PLAYNETIC DJ Deluxe User manual

Playnetic Dj Deluxe
User Manual
DDL90035_10052021
Loohorst 3 | 7207 BL Zutphen | The Netherlands
[email protected] | www.playnetic.nl | [phone]

Loohorst 3 | 7207 BL Zutphen | The Netherlands
[email protected] | www.playnetic.nl | [phone]
2
Install the product
Overview product
Control the volume
Check interactive elements
Play and test
Maintenance
3
3
4
3
4
6
Install and manage a timelock 5

Install the product
Install the product according to the Playnetic Installation Manual.
During the installation, make sure that the potential users can not
be exposed to hazards / dangerous situations. Check the stability
of the product.
Number of users
Playnetic recommends you to use the product with a maximum of
one user at a time.
3
Overview product
The overview above shows where all important parts can be
found.
Check interactive elements
Use the product and generate energy. If applicable, check that the
interactive elements such as the music, lights, smell, electronic- and
mechanical parts are working properly.
wheel for
generating
energy
pick up pad
servicehatch
speakers
computer
LED light

Control the volume
1. Remove the bolts with the supplied hex key.
2. Remove the service hatch with the label.
3. Generate energy with the product.
4. Adjust the volume.
5. Close the service hatch.
Play and test
1. Generate energy with the product.
2. Test if the pick up pad works correctly, by putting your
telephone on it with music.
3. Test if the LED line runs correct.
4. Test if speakers work correctly.
*Are the tests incorrect? Then you should contact your local
dealer.
4
volume

5
“In progress, please wait...”
“Downloading data
completed, remove USB
device”
Receive timelock
1. Receive a USB device. Playnetic has set the
correct start- and endtime for you.
Install and manage a timelock
1. Remove the bolts with the supplied hex key.
2. Remove the service hatch.
3. Important! The timelock must be installed at 12
o’clock local time. If the installation is being done too
late or too early, the time lock will not work properly.
4. Put the USB stick into the computer.
5. Generate energy. Wait until the update is completed.
Remove the USB stick after completion.
6. Make sure that you put the dust cover back over the
USB port.
7. Close the service hatch.
Update your timelock 2x a year
For updating your timelock, use the USB device you
received from Playnetic with the correct start- and
endtime (same USB device for install option). Repeat
step 1 to 7 in ‘install a timelock’ to complete the update.

Maintenance
The product must be maintained according to the Playnetic
Maintenance Advice.
6