ARC PR102 User manual

Arc 2.0
USER MANUAL
PR102

• To activate the wristband,
press and hold the button
for 5 seconds
• Press the button to
modes
• Press & hold the button to

Using the Wrist Band, Arc 2.0
Arc 2.0 is easy-to-use and simple to navigate. Arc 2.0 works with ACT2FIT,
the app designed to help you tracking your tness goals. Simply sync your
wrist band data with the tness app daily so you can review and monitor
your STEPS, DISTANCE, CALORIES, EXERCISE TIMER, TARGET GOAL,
SLEEP MONITORING both day and night.
PLEASE NOTE : the wrist band will automatically RESET at MIDNIGHT. At that time,
the data in the PREVIOUS DAY will automatically be saved. Arc 2.0 will store up to
30 days of activity so you can SYNC the wrist band & app at your convenience.
Setting the Wrist Band, Arc 2.0
You need to install the free ACT2FIT App on your Bluetooth smart ready device
before setting up or transferring data to the wrist band. Search for the ACT2FIT
App in iTunes or Google Play.
To provide you with the most accurate information, please set up all
information requested in the App. Incorrect or missing information may
result in inaccurate workout / activity recordings.
Once all information is entered in the app, press “UPDATE” on your smart
ready device. All information is now ready to sync to your wrist band.
SIMPLE!

Sync the Wristband & App
Once all of your information has been entered in the App, it is time to
SYNC to the wrist band.
STEP 1 (APP)
START the APP from the device. Make sure the Bluetooth is ON.
STEP2 (WRIST BAND)
PRESS & HOLD the button for 3 seconds at any modes except SLEEP mode.
“SYNC” will appear in the display and the syncing process is started.
STEP 3 (APP)
Your activity data will appear in the App once the SYNC is completed.
NOTE: if you change your data during this process (update weight, BMI, etc.)
Press “UPDATE” to conrm the data & “SYNC” to the wrist band again.
This is important to SYNC the wrist band with your smart device everytime
you start using it (after recharging or change your data), since the calculation
of calories and distance on the wrist band are all dependent on the settings at the
App. In case you find the calories or distance with no data (or strange data), it may
due to not having to sync your device properly before using it. If this happens,
simply sync it again.
Requirements Syncs with Apple iOS Devices
iOS 6.0+, iPhone® 4S+, iPod Touch® (5th Generation +)
Android Devices Android 4.3 or above
Bluetooth® 4.0 or Bluetooth® Smart Ready devices and more

Modes of Operation
Press the button to toggle through the following modes.
Time > Step > Distance > Calories > Exercise Timer > Goal Meter > Sleep
Press and hold 3 seconds to go to “Sync” from any modes except during “Sleep”
“Low Batt” will appear when the battery is low
Sleep Low BatterySync
Time DistanceExercise Timer
Calories
Steps Goal Meter