pleomax PWC-7300 User manual

0

1
Contents
Introduction………………………………………..2
System Requirements……………………………2
Package Contents………………………………..3
PC Camera Introduction…………………………3
Set up PC Camera……………………………….4
Software Installation
Arcsoft VideoImpression 2.0………………….5
Arcsoft PhotoImpression 5.0………………….7
Arcsoft Magic-i………………………………….9
Snapshot by PhotoImpression…..……………...11
Live Video Playing……………..…………………12
Camera Specifications......................................14

2
Introduction
Welcome to the world of digital imaging. The following
information will help you to use your camera to its full
capabilities.
For viewing pictures or video, camera must be connected
to your personal computer.
This camera is support Microsoft Video Class and plug &
play directly without driver.
System Requirements
zPentium®P4 1.2G CPU
zFree USB2.0 port
z256MB RAM internal memory minimum
z500MB free hard disk space
zInternet connection
zCD-ROM drive
zWindows compatible sound card and speakers
zWindows®XP Service Pack II
zWindows Vista™
Note: If your system is Windows XP Service Pack I,
please go to www.microsoft.com . It’s free to update
your system to Windows XP Service Pack II.

Package Contents
3
PC camera CD-disc Manual
PC Camera Introduction

Set up PC camera
Please manually adjust the focus to view the best image
quality.
You may mount the PC camera to your laptop or stand on
the desk. Plug the PC camera into the USB port of PC or
laptop properly.
4

Software Installation
AcrSoft VideoImpression 2.0
1. Turn on the computer and
insert CD installation Disc
into your CD-ROM drive.
Select and click
“ArcSoft
VideoImpression2.0”
2. Choose Setup Language
5
3. Click “Next”
4. Click “Yes”

5. Click “Next”
6
6. Click “Next”
7. Click “Finish”

Software Installation
AcrSoft PhotoImpression 5.0
1. Turn on the computer and
insert CD installation Disc
into your CD-ROM drive.
Select and click
“ArcSoft
PhotoImpression5.0”
2. Choose Setup Language
7
3. Click “Next”
4. Click “Yes”

5. Click “Next”
8
6. Click “Next”
7. Click “Finish”

Software Installation
ArcSoft Magic-i
1. Turn on the computer and
insert CD installation Disc
into your CD-ROM drive.
Select and click
“ArcSoft Magic-i”
2. Choose Setup Language
9
3. Click “Next”
4. Click “Yes”

5. Click “Next”
10
6. Click “Next”
7. Click “Finish”

Snapshot by ArcSoft PhotoImpression 5.0
1. Click on the “PhotoImpression
2.0” icon on the desktop.
2. Click “Video” from “Get
Photo”
11
3. Click “Live”
4. Click “Capture” for
capture image and the
picture is saved.

Live Video Playing
AcrSoft VideoImpression 2.0
1. Click on the “VideoImpression
2.0” icon on the desktop.
2. Click “Create a New Video”
12
3. Click “Capture From Device”

4. Click “Record”, save video
name and then click “Stop”.
13
5. Click “Done” to finish. Now you
can play the video.

14
Camera Specification
Image Sensor 1280x1024 pixels, CMOS
Lens Specification
White Balance
Exposure
Frame Rate
Focus Range
Depth of Field
PC Interface
Video Format
Audio
Video Capture Res.
System Requirements
Snapshot
Still Capture Res.
Power
Bundled Software
F3.0, f=6.3mm
Auto
Auto
1280x1024 pixels @ 8~10fps
640x480 pixels @ 30fps
Manual focus, 1cm to infinity
50cm to infinity
USB2.0
AVI
Built-in microphone
1.3mega/ 640x480/ 320x240
Support Microsoft Video Class
Win XP Service Pack II above
Without driver
software
Up to 1.3M pixels
From USB port
ArcSoft VideoImpression 2.0
ArcSoft PhotoImpression 5.0
ArcSoft Magic-i
Specifications are subject to change without prior notice.

This symbol on the product or in the instructions
means that your electrical and electronic equipment
should be disposed at the end of its life separately
from your household waste. There are separate
collection systems for recycling in the EU.
For more information, please contact the local
authority or your retailer where you purchased the
product.
15