PLAZA CH0651 User manual

ASSEMBLY INSTRUCTIONS-PLEASE KEEP FOR FUTURE REFERENCE
Important-please read these instructions fully before starting assembly
PLAZA ROUND TABLE

Only clean using a damp cloth
and mild detergent,do not use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
Do not stand on the chair.
This product should not be
discarded with household
Do not use this char as step
ladder.
waste. Take to your local
authority waste disposal centre.
Assemble all parts and bolts
loosely during assembly,only
once the product is complete
should you fully tighten the
bolts.
Handy Hints
Regularly check and ensure
that all bolts and fittings are
tightend properly.

Top x 1 Pole x 1 Connector x 1
Base x 1 Cost Iron x 1 Feet pad x 4

c
M10 Nuts x 2
Flat Washers x 2 Spring washers x 2

x 2
D
x4
C x 2
(4)
(5)
(6)
A
(1)
(2)
(3)
x 2
B
Fitting the top
Insert the connector
3 into the pole 2 .
Put nuts spring washers
and flat washer onto
connector 3 .
Screw in the top 1 .
C
B A
Fitting the base
Insert the connector
3 into the base 2
and iron 5 .
Put nuts spring washers
and flat washer onto
connector 3 ,and tight
nuts .
C
B A
C

Screw in the feet pad
6 .