Misfit SWAROVSKI SHINE User manual

OPEN SWAROVSKI SHINE
Place the Battery Tool into the notch and
open the back cover by doing a side to
side rocking motion with the opener. Then
pry open the back cover.
打開施華洛世奇 SHINE
將電池工具插入凹位，繼而兩側搖動來
啟底蓋，然後將其輕輕撬起。
打开施华洛世奇 SHINE
将电池工具插入凹位，摇动两侧开启底
盖。然后将其轻轻撬起。
INSERT BATTERY
Place the battery directly into the
device with the plus sign facing the
user. Centrally place the back cover on
the device and press firmly together
until you hear a click.
嵌入電池
將電池直接放入裝置中，正極朝向用
戶。將底蓋置中放在裝置上，並用力按
下直至聽到「咔」一聲。
嵌入电池
将电池以加号朝向用户的方式直接放入
装置中。将底盖置中放在装置上，并用
力按下直至听到「咔」一声。
1.
2.
3.
LINK SWAROVSKI SHINE
Download the Misfit SHINE™
application from the App Store.
Create an account, set a goal and link
SWAROVSKI SHINE by placing it on the
screen when prompted to do so.
It may take a couple minutes as
SWAROVSKI SHINE upgrades to the
latest firmware. 1. 2.
WEAR AND MOVE
Put SWAROVSKI SHINE into your
prefered jewelry piece or sport band
and get moving!
Use the pouch to protect the delicate
crystal when taking SWAROVSKI SHINE
out of the carrier.
Insert SWAROVSKI SHINE from back
Slake bracelet
Necklace
Sport band
Wristband
DOUBLE TAP
Double tap SWAROVSKI SHINE with one
or two fingers to see progress toward
your daily goal and the time (when
enabled from ‘My SHINE’ in the app).
SWAROVSKI SHINE is meant to be
worn, so tapping when SWAROVSKI
SHINE is on a hard surface does not
work well.
Progress
25%
12, 3, 6, 9:
reference lights
hour: bright light minute: blinking
light
75%
10:10 10:10
100%
Time
SYNC
Sync with the app to see your activity
stats, highlights, and watch yourself
improve over time.
QUICK START GUIDE

ADDITIONAL INFORMATION
Warning: choking
hazard - small parts.
SWAROVSKI SHINE IS NOT
A TOY OR MEDICAL DEVICE
Complies with
IDA Standards
DA103787
Hereby, Misfit WearablesCorporation, declares that Shine is in compliance with
the essential requirements and other relevant provisions of Directive 100/5/EC
For further information on
the SWAROVSKI SHINE family, please visit:
www.swarovski.com/smartjewelry
CARE ADVICE
You are now the owner of a genuine Swarovski handcrafted product.
Swarovski crystal is a delicate material, which must be handled
with special care in accordance with the following care advice
in order to avoid damages to the product, which Swarovski
may not be held liable for. To ensure that your Swarovski
product remains in beautiful condition over time, please
observe the following.
- Store your jewelry in the original packaging or a soft pouch to
avoid scratching.
- Polish frequently with a soft cloth to maintain the original,
lustrous finish.
- Please remove jewelry before washing hands, swimming or
applying body care products such as perfume, hairspray,
soaps and lotions as this could harm the metals and reduce
the lifetime of the plating, as well as cause discoloration and
loss of crystal brilliance.
- Put on jewelry last when dressing, and take off first when
undressing.
- Note that jewelry carriers shall not be exposed to water.
- Avoid hard contact (e.g. knocking against objects) which
could cause scratches, chips and other damage.
ATTENTION
SWAROVSKI SHINE‘s battery life can be shortened with heavy use.
Prolonged exposure to salt water or chemically treated water will
reduce water resistance. Improper installation of the rear cover will
result in loss of water resistance.
SWAROVSKI SHINE’s edges can be sharp, so handle with care.
SWAROVSKI SHINE and its accessories contains small parts,
which can be a choking hazard. If battery is swallowed,
immediately seek medical help as serious injury may occur.
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the
receiver.
- Connect the equipment to outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For further advice on the care of our jewelry products and
information on the jewelry warranty, please contact your
Swarovski retailer or visit
www.swarovski.com/customerservice
For further information on our mobile app and on technical
details as well as the warranty of our tracking device, please
visit our partner ’s site www.misfit.com/support
COMPLIANCE
IC COMPLIANCE STATEMENT
This device complies with Industry Canada licence – exempt
RSS standard(s). Operation is subject to the following two
conditions: 1) this device may not cause interference, and 2)
this device must accept any interference, including interference
that may cause undesired operation of the device.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device may
not cause harmful interference, and 2) this device must accept
any interference received, including interference that may
cause undesired operation.
WARNING
The changes or modifications not expressly approved by the
party responsible for compliance could void user’s authority to
operate the equipment.
SWAROVSKI® and the Swan Logo are registered trademarks
of Swarovski AG. All other trademarks are property of their
respective owners.
施華洛世奇®及天鵝圖示是 Swarovski AG 的註冊商標。所有其他
商標均為其各自所有者的財產。
施华洛世奇®及天鹅图示是 Swarovski AG 的注册商标。所有其他
商标是其各自所有者的财产。
合規說明
IC 合規聲明
本裝置符合加拿大工業部許可──免除 RSS 標準。操作應符合以下兩
個條件︰1) 本裝置不會造成干擾﹔2) 本裝置必須接受任何干擾，包
括可能導致裝置不理想運作的干擾。
FCC 合規聲明
本裝置符合 FCC 規則第 15 部分。操作應符合以下兩個條件︰1) 本
裝置不會造成有害干擾﹔2) 本裝置必須接受所接收的任何干擾，包括
可能導致不理想運作的干擾。
警告
未經負責合規性一方的明確許可而擅自更改或改裝本設備，可能讓用
戶喪失此設備的操作權。
合规说明
IC 合规声明
本装置符合加拿大工业部许可──免除 RSS 标准。操作应符合以下两
个条件︰1) 本装置不会造成干扰﹔2) 本装置必须接受任何干扰，包
括可能导致装置操作不理想的干扰。
FCC 合规声明
本装置符合 FCC 规则第 15 部分。操作应符合以下两个条件︰1) 本
装置不会造成有害干扰﹔2) 本装置必须接受所接收的任何干扰，包括
可能导致操作不理想的干扰。
警告
未经负责合规性一方的明确许可而擅自更改或改装本设备，会令用户
丧失操作此设备的权利。
INFORMATION TO USER
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy. If not installed and used in accordance
with the instructions, it may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following
measures:
FCC ID: PT3-SC
IC: 10638A-SC