Pivot FAIBBS101 User manual

1
BASKETBALL SYSTEM
Product Code: FAIBBS101
Please read all warnings and cautions before assembly. It is recomend to supervise children as
they play with this product. This product is to be assembled by 2 adults only.

2
IMPORTANT SAFETY INSTRUCTIONS 4
EXPLODED DIAGRAM 5
ASSEMBLY INSTRUCTIONS 6 - 7
CONTENTPAGE

3
Step 1
Visit our Website
Go to the GPI Sports website:
Warranty Registration Form
Step 2
Enter Purchase Information
Enter all purchase information including the model number, serial
number and proof of purchase which can be uploaded from this page
Step 3
Contact Our Service Department
If a warranty service request is required on your product please email
servic[email protected]om.au or call the toll free number - 1800 005 770
Congratulations on purchasing your product, we at GPI believe that our product range is of the
highest quality and represents great value for money. We back our product range up with our
industry leading warranty.
Please see below for the step by step instructions on how to register your product warranty on-
line.
GPI Sport & Fitness
https://service.gpi.com.au/registerwarranty.php
gpisports.com.au

4
IMPORTANT SAFETY
INSTRUCTIONS

5
3
1.Board X1
2.Ring X1
3.Net X1
4.Board Bracket X2
5.Bolt X2(M8X40mm)
6.Nut X2
7.Bolt X2(M8X 16mm)
8.Bolt X2(M8X 90mm)
9.Nut X2
10.Cap X1
11.Top Pole X1
12.Middle Pole X1
13.Bottom Pole X1
14.Base X1
15.Wheel Shaft X1
16.Wheel X2
17.Bolt X1(M8X90mm)
18.Nut X1
19.Pole Brace X2
20.Bolt X2(M8X20mm)
21.Nut X2
22.Bolt X4(M8X80mm)
23.Nut X4
24.Boltx2(M8x110mm)
25.Spring washerx2
26.Springx2
27.Nut X2
28.Connect Plate X 1
29.Water Cap X 1
EXPLODED
DIAGRAM

6
2
ASSEMBLY STEPS
1. Open the carton, find out all the parts listed on page 3, two adults are required for
assembly.
2.Fix ring(2)and connect plate(28) on board(1) by bolts(5) and nuts(6).
After that, use bolts(7) to fix the top of board bracket(4) on the back of board(1) tightly. Insert top
pole(11) into connect plate(24), then fix top pole(11) and connect plate(24) and the end of board
bracket(4) by bolts(8) and nuts(9).
3. Fix top pole(11) and middle pole(12) together by 2 pcs of bolt (22) and 2 pcs nuts(23).
4. Place the base(14) on a chosen playing ground, the surface beneath the base should
be horizontal. Insert the wheel shaft(15) into wheel (16), base(14) and end of bottom pole (13)
orderly.
5. Fix one end of the 2pcs pole braces(19) on bottom pole(13) by bolt(17) and nut(18).
Then fix another end of the 2pcs pole braces(19) on base(14) by bolt(20) and nut(21).
6. Fix middle pole(12) and bottom pole(13) together by 2 pcs bolt (22) and 2 pcs nuts (23).
7. Tighten all the nuts, filling the base with water or sand as below:
WHEN USING WATER
－Place the base on a smooth surface only! Without gravel or other sharp objects which
could puncture the base and cause leakage.
－Check the base frequently for cracks and punctures.
－Always check the water level before the game. If a leak is found or the water level is
low, lay the system onto the ground so that it can't tip over.
－Add a tablespoon of chlorine bleach to the water each time the base is filled with
wat er. This prevents algae forming inside the base.
ASSEMBLY
INSTRUCTIONS

7
4
MOVING THE SYSTEM
＊The system should be moved by 2 adults capable of handling its weight.
Children should not be allowed to move the system.
＊Stand in front of the system and pull the pole forward until the system is balanced
on its wheels.
＊Move the system to the desired location and carefully set the base down
WARNING!!
FAILURE TO COMPLY WITH THESE WARNINGS COULD RESULT IN INJURY.
FAILURE TO COMPLY COULD ALSO RESULT IN PROPERTY DAMAGE.
1. Never hang from the rim or climb on the pole as injury or property damage could occur.
For these reasons do not perform dunking activities on this system as it is not designed
for such use. Do not allow children to climb on the basketball system.
2. Never leave the unit assembled without weight in the tank.
3. Check the base frequently for leaks or loose cap. Slow leakage could cause the system to
tip over unexpectedly and damage the floor if used inside.
4. Seat the pole sections properly. Not doing so might allow the pole sections to separate
during play or during transportation for this system.
5. Further check before each use if all fittings and hardware are tight.
6. Climate, corrosion or misuse could result in system failure.
7. This system is not intended for children 3 and under.
8. All payers must use sufficient guards when playing.
POLE CARE AND SYSTEM MAINTENANCE
The life of your basketball system depends on many variables. The climate, exposure to
corrosives such as salt, pesticides or herbicides and excessive use or misuse can all
contribute to pole failure, which may cause property damage or personal injury.
Check your basketball system frequently for loose hardware, excessive ware and signs of
corrosion. For safety reasons and to prolong the life of your basketball system, you must
take the following preventive measures:
＊Check all nuts and bolts. If any are loose, tighten them.
＊Check all pole sections for visible rust, chipped or cracked paint. If either are present,
do the following:
1. Use an emery cloth to completely remove any rust or chipped paint.
2. Clean the area with a damp cloth and allow it to dry.
3. Apply two coats of a rust preventative, high gloss enamel to the area. Allow the paint to
dry between two coats.

To register your warranty, please go to
www.gpisports.com.au/warranty
275 Wellington Road
Mulgrave, VIC, 3170 Australia
DISTRIBUTED EXCLUSIVELY BY
BASKETBALL SYSTEM
Product Code: FAIBBS101