Playcore ultraPLAY uPLAY TODAY MADDIE'S CHASE... User manual

Issued/Revised:
MADDIE'S CHASE
uPLAY TODAY
800.458.5872 www.ultraplay.com
4/12/2018
MODEL # UPLAY-006-N
MODEL # UPLAY-006-P

Issued/Revised:
MADDIE'S CHASE
uPLAY TODAY
800.458.5872 www.ultraplay.com 1
4/12/2018
Dear UPlayToday™ Customer,
Thank you for choosing to purchase and install a UPlayToday commercial playsystem by UltraPlay®.
We appreciate the confidence you have placed in our company, and we will strive to earn your trust.
This is your Owner's Manual & Assembly Instructions booklet. We have designed this manual
specifically for the products that you have purchased. Included in this manual you will find the following:
-Maintenance schedule & record -Product installation instructions
-Safety guidelines -2D top view drawings
-Warranty information -Ground plan
Please save this booklet for future reference.
The first several pages of this booklet contain important and valuable information regarding the general
placement, installation and safety practices common to commercial play equipment. Please read this
information carefully and use your best judgment as to how these guidelines apply to your specific
situation.
If you have any questions concerning your new equipment, you can contact a UPlayToday Customer
Service Representative at 1-800-458-5872 or reach them electronically by sending an e-mail
to: customerservic[email protected].
For more information on UPlayToday and UltraPlay products, please do not hesitate to give us a call or
visit ultraplay.com.
Thank you for your business; we look forward to working with you on all of your future playground
equipment projects!
Sincerely,
UPlayToday by UltraPlay
A PlayCore® Company
To register your equipment and activate your warranty, please go to www.ultraplay.com within 30
days of delivery. This will allow UltraPlay to have a record of your purchase in case of warranty
claims.

Issued/Revised:
GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES
uPLAY TODAY
800.458.5872 www.ultraplay.com 2
4/12/2018
Maintaining your playground equipment and its surrounding area is essential to minimizing the risk of
injury to users as well as maximizing its useful lifespan. UPlayToday STRONGLY recommends that you
follow these Safety Guidelines in conjunction with conducting periodic maintenance inspections using
the accompanying Playground Maintenance Checklist.
When installing your playground, always consider local conditions. Good common sense works
hand-in-hand with the instructions.
LOCATING YOUR PLAY STRUCTURE:
Comply with the following when choosing the location for your new equipment: Equipment shall
be positioned to eliminate conflicting traffic patterns. As a general rule, allow at least 72" of free space
around the entire structure, EXCEPT for slide exits, which require a distance X equal to the highest point
of the sliding surface with a minimum of 72" and maximum of 96" from the edge of the slide. (example: a
Wave Slide from a 72" deck requires 72" of clear space with resilient surfacing in front of its exit.) Swings
must have a minimum Use Zone in each direction of twice the swing beam height. This minimum area
should be filled with the appropriate resilient surface material. Read further for resilient surfacing
recommendations.
If your equipment includes any metal slides, they should be positioned in a shaded area, or at least be
placed to avoid the direct rays of the sun.
Never overlap the safety zones of adjacent equipment. All separate play equipment must have its own
safety zone, and these cannot overlap. So, if you have an existing structure with a slide exit oriented
toward your new one, add a minimum safety zone to that of the existing slide to determine how far away
you need to be. Never install playground equipment near, around, or in conjunction with swimming
pools, ponds, lakes, or any other bodies of water.
CHOOSING RESILIENT SURFACE MATERIAL:
NEVER INSTALL EQUIPMENT ON CONCRETE, ASPHALT OR EVEN GRASS WITHOUT RESILIENT
SURFACING! A fall on a hard surface from as low as a 36" high deck has been found to result in serious
injury to the user.
According to ASTM guidelines: "Unacceptable material for use zones of play structures with fall heights
of 18" or less shall include all hard or abrasive materials such as asphalt, concrete, terrazzo, or other
materials with similar characteristics. "Other standards apply for equipment with fall heights greater than
18".
Soft, resilient surfacing should be placed in the use zones of all equipment, as specified for each type of
equipment, and at depths to meet the critical fall heights as specified by the U.S. Consumer Product
Safety Commission, ASTM standard F-1487 and Canadian Standard CAN/CSA-Z-614.
Your UPlayToday structure has a maximum fall height of 72".

Issued/Revised:
GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES
uPLAY TODAY
800.458.5872 www.ultraplay.com 3
4/12/2018
Install Wood Mulch (EWF) at a depth of 12". Over time this mulch will compress to a depth of 9" as
required by the U.S. Consumer Product Safery Commission, ASTM standard F-1487 and Canadian
Standard CAN/CSA-Z-614. For more information on the proper surfacing materials, call the CPSC
hotline at 1-800-638-2772.
Worn surfaces around equipment should be restored. Concrete footings should never be exposed. Refer
to the attached PLAYGROUND MAINTENANCE CHECKLIST.
Check for erosion and cratering of surfaces under slides and heavy traffic areas and restore surfacing as
necessary.
Surfacing leading to play opportunities for children with disabilities should be firm, stable, slip resistant,
and resilient.
Tip: If your surfacing is of the loose variety, checking for proper depth over time can be made easy by
applying a non-removable fluorescent tape of paint in a bright color at the proper level on each upright
post. Thereafter, as the resilient material compacts or washes away, the person responsible for regular
maintenance inspections can easily see it must be replenished as the marks become visible.
OVERHEAD OBSTRUCTIONS:
Overhead obstructions (for example, exterior obstructions such as tree limbs and interior lights) within
the use zones of play structures shall be a minimum 84" (2130 mm) above each designated play surface
outdoors and a minimum of 48" (1220 mm) above each designated play surface indoors.
All overhead utility line clearances above outdoor supervised and outdoor unlimited access settings shall
comply with all local, state, and national codes, such as the National Electrical Safety Code. For specific
equipment fall zone requirements, refer to the CPSC and ASTM F1487 and use the more stringent of
the two.
CATCH POINT & PROTRUDING HARDWARE:
There should be no dangerous pieces of hardware, such as protruding bolt ends and narrow gaps in
metal connections. Exposed hardware can cut or puncture skin and catch clothing drawstrings, which
could strangle a child.
All protruding nuts and bolts should be eliminated; sharp edges on pipes should be capped or removed.
Check for bent, broken, or severely worn pipe and replace. Examine slide bedways, bedrails, handrails
and exits for foreign objects, holes, and rough edges.

Issued/Revised:
GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES
uPLAY TODAY
800.458.5872 www.ultraplay.com 4
4/12/2018
TRIPPING HAZARDS:
There should be no exposed concrete footings, abrupt changes in surface elevations, tree roots, tree
stumps, and rocks, which can trip children and adults. Check for trip hazards, such as the balance beam
support posts, or environmental trip hazards, such as rocks or roots in the play area. Make all necessary
improvements or repairs.
AFTER THE EQUIPMENT IS IN USE:
-Never add components not intended for use with this product.
-Never install other play equipment, fencing, landscaping, etc., that encroach upon the safety zones of
this equipment.
-Check overall stability and rigidity of all play equipment.
-Check for proper assembly, installation and ground anchoring.
-Check and re-tighten all fasteners after the first few days of use and again after three weeks of use.
Thereafter, exercise normal maintenance procedures. Use of a thread-locking compound on the
threads of bolts can prevent persistent loosening.
ROUTINE MAINTENANCE:
Regularly inspect and maintain your playground equipment and its surrounding area to help ensure the
safety of the user. Proper maintenance of UPlayToday equipment includes using the accompanying
Playground Maintenance Checklist found in this booklet to identify areas requiring repairs or
replacement, and barricading the equipment to prevent use while corrections are being made.
As the Owner/Operator of the equipment, you should establish and maintain detailed installation,
inspection, maintenance, and repair records for each public-use playground equipment area. Find out if
your playground has a designated official who periodically inspects the play equipment for preventative
maintenance. This includes but is not limited to: replacing missing, broken or worn-out components;
securing hardware; checking for deterioration in the metal or plastic materials; maintaining the proper
depth of surfacing material; and cleaning up debris.
The following are some regular maintenance areas of note:
-Check for and repair damage caused by wear or vandalism, a major factor in injury causing situations.
-Proper maintenance of UPlayToday equipment requires regular tightening of all bolts, nuts, set
screws, and other hardware.
Continued on next page

Issued/Revised:
GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES
uPLAY TODAY
800.458.5872 www.ultraplay.com 5
4/12/2018
-All equipment should be free of rust and repainted with an appropriate lead-free paint whenever
necessary to deter rusting. This should also be done for any chipped or peeling areas.
-Regular checking of all parts, casting, etc., should be made. If part is broken or worn it should be
replaced immediately.
-Check for missing or broken parts, rungs, or steps and repair as necessary.
-Check to be sure there is free movement on moving attached parts.
-Check for hard surfaces and correct, including under slides and etc. where loose surfacing may have
been kicked away. Refer to CPSC surfacing requirements.
-Check for surfacing material that is worn or scattered and restore.
-Debris, broken glass, trash, or other foreign objects within or on the play area/equipment should be
removed.
-Check for poor drainage areas and repair.
-Check concrete footings to see if they are exposed, cracked, or loose in the ground and repair as
necessary.
-Check for crush points (exposed mechanisms, junctures of moving components) and eliminate.
-Check for broken supports or anchors. Check for stability in ground. Structures should not be easily
swayed; connections should be solid and adequately secured.
-Check all posts in ground for corrosion or rot below grade.
-When flexible components are anchored in the ground, check and make sure anchoring devices are
below the level of the playground.
-Check exit areas of slides. The exit area should be no more than 11" from the protective surface for
slides under 48" high. For slides over 48" high, the height of the exit region from the surface should be
between 7" and 15".
-Check the surface area around slide exit for erosion and other damage and repair if necessary.
-Check for visible cracks, bending, warping, rusting, or breakage of any component and repair as
needed.
-Check for accessible sharp edges or points. Check for protruding bars, bolts, nuts, etc. Eliminate
these conditions.

Issued/Revised:
GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES
uPLAY TODAY
800.458.5872 www.ultraplay.com 6
4/12/2018
-Check for exposed ends of tubing that should be covered with plugs or caps.
-Check for loose bolts, nuts, etc. and tighten.
-Check for broken or missing rails, steps, rungs, or seats and replace.