PK TX User manual

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS PAGE
2
GRILL CAPSULE PARTS LIST:
6) Grill lid capsule
7) Grill bottom capsule
8) Lid handle (plus hardware)
9) PK Original brand plate
(plus hardware)
10) Hinged Cooking Grid
11) Charcoal Grate
STAND PARTS LIST (i f n e e d e d ):
1) TX Stand lower tube sections
(assembled at factory)
2) TX Stand upper tube section
3) TX Stand shelf mount
4) 2 Wheels (plus hardware)
5) Durabilium™ shelf
TOOLS NEEDED:
1) Phillips head screw driver
2) Allen wrench (included)
3) Pliers or adjustable wrench
6
7
8
9
10
1
2
3
4
5
11

ASSEMBLY INSTRUCTIONS PAGE
3
STAND ASSEMBLY STEPS:
Unpack box and lay out all parts.
2. Use included allen wrench to assemble wheels to
lower tube section. Do not over-tighten.
1. Insert orange bushings
STEP
1

ASSEMBLY INSTRUCTIONS PAGE
4
1) Place grill bottom capsule on PK-
TX™ stand oriented as shown. Ensure
the capsule sits down securely on the
cross bars.
Hinge side of grill
2) Place charcoal grate and hinged
cooking grid inside grill bottom
capsule.
3. Attach upper tube section to lower
tube section and secure with provided
hardware as pictured.
4. Attach shelf mount section to lower
tube section and secure with provided
hardware as pictured.
GRILL CAPSULE ASSEMBLY STEPS (i f n e e d e d ):
STEP
2

ASSEMBLY INSTRUCTIONS PAGE
5
Sawtooth Washers
Sawtooth Washers
4) Assemble lid handle to grill lid
capsule.
5) Place grill lid capsule on top of
grill bottom capsule. Open and close
the lid once to ensure the hinge is
properly seated.
6) Snap PK-TX™ Durabilium™ shelf
onto PK-TX™ stand to secure grill
bottom capsule to stand. The shelf
will sit on top of the tabs on the grill
capsule - holding it in place.
3) Assemble Original PK brand plate
to grill lid capsule.

ASSEMBLY INSTRUCTIONS PAGE
6
TO COLLAPSE STAND FOR TRANSPORT
1) Slide shelf away from grill capsule to allow capsule to be removed.
2) Lift grill capsule o of stand.
3) Pull both upper tube sections of stand up and together.
4) Slide shelf into place to secure stand in collapsed position.
7) Lay stand down with PK-TX™ logo facing up.
8) Place grill capsule on stand using rubber grill mounts.
9) Use tie-downs as needed to fasten grill capsule and other items to stand.
(Tie downs not included)
PK-TX™ STAND CARE
• Clean as needed with damp cloth and mild soap.
• Sweep ashes out of lower ash trays after each use.

ASSEMBLY INSTRUCTIONS PAGE
7
VISIT US AT PKGRILLS.COM FOR
PRODUCT INFORMATION, ACCESSORIES, RECIPE IDEAS & MORE.

PKGRILLS.COM