Pluggit APRC User manual

Operating and installation instructions
Manuel d‘utilisation et d‘installation
www.pluggit.com
01/13 M-BIA-FB-190-460-E/F
Radio remote APRC
Télécommande APRC
for / pour Pluggit Avent AP190 / AP310 / AP460

The technology makes the difference.
Pluggit's value-added innovations for man and the environment.
Appetite for fresh air? You can get more information on the company,
the intelligent technology of Pluggit comfort ventilation systems,
references and regional contacts at
www.pluggit.com or as an on-line dialogue at www.lueftungsblog.de
The air conduct being installed invisibly in the floor and an ideal
positioning of the air outlets make for perfectly aligned transverse
ventilation. Displacement ventilation means that the fresh air is
supplied to the room almost without causing any draughts and
disturbing noise, without pressure and preheated during the
cold months.
Fresh air and heat supply in one - quicker, more flexible and more
energy saving than common heating systems.
allfloor – in ceilings, walls, above or under concrete and screed -
the Pluggit system design offers maximum flexibility with regard to
the installation of the ventilation ducts and thus is ideal for the use
in new buildings as well as for the refurbishment of
existing buildings.
This innovative technology allows for the supply of exactly the
required or desired amount of fresh air thanks to a highly sensitive
sensor system and control. Cost and time saving, the unit adapts to
the system characteristics at the touch of a button after the
installation and automatically calibrates itself consistently at
regular intervals.
Energy efficiency - a high heat supply rate alone makes a ventilation
system seem effective and energy efficient only at first glance.
The decisive factor for an assessment is rather the ratio of the
energy spent to the attained heat recovery rate - the so-called
electrical energy efficiency. Due to a high tightness, a consumption-
optimised device design and the latest heat exchanger technology,
our ventilation systems attain excellent ratings in terms of heat
recovery and energy efficiency.
The CleanSafe principle guarantees a very low pollution potential of
our distribution system due to smooth surfaces and a trouble-free
cleaning concept, the convincing results of which have been
confirmed by an independent testing institute.
Appetite for fresh air in your building?
The unique comfort ventilation system for the energetic
refurbishment of existing buildings.
2Q
allfloor
ServoFlow
CleanSafe

1
OI remote control for Pluggit Avent
1. General safety information ............................................................................................................... 3
2. General notes ................................................................................................................................... 3
2.1. Intended use ...................................................................................................................................... 3
2.2. Unintended use .................................................................................................................................. 3
2.3. Warranty ............................................................................................................................................. 3
3. Operation .......................................................................................................................................... 3
3.1. Overview ............................................................................................................................................. 3
3.1.1. Shortcuts navigation button .................................................................................................... 5
3.2. Syncronising the remote control ....................................................................................................... 5
3.3. Setting the time .................................................................................................................................. 6
3.4. Switching on/off preset weekly programme or automatic programme ........................................... 6
3.4.1. Operating parameters weekly programmes .......................................................................... 7
3.5. Selecting ventilator level manually ................................................................................................. 13
3.6. Switching on/off holiday mode ........................................................................................................ 13
3.7. Setting, switching on/off night setback ........................................................................................... 13
3.8. Switching on/off the fire booster ..................................................................................................... 14
3.9. Setting/switching on baypass (optional) .......................................................................................... 14
3.9.1. Setting automatic bypass ...................................................................................................... 14
3.9.2. Manually switch on and off bypass ....................................................................................... 14
3.10. Reset filter alarm ........................................................................................................................... 15
3.11. Switching on/off installer menu .................................................................................................... 15
3.11.1. Switching on installer menu ............................................................................................... 16
3.11.2. Readout software versions .................................................................................................. 16
3.11.3. Readout rotational speeds of supply and exhaust ventilators ........................................... 16
3.11.4. Reading out/setting set points of the preheating(optional) ................................................ 16
3.11.5. Setting temperatures for the bypass (optional) .................................................................. 17
3.11.6. Setting sensitivity of the humidity sensor (optional) .......................................................... 17
3.11.7. Setting the sensitivity of the VOCs sensor (optional) .......................................................... 17
3.12. Troubleshooting ............................................................................................................................. 18
3.12.1. Errors .................................................................................................................................. 18
3.12.2. Error codes .......................................................................................................................... 18
4. Technical data ................................................................................................................................. 19
5. Decommissioning/disposal ............................................................................................................. 19
5.1. Decommissioning in cas of dismantling ......................................................................................... 19
5.2. Packaging ......................................................................................................................................... 19
5.3. Old appliance ................................................................................................................................... 19
TABLE OF CONTENTS

