PLUS Vision magicolor plus User manual

Software Operation Manual
We greatly appreciate your purchase of this PLUS Vision product.
In order to take full advantage of the features of the software supplied
with the Captureboard C-12, please read this software operation manual carefully before use.
After reading, be sure to keep the manual for future reference.
Captureboard C-12 Series

E-2
Trademarks
* Microsoft and Windows are registered trademarks or trademarks of the Microsoft Corporation in the United States and other
countries.
* Adobe and Adobe Acrobat Reader are trademarks of Adobe Systems Incorporated.
Due respect will be afforded to the trademarks of the various companies and to product trademarks even when not expressly
noted.
In addition, product names and company names contained in this manual are registered trademarks or trademarks of the
respective companies.
(1) The contents of this manual may not be reprinted in part or whole without permission.
(2) The contents of this manual are subject to change without notice.
(3) Great care has been taken in the preparation of this manual; however, should any questionable points, errors, or omissions
be apparent, please contact us.
(4) Notwithstanding part (3), PLUS Vision Corp. will not be responsible for any claims or lost profits or other matters deemed to
be the result of using this unit.
(5) The separately sold printer is designed to be used as a peripheral device for a PLUS Captureboard. The printer is not guar-
anteed to operate when connected directly to a computer.
(6) Manuals with incorrect collating or missing pages will be replaced.
Table of Contents
Introduction............................................................................................. E-3
What is Captureboard Soft PLUS TOOLBOX? ........................................................ E-3
Operating Environment ............................................................................................ E-3
Copyright and License ............................................................................................. E-4
Connection to the Computer ................................................................. E-5
Description of the included CD-ROM’s menu screen (C-12 setup launcher)........... E-5
Installation of the Software.................................................................... E-6
Check Prior to Installation ........................................................................................ E-6
Installation of the PLUS TOOLBOX ......................................................................... E-6
Uninstallation of the PLUS TOOLBOX..................................................................... E-8
Menu Screen Names and Functions..................................................... E-9
Menu ........................................................................................................................ E-9
Superimposed Image Display Screen.................................................................... E-11
Basic Operation.................................................................................... E-13
Superimposing captured images............................................................................ E-13
Fine Adjustment of the Captured Image ................................................................ E-17
Capture Settings................................................................................... E-18
Hardware Setup .................................................................................... E-20
Creation and Editing of Headers/Footers .......................................... E-23
Names and Functions of the Screen Parts ........................................................... E-23
Creating a New Header/Footer .............................................................................. E-26
Updating the Internal Header/Footer Information of the Captureboard.................. E-29
Update the Captureboard’s Internal Program.................................... E-31
About the security settings ...................................................... Rear cover

E-3
Introduction
What is Captureboard Soft ?
PLUS TOOLBOX allows the user to capture the captureboard's scanned data as an image using a TWAIN driver
then superimpose this over a projector's projected image on the computer and store this as image data.
There is also a function for positioning the projector's projected image and the captureboard's scanned data eas-
ily and automatically by detecting the projector's projection position information marked on the captureboard's
sheet surface.
Furthermore, PLUS TOOLBOX allows the user to set the captureboard's operating environment and security
settings from the computer and create headers/footers that can be stored on the captureboard.
* In this manual, TOOLBOX may be referred to as "this software" or "the software", and the captureboard may be referred to
as "main unit", this unit" or "the unit".
Notice
• This software is designed to store records of meetings. It may not reproduce and store accurate colors or image quality.
Also note that the capture data automatic positioning function is not something that guarantees an accurate positioning
operation.
• The "PLUS TOOLBOX" software is a unified program for copyboards (including captureboards).
* Superimposing the scanned data over the projