Play PLAYFIT-SW75 User manual

Thanks for choosing PLAYFIT,
Please read the user guide carefully before using.
User Guide
PLAYFIT-SW75
SW-408

1. Download and install App
iOS 8.0 version
or above
Andriod 4.4 system
or above
Bluetooth 4.0
or above
Correct operation: Scan the
QR code below or
download PLAYFIT APP
through the mobile APP
store to pair with the watch.
Pair Watch
Wrong operation: Pair the
watch directly with the
bluetooth in your mobile
phone’s settings.
You can set up the watch through the PLAYFIT app for iOS
or Android devices. The steps are shown as follows:
Notes: The hardware platform of the equipment system
shall meet requirements.
01

2. Pair process
Notes:
During pairing process, PLAYFIT will prompt you to enable
GPS and Bluetooth, and authorize PLAYFIT to get access
to the GPS on you mobile phone.
Phones will not prompt you with any information unless
you complete Bluetooth pairing on your PLAYFIT SW75
watch in the built-in Bluetooth in you mobile phone after
pairing.
1. Turn on the Bluetooth and
GPS on your mobile phone
2. Find the binding request
on the pull-down list on the
home page of the APP
Select band from
search list
Tap on ‘Confirm
bind Device’ to
complete binding.
02
PLAYFITSW75
PLAYFIT21
PLAYFIT53
PLAYFITSW75
PLAYFIT21
PLAYFIT53

Notes!
Please synchronize the data at least once within 7 days
to avoid data loss at the watch end.
The phone also needs to be connected to the paired
watch in the bluetooth setting interface of the mobile
phone, so that the watch can be alerted. The steps are
shown as follows:
Open the phone > set > bluetooth > search and click
pair
In daily wear, the watch can
detect all kinds of product data.
The user needs to connect the
watch with bluetooth on the APP
before synchronize operation.
The detailed operations are
shown as follows:
Synchronize Data
Open the mobile APP > swipe
down the page > sync prompt
appears
03

2. Wear/install
Wear Replace the strap
Switch
1. Charging schematic
Instruction for Use
Buckle the watch into the charger seat as shown in the
picture. It needs to be charged to activate the watch when it
is started for the first time.
Wear the wristband one finger away
from the wrist bone and adjust the
tightness of the wristband to a
comfortable position.
Flip the switch and take
out the wristband
Tip: Wearing too loosely may affect the accuracy of heart
rate data.
04

2. Watch dial switch
Operating Instructions
1. Definition of key function
Long press the
left key:
Enter the sports
quickly Long press the
right key: start
Short press the
right key:
Return to previous
interface
Left key setting steps: Function list > set > long press
Replacing the dial interface will
appear after long pressing the dial.
05

4. Dial data view (default dial)
3. Main interface operation
Swipe the screen to enter different interfaces (interactive
interface tile diagram)
Click the screen to switch different data
Step number CalorieDistance
Notice bar
Data bar
Function list
interface
Status bar
06

Function Introduction
1. Icon function introduction
Enter the sports
window, and choose
different sports
modes. Change the
sports mode on the
APP
Perform a heart
rate test to check
your heart rate
data for the day.
Help you regulate
your breathing and
relax your mood.
View, turn off or
turn on the alarm
clock. You need to
add an alarm clock
on the mobile APP.
Control music play
on your mobile
phone (watch
cannot store music)
Have the timing
and countdown
function.
Record recent
sports.
Notes: For more functions (sleeping) and operation, please
check the PLAYFIT software of the mobile phone.
07

3. Women’s health tracking
Display location: in the data bar
2. Start sports
①Enter sports
Click the sports icon > select the sports type > enter
the sports countdown automatically
②During sports
Pause sports: short press the right key
Restore sports: short press the right key
③End sports
End sports: long press the right key > select the end
button on the screen
Women’s health tracking function, which is used for
recording menstrual changes, tracks individual menstrual
cycle and predicts ovulation (it needs to be enabled on the
APP).
08

Product Parameters
Cleaning and Maintenance
Model No. SW-408 Screen type 1.3-inch
color screen
Battery
capacity 210mAh Charging voltage 5V ±0.2V
Charging time about 2.5 hours Battery life over 10 days
Waterproof
level 5ATM Weight of product 39g
Operating
temperature -30°C to 70°C Bluetooth version BLE 4.0
2402-2480MHz Max. transmission
power consumption 0 dBm
Product
frequency
09

Frequently Asked Questions
It is recommended to wear and maintain according to the
following three points:
1. Keep the product clean
2. Keep the product dry
3. Do not wear it too tight.
Do not use household cleaners to clean the watch, but
use the soap free detergent.
It is recommended to use alcohol to scrub stains that are
not easy to remove.
1. Mobile APP search for the watch failed
i). It is recommended to update PLAYFIT to the latest
version.
ii). It is recommended to close all programs, restart the
Bluetooth, and then connect.
iii). Confirm whether the mobile phone system meets Android
4.4 or IOS 8.0 or above.
2. The watch received no alerts, text messages or phone calls
i). You need to turn on the smart reminder function and the
call reminder switch in the APP, and synchronize to the
watch.
ii). The iphone needs to be paired with the watch via
Bluetooth. (Please check the column of "Synchronize Data"
for details)
iii). You need to keep your watch connected to Bluetooth.
3. Bluetooth is often disconnected
i). If the distance between the watch and the mobile phone
is too far, the connection effect of more than 7m bluetooth
is obviously weakened.
10

ii). Whether there is a shield between the watch and the
mobile phone, the human body, wearing metal jewelry,
etc., will interfere with the bluetooth connection signal.
ii). Whether the bluetooth function of the mobile phone is
abnormal.
4. About data backup
The data of the watch is synchronized at least once every 7
days to the mobile phone (the watch end only keeps the data
of the last 7 days).
5. How to Shutdown or reboot the device
Shutdown operation: Watch > Setting > Shutdown
Reboot the device: App > Device > More > Reboot the device
6. Do I need to keep my bluetooth on when I wear my watch?
i). For the three functions, i.e. counting steps, sleeping and
alarm clock, you do not need to connect the watch to the
mobile phone all the time. If you only need to wear a watch
when you exercise, you can connect the watch and your
mobile phone to view the data synchronously after the
exercise.
ii). For the functions of call alert, message alert, find the
phone, you need to turn on the mobile phone’s bluetooth,
and maintain the connection with the mobile phone.
More detailed questions can be answered with help and
feedback in the APP.
Operation steps: PLAYFIT > > help and feedback
11

Safety and Product Information Notes
Warning
Battery warning
Do not disassemble, bore or damage the battery. Do not
disassemble the built-in batteries of non-replaceable battery
devices. Do not use sharp objects to remove the battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic
devices, please consult your doctor before using the heart
rate monitoring strap.
The watch’s optical heart rate sensor glows green and
flashes. If you suffer from epilepsy or are sensitive to blinking
light sources, please consult your physician if you can wear
this product.
The device tracks your daily activities through sensors. These
data are intended to tell you about your daily activities, such
as steps, sleep, distance, heart rate and calories, but may not
be completely accurate.
The device, accessories, heart rate sensors and other
relevant data are designed for entertainment and fitness, not
for medical purposes. They are not applicable to the
diagnosis, monitoring, treatment or prevention of any
diseases or symptoms. The heart rate data is for reference
only. We are not responsible for any consequences caused
by any data deviation.
12

Cycling Warning
Please maintain good judgment at all times and ride in a safe
manner. Make sure your bike and hardware are properly
maintained, and all components are properly installed.
Matters Needing Attention
Watch data needs to be kept once every 7 days to avoid
data loss.
The watch has no waterproof effect on seawater, acidic
and alkaline solutions, chemical reagents and other
corrosive liquid. The damage or defects caused by misuse
or improper use are not covered by the warranty.
Sports mode supports up to 6 hours of exercise at a time.
The watch has a waterproof level of 5ATM and supports
cold water shower, swimming, but not diving.
Avoid wearing the watch too tight in daily use. Please keep
the parts of the watch touching the skin dry.
When your heart rate is measured, keep your arm still
during the test.
The device meets the EU ROHS criterion.
Please refer to IEC 62321, EU ROHS
Directive 2011/65/EU and revised directive.
13

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could avoid the user’s authority to operate
the equipment.This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
14

15
Old electrical appliances must not be disposed of
together with the residual waste, but have to be
disposed of separately. The disposal at the
communal collecting point via private persons is for
free. The owner of old appliances is responsible to
bring the appliances to these collecting points or to
similar collection points. With this little personal effort,
you contribute to recycle valuable raw materials and
the treatment of toxic substances.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.

PLAYFIT
Scan here to download