PLRElectronics USBTOWiFi User guide

Installer
Manual.
Contents
1. Share Folder Setup
2. Installation
3. Additional features

• Right click your newly made folder and go to
properties, select Security/Edit/Add. Under object
names enter, Everyone. Enable full control in
Advanced menu.
• Turn on SMB 1.0 in your windows features.
• On your PC, create a new folder with your desired
folder name

• Right-click your folder and select properties,
select sharing. Enable Share this folder in both
Share, and Advanced share, enable all permis-
sions.
• While in Properties under the Sharing tab, select Network and Sharing Center. At the
very bottom will be an option for Turn off password protected sharing, select it

This is the landing page for the basic installer
Here is how to use the USB2WiFi basic installer
Select ①Wifi Scan
Select on the SSID of the router you will be
pairing and click ②Select Wifi
Enter your WIFI’s password into the text box
next to ③Set Password. Then click ③Set
Password.
Next Select USBWIFI Status to see the results
of your inputs

Here is how to use the USB2WiFi basic installer
Now that the network is paired and tested, lets
begin pairing to our Share Folder. Select
Shared Folder Setup
*This would be an example of a
successful pair with user’s WiFi
Begin with ①Basic scan, if you have trouble
detecting your folder with the ① Basic Scan,
confirm that your not on a 5GHZ network as the
USB-To-WiFi is not compatible with 5GHZ
routers.
Use ②Full Scan to scan for every Device and
Share Folder on your network.
Results will be printed once the USB processes
the command. Highlight your desired share
folder and press ③Select to set the folder to
be paired.
After pairing to your desired folder, click ④
Test Share Folder so you may confirm pairing
with the Share Folder

Transfer mode
Here are the 3 listed methods of transfer.
• A1 will be used to share files between
Machine and Folder.
• A2 Will have the USB mirror the share folder,
and will not send files from the machine.
• A3 Will mirror the machine and will not
send files from the share folder
Options
Detach Time refers to the amount of time the
USB takes to boot up after being inserted into
the USB port. The number you will enter will be
in milliseconds. 9000ms would be 9 Seconds.
Useful for older machines having trouble
detecting the device.

Contact Us
www.PLRElectronics.com
[email protected]
817 405 3449
Follow Us
PLRElectronics
Thank you for choosing the USB-To-WiFi adapter to enhan-
ce your embroidery machine experience. If you have any
questions or need further assistance, our customer support
team is always ready to help.