2OI remote control for Pluggit Avent
1. Consignes générales de sécurite .................................................................................................... 21
2. Consignes générales ....................................................................................................................... 21
2.1. Utilisation conforme ........................................................................................................................ 21
2.2. Utilisation non conforme ................................................................................................................. 21
2.3. Garantie ............................................................................................................................................ 21
3. Commande ...................................................................................................................................... 21
3.1. Apercu .............................................................................................................................................. 21
3.1.1. Raccourci de la touche de navigation ................................................................................... 23
3.2. Synchronisation de la télécommande ............................................................................................. 23
3.3. Réglage de l’heure ........................................................................................................................... 24
3.4. Activation et désactivation d’un programme hebdomadaire ou automatique prédéfini ................ 24
3.4.1. Paramètres de fonctionnement concernant les programmes hebdomadaires .................. 25
3.5. Sélection manuelle du niveau de ventilation ................................................................................... 31
3.6. Activation et désactivation du mode vacances ................................................................................ 31
3.7. Réglage/activation et désactivatiom de l’abaissement de nuit ...................................................... 31
3.8. Activation et désactivation de l’amplificateur de combustion ........................................................ 32
3.9. Activation et désactivation du bypass (disponible en option) .......................................................... 32
3.9.1. Réglage du bypass automatique ........................................................................................... 32
3.9.2. Activation et désactivation manuelles du bypass ................................................................. 32
3.10. Réinitialisation de l’alarme des filtres .......................................................................................... 33
3.11. Activation et dèsactivation du menu d’installateur ....................................................................... 33
3.11.1. Activation du menu d'installateur ....................................................................................... 34
3.11.2. Lecture des versions logicielles ......................................................................................... 34
3.11.3. Lecture des vitesses de rotation des ventilateurs d'air frais et d'air vicié ........................ 34
3.11.4. Lecture et réglage des valeurs de consigne du préchauffage (disponible en option) ....... 34
3.11.5. Réglage des températures pour le bypass (disponible en option) ..................................... 35
3.11.6. Réglage de la sensibilité du capteur d'humidité (disponible en option) ............................ 35
3.11.7. Réglage de la sensibilité du capteur COV (disponible en option) ....................................... 35
3.12. Dépannage ..................................................................................................................................... 36
3.12.1. Dysfonctionnements ............................................................................................................ 36
3.12.2. Codes d'erreur ..................................................................................................................... 36
4. Données techniques ........................................................................................................................ 37
5. Mise hors service/élimination ........................................................................................................ 37
5.1. Mise hors service lors du démontage ............................................................................................. 37
5.2. Conditionnement .............................................................................................................................. 37
5.3. Appareil usagé ................................................................................................................................. 37
SOMMAIRE

3
OI remote control for Pluggit Avent
English
2.1. INTENDED USE
The remote control is intended for controlling the
Avent P190/P310/P460 room ventilation units. The latter
has a wireless connection with the room ventilation system.
The range is approx. 30 m. It even reaches through floors
and light ceiling constructions.
Up to five remote controls can be connected to one room
ventilation unit. All connected remote controls are on an
equal footing. Thus, the last change of the operating mode
or of a set point is always taken over.
To ensure easy accessibility, the remote control should be
placed on a shelf or fixed to a wall in the kitchen or in the
living room.
The power save function of the remote control switches off
the display after 2 minutes. When pressing the navigation
button it switches on again.
2.2. UNINTENDED USE
Any use of the remote control other than that described in
"Intended use" shall not be permissible.
2.3. WARRANTY
In order to preserve your full statutory warranty claim, the
technical guidelines in these operating instructions must be
observed.
3.1. OVERVIEW
1Remote control
2Navigation button
3Ventilator levels 1-4
The current ventilator level is always displayed.
1. GENERAL SAFETY INFORMATION
Warning:
The following safety instructions must be observed,
since damage and injury may otherwise result:
zPlease read these operating instructions care-
fully before starting to operate the remote con-
trol.
zDamages resulting from inappropriate storage
of the product, improper handling or unintended
use are excluded from any liability.
zTechnical changes reserved.
2. GENERAL NOTES
3. OPERATION
• Selection of a menu item
• Confirmation of a setting
Switch between menu items
Increase or decrease default
values
Die Wohnraumlüftung
M
O
T
U
W
E
T
H
F
R
S
A
S
U
RH%
6 1
2345T4T2
7 T1T5T3
M+P-26A-0943

4OI remote control for Pluggit Avent
4Info line
5Time/weekday
Controlling the week timer and night setback
6Operating modes
7Operating data
• Outdoor temperature (T1)
• Supply air temperature (T2)
• Exhaust air temperature (T3)
• Outgoing air temperature (T4)
• Indoor air temperature (T5)
Alarm
Room ventilation unit error in connection
with the display of an error code.
Information on functions, programmes and
error codes
A1 Automatic programme
P1, P2... Weekly programme
BYP6, BYP5...Manual bypass switched on.
FP7, FP6... Fire booster switched on
DEF Defrost function
E1, E2... Error codes
Niedriger Batteriestatus
Automatic programme
Manually select ventilator level
Selecting weekly programme
Switching on/off holiday mode
Switching on/off night setback
Filter change
Reset filter alarm
Relative air humidity of the exhaust air
(optional)
A humidity sensor must be installed and the
automatic mode must be switched on to con-
trol the room ventilation unit depending on the
relative air humidity.
<24 % relative humidity
Very dry air, ventilator level 1
25-34 % relative humidity
Dry air, ventilator level 1
35-45 % relative humidity
Comfort range, ventilator level 1-3
46-65 % relative humidity
Comfort range, ventilator level 3
>66 % relative humidity
Humid air, ventilator level 3
VOC content of the air
(optional)
A VOC sensor must be installed and the auto-
matic mode must be switched on to control
the room ventilation unit depending on the
VOC content.
<600 ppm
Clean air, ventilator level 1
600-850 ppm
Clean air, ventilator level 1-2
850-1100 ppm
Sufficient air quality, ventilator level 2-3
1100-1200 ppm
Sufficient air quality, ventilator level 3
1200-1600 ppm
Slightly polluted air, ventilator level 3
>1600 ppm
Polluted air, ventilator level 4
Preheat temperature
(optional)

5
OI remote control for Pluggit Avent
English
3.1.1. Shortcuts navigation button 3.2. SYNCRONISING THE REMOTE CONTROL
1. Disconnect all poles of the room ventilation unit from
the power supply system.
2. Remove the cover (1) and insert the supplied batteries
(2x AAA).
3. Replace cover (1).
4. Reconnect all poles of the room ventilation unit to the
power supply system.
A connection between the remote control and the room
ventilation system will be established within 60 seconds.
The operating data appears on the display (2).
5. To reset the remote control, hold down button (3) at the
left for approx. 10 seconds until the display and all sym-
bols on the display (2) start flashing.
The remote control is ready for a new synchronisation.
Press centre of the button for approx.
3 seconds to exit a menu and to switch
to the default display
Press bottom of button for approx.
5 seconds to switch on/off bypass (ac-
cessory) for 6 hours, see page 13.
Press top of the button for approx.
5 seconds to switch on the fire booster
(accessory) for 7 minutes, see page 13.
Press button at the right for approx.
10 seconds to switch on the installer
menu, see page 14.
Press button at the right for approx.
10 seconds to reset the remote control.
Hold down the top left of button for ap-
prox. 10 seconds to reset all settings
and set points to factory settings.
Only possible in the installation menu.
Note:
It is also possible to establish a constant power supply
using a mini USB cable (accessory). The connector is lo-
cated on the back of the remote control behind the
cover (1).
1
M+P-26A-0966
Die Wohnraumlüftung
RH%
2 3
M+P-26A-0967

6OI remote control for Pluggit Avent
3.3. SETTING THE TIME
1. Press the centre of button (1) to activate the operating
mode line. The current operating mode flashes
2. Press button (1) at the right until the hands of the
clock (2) start flashing.
3. Press the bottom of button (1) and the current time
starts flashing on the display (3).
4. Hold down top or bottom of button (1) until the time is
set.
5. Press centre of button (1).
The setting is saved and the weekday (4) starts flashing.
6. Press top or bottom of button (1) until the weekday (4) is
set.
7. Press centre of button (1).
The setting is saved.
3.4. SWITCHING ON/OFF PRESET WEEKLY
PROGRAMME OR AUTOMATIC PROGRAMME
You can choose between a total of 10 preset weekly pro-
grammes or one automatic programme (freely selectable).
In automatic mode the room ventilation unit automatically
switches between the different ventilator levels. The room
ventilation unit maintains the air quality with regard to the
relative air humidity and the VOC content at the same the
same level of comfort.
In high humidity the demand increases and the room venti-
lation unit switches to ventilator level 3.
In low humidity the room ventilation unit turns to
ventilator level 1.
If a humidity sensor (accessory) and a VOC sensor (acces-
sory) are installed, the room ventilation unit turns to
ventilator level at high VOC levels.
In the preset weekly programme the ventilator levels
change depending on the stored times, see page 7.
Automatic programme
1. Press the centre of button (1) to activate the operating
mode line. The current operating mode flashes.
2. Repeatedly press button (1) at the right until the
display (2) illuminates.
The ventilator level (3) which has just been set will be
displayed.
3. Press centre of button (1).
The setting is saved.
Preset weekly programme
1. Press the centre of button (1) to activate the operating
mode line. The current operating mode flashes.
2. Repeatedly press button (1) at the right until the
display (2) starts flashing.
The current weekly programme (3) is displayed.
3. Press the bottom of button (1).
The weekly programme (3) starts flashing.
4. Press top or bottom of button (1) until the desired
weekly programme (3) is selected.
5. Press centre of button (1).
The settings are saved.
Note:
One preset weekly programme or the automatic pro-
gramme must be selected when commissioning the
unit. For further information, please refer to the oper-
ating and installation instructions of the room ventila-
tion unit.
Die Wohnraumlüftung
RH%
2
43
1
M+P-26A-0968
Die Wohnraumlüftung
RH%
2
3
1
M+P-26A-0969
Die Wohnraumlüftung
RH%
2
3
1
M+P-26A-0970

7
OI remote control for Pluggit Avent
English
3.4.1. Operating parameters weekly programmes
The weekly programmes 1-10 are preset with the following
operating parameters as default:
Weekly programme P1
Family with children, both parents work during the day.
Weekly programme P2
Family with children, both parents work during the day.
During lunchtime all are absent.
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1

8OI remote control for Pluggit Avent
Weekly programme P3
Family with children, one parent works during the day.
Weekly programme P4
Family with children, both parents stay at home.
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1

9
OI remote control for Pluggit Avent
English
Weekly programme P5
Small family/couple without children, both work during
the day.
Weekly programme P6
Small family/couple without children, both work at night.
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1

10 OI remote control for Pluggit Avent
Weekly programme P7
Small family/couple without children, both work
at weekends at night.
Weekly programme P8
Single person, works during the day.
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1

11
OI remote control for Pluggit Avent
English
Weekly programme P9
Single person, works at night.
Weekly programme P10
Single person, works at weekends.
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1

12 OI remote control for Pluggit Avent
Weekly programme P11
The freely selectable programme can be individually ad-
justed when commissioning the unit. The operating param-
eters are to be marked in these tables accordingly.
Note:
The user can adjust the operating parameters using the
Pluggit iFlow and the app.
For further information on Pluggit iFlow, please refer to
the operating and installation instructions of the room
ventilation unit.
Monday-Friday
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1
Weekend
Time /
level
0
-
1
1
-
2
2
-
3
3
-
4
4
-
5
5
-
6
6
-
7
7
-
8
8
-
9
9
-
10
10
-
11
11
-
12
12
-
13
13
-
14
14
-
15
15
-
16
16
-
17
17
-
18
18
-
19
19
-
20
20
-
21
21
-
22
22
-
23
23
-
24
4
3
2
1

13
OI remote control for Pluggit Avent
English
3.5. SELECTING VENTILATOR LEVEL MANUALLY
You can choose between ventilator level 0-4.
The ventilator level 0 is a stand-by mode and can be turned
on for a maximum of 1 hour.
The ventilator level can only be turned on for a maximum of
4hours.
After the time has expired, the room ventilation unit auto-
matically switches back to the last operating mode.
1. Press the centre of button (1) to activate the operating
mode line. The current operating mode flashes.
2. Repeatedly press button (1) at the right until the
display (2) illuminates.
3. Press centre of button (1).
4. Repeatedly press button (1) at the right until the desired
ventilator level (3) is selected.
3.6. SWITCHING ON/OFF HOLIDAY MODE
During periods when the building is unoccupied and is not
used for other purposes, the holiday mode can be switched
on.
In holiday mode, the room ventilation unit runs at a min-
imum level. This means that 2/3 of the time
ventilator level 1 (protection against moisture) and 1/3 of
the time ventilator level 0 are switched on.
Switching on
1. Press the centre of button (1) to activate the operating
mode line. The current operating mode flashes.
2. Repeatedly press button (1) at the right until the
display (2) illuminates.
Switching off
Press the centre of button (1).
The display (2) turns off.
3.7. SETTING, SWITCHING ON/OFF NIGHT SETBACK
With the night setback switched on, the room ventilation
unit runs at ventilator level 1.
This feature can be switched on and off with the automatic
programme, when manually operated and with the preset
weekly programme.
Switching on
1. Press the centre of button (1) to activate the operating
mode line. The current operating mode flashes.
2. Repeatedly press button (1) at the right until the
display (2) starts flashing.
3. Press centre of button (1).
The setting is saved.
Die Wohnraumlüftung
RH%
2 1
3
M+P-26A-0971
Die Wohnraumlüftung
RH%
2 1
M+P-26A-0972
Warning:
Switch off holiday mode as soon as the building is
used again, otherwise moisture damage may
result.
Note:
The holiday mode is automatically switched off after
28 days. The room ventilation unit automatically
switches back to the last operating mode.
Die Wohnraumlüftung
RH%
2 1
3
M+P-26A-0973

14 OI remote control for Pluggit Avent
Setting the period
1. With the night setback switched on, press the bottom of
button (1).
The display (3) starts flashing and the starting time can
be set.
2. Press top or bottom of button (1) until the desired
starting time is selected.
3. Press centre of button (1).
The setting of the starting time is saved and the end time
appears on the display (3).
4. Press top or bottom of button (1) until the desired end
time is selected.
5. Press centre of button (1).
The setting of the end time is saved.
Switching off
Press centre of button (1).
The display (2) turns off.
3.8. SWITCHING ON/OFF THE FIRE BOOSTER
When initiating a fireplace, such as a fireside, the fire
booster can be switched on.
With the fire booster switched on, the supply air ventilator is
set to level 3. The room ventilation unit operates at the
nominal volume flow rate. The supply air ventilator oper-
ates at a speed of 100 % and the exhaust air ventilator at a
speed of 50 %.
If the supply air temperature (T2) falls below 9 °C before the
period of 7 minutes has expired, the room ventilation unit
automatically switches back to the last operating mode. The
unit operates again at the speed of the previous operating
mode.
Hold down the top of button (1) for approx. 5 seconds until
FP7 appears on the display (2).
The fire booster will be switched on for 7 minutes and the
display (2) counts down (FP6...FP01).
After the time has expired, the room ventilation unit auto-
matically switches back to the last operating mode.
3.9. SETTING/SWITCHING ON BAYPASS (OPTIONAL)
The bypass is available as an accessory. It allows bypassing
the heat exchanger and thus, the cooler outside air is not
heated.
There are two versions of the bypass available.
• Version A is an exhaust air bypass. The exhaust air by-
passes the heat exchanger and thus, the supply air is not
heated.
• Version B is a supply air bypass. The supply air bypasses
the heat exchanger and thus, the supply air is not
heated.
3.9.1. Setting automatic bypass
The automatic bypass can be used at night in summer for
example. The outside temperature must be higher than
15 °C , but must be lower than the room air temperature.
In the installer menu, the temperatures can be set from
Tmin and Tmax, see page 17.
Tmin indicates the lower operating limit for the functioning
of the bypass. Thus, any draughts in the rooms and conden-
sate formation are avoided.
Tmax indicates the functioning of the bypass with regard to
the exhaust air temperature at which the bypass opens for
cooling (summer mode).
The bypass is automatically activated when:
• the outside air is 2 °C lower than the supply air and
•T
min is exceeded and
•T
max is exceeded.
3.9.2. Manually switch on and off bypass
At lower outside temperatures, e.g. in spring or autumn, the
building can be cooled down by manually switching on the
bypass, without a heat recovery being used.
The bypass will then be activated for 6 hours, as long as the-
temperature difference of 2 °C between of the outside air
and the supply air continues to be present.
Die Wohnraumlüftung
RH%
2
1
M+P-26A-0974
Note:
The fire booster cannot be operated at outside tempera-
tures below -13 ° C. For this purpose, installing a pre-
heating is required (accessory).

15
OI remote control for Pluggit Avent
English
Hold down the bottom of button (1) for approx. 5 seconds
until BYP6 appears on the display (2).
The room ventilation unit cools for 6 hours and on the
display (3) the air ducts run in parallel.
After the time has expired, the room ventilation unit auto-
matically switches back to the last operating mode.
3.10. RESET FILTER ALARM
Thanks to the integrated filter the supplied outside air and
exhaust air is cleaned of dirt particles and soiling of the unit
is avoided.
If the room ventilation unit is operated without a filter, the
hygiene requirements are not met.
The filter alarm must be reset after each filter change.
The black triangles on display (1) show the remaining useful
life of the filter. If all triangles are completely black, the
display (1) flashes and the filters must be replaced.
1. Press the centre of button (2) to activate the operating
mode line. The current operating mode flashes.
2. Repeatedly press button (2) at the right until the
display (1) starts flashing.
The display (3) shows e.g. -25. This means that there are
25 days left until the filter change is due.
3. Press the bottom of button (2).
The preset interval value for the filter change flashes on
the display (3), e.g. 360.
4. Press top or bottom of button (2) until the desired in-
terval value for the filter change is reached.
5. Press centre of button (2).
The setting is saved.
3.11. SWITCHING ON/OFF INSTALLER MENU
In the installer menu, the following values and settings can
be displayed and adjusted:
• Readout the software version of the room ventilation
unit, the remote control and the accessories
• Readout rotational speed of the supply air ventilator
• Readout rotational speed of the exhaust air ventilator
• Readout set points of the preheating (accessory)
• Adjust set points of the preheating (accessory)
• Readout temperatures from Tmin and Tmax for the by-
pass (accessory)
• Set temperatures from Tmin and Tmax for the bypass (ac-
cessory)
• Set sensitivity of the humidity sensor (accessory)
• Set sensitivity of the VOC sensor (accessory)
Note:
For further information on replacing the filters, please
refer to the operating and installation instructions of the
room ventilation unit.
Die Wohnraumlüftung
RH%
2 3
1
M+P-26A-0975
Die Wohnraumlüftung
RH%
1
M+P-26A-0976
Warning:
The installer menu must only be used by qualified
expert personnel, otherwise damage may result.
Die Wohnraumlüftung
RH%
3
21
M+P-26A-0977

16 OI remote control for Pluggit Avent
3.11.1. Switching on installer menu
Hold down button (1) at the right for approx. 10 seconds
until the displays (2) and (3) start flashing and the
ventilator level 3 (4) appears.
The installer menu remains active for one hour or until you
press the button (1) again for 10 seconds.
3.11.2. Readout software versions
1. Switching on installer menu, see page 16.
2. Press button (1) at the left.
The display (2) shows the software version of the room
ventilation unit.
3. Press the bottom of button (1).
The display (2) shows the software version of the remote
control.
4. Press the bottom of button (1).
The display (2) shows the software version of an acces-
sory.
If you have more than one accessory installed, press the
bottom of button (1) again.
5. Hold down button (1) at the right for approx. 10 seconds.
The installer menu is closed.
3.11.3. Readout rotational speeds of supply and exhaust
ventilators
1. Switching on installer menu, see page 16.
2. Press button (1) at the right until the display (2) and the
supply air duct (3) start flashing.
The rotational speed of the supply air ventilator appears
on display (4).
3. Press the bottom of button (1) until the display (2) and
the exhaust air duct (5) start flashing.
The rotational speed of the exhaust air ventilator ap-
pears on display (4).
4. Hold down button (1) at the right for approx. 10 seconds.
The installer menu is closed.
3.11.4. Reading out/setting set points of the preheating
(optional)
1. Switching in installer menu, see page 16.
2. Press button (1) at the right until the display (2) and the
temperature (3) start flashing.
3. Press centre of button (1).
4. Press top or bottom of button (1) until the desired set
point is reached.
5. Press centre of button (1).
The setting is saved.
6. Hold down button (1) at the right for approx. 10 seconds.
The installer menu is closed.
Die Wohnraumlüftung
RH%
2 3
4
1
M+P-26A-0978
Die Wohnraumlüftung
RH%
2
1
M+P-26A-0979
Die Wohnraumlüftung
RH%
4 2 3
15
M+P-26A-0981
Die Wohnraumlüftung
RH%
2
13
M+P-26A-0982

17
OI remote control for Pluggit Avent
English
3.11.5. Setting temperatures for the bypass
(optional)
1. Switching on installer menu, see page 16.
2. Press button (1) at the right.
The set points for the outside air temperature T1 (2) and
the exhaust air temperature T3 (3) start flashing.
3. Press centre of button (1).
The set point for T1 (2) flashes quicker.
4. Press top or bottom of button (1) until the desired set
point (8-15 °C) is reached.
5. Press centre of button (1).
The setting is saved and the set point for T3 (3) flashes
quicker.
6. Press top or bottom of button (1) until the desired set
point is reached.
7. Press centre of button (1).
The setting of the set point is saved and the new set
points for T1 (2) and T3 (3) are displayed.
8. Hold down button (1) at the right for approx. 10 seconds.
The installer menu is closed.
3.11.6. Setting sensitivity of the humidity sensor
(optional)
If a humidity sensor (accessory) is used, the sensitivity can
be adjusted for the automatic programme.
If the set point for the relative air humidity is set too low, this
may cause impairments of the inhabitants' well-being and
may cause certain materials in the building to dry out.
However, if the set point is set too high, this may cause
moisture damage in the structure of the building and may
as well impair the inhabitants' well-being.
1. Switching on installer menu, see page 16.
2. Press centre of button (1).
The most recently selected automatic programme (2)
flashes.
3. Press centre of button (1). The most recently selected
set point (3) will flash.
4. Press top or bottom of button (1) until the desired set
point is reached.
5. Press centre of button (1).
The setting is saved.
6. Hold down button (1) at the right for approx. 10 seconds.
The installer menu is closed.
3.11.7. Setting the sensitivity of the VOCs sensor
(optional)
If a VOC sensor (accessory) is used, the sensitivity can be
adjusted for the automatic programme using the
Pluggit iFlow.
Die Wohnraumlüftung
RH%
123
M+P-26A-0983
Note:
For further information on handling the Pluggit iFlow,
please refer to the operating and installation instruc-
tions of the room ventilation unit.
Low sensitivity
Degree of pollution (ppm) 600 900 1200
Medium sensitivity
Degree of pollution (ppm) 550 800 1000
High sensitivity
Degree of pollution (ppm) 500 750 800
Die Wohnraumlüftung
RH%
2
13
M+P-26A-0980

18 OI remote control for Pluggit Avent
3.12. TROUBLESHOOTING
3.12.1. Errors
3.12.2. Error codes
Error
Synchronising the remote control no longer functions.
Cause Correction
The distance to the control unit of the room ventilation
system is too great.
Reduce distance.
The remote control has already been synchronised with an-
other room ventilation unit.
Reset remote control, see page 5.
Note:
If an error code is displayed, contact the customer
service of the specialised company.
Code Alarm/error
E1 Exhaust air ventilator
E2 Supply air ventilator
E3 Bypass flap
E4 Outdoor air temperature sensor (T1)
E5 Supply air temperature sensor (T2)
E6 Exhaust air temperature sensor (T3)
E7 Outgoing air temperature sensor (T4)
E8 Indoor air temperature sensor (T5)
E9 Humidity sensor (accessories)
Is located in the exhaust air duct of the room ventilation unit
E10 Outdoor temperature <-13 °C
E11 Supply air temperature <15 °C
E12 Fire alarm if one the temperature sensors measures a temperature above 70 °C.
E13 Communication error
E14 Fire alarm, triggered by the fire detector (accessory) installed in the duct
E15 VOCs sensor (accessories)