece’ over after you have put on the first 2 legs)
MAKE SURE ALL THE NUMBERS LINE UP

Large Table - Instruction manual
Step 4
- Lay the table on its side and slide in the ‘top piece’
in order to be able to drill downwards.
Make sure all the numbers line up!
COMPLETE!
Just place your tubs into the table
If you are having any troubles please contact us.
We are more than happy to help.
Thank you for supporting our small business!
Emma & Myles
(Pictured) Table with all 4 legs connected to
the ‘bottom shelf piece’ .
- Now that the ‘top tub holder piece’ is sitting between all
of the legs.
- Line the numbered sticker up with the number on the
leg, also lining the screws up with the pre drilled holes.
(Example pictured left)
- Slowly drill in both screws.
- Repeat this step for all 4 legs (flip the table over after you
have put on the first 2 legs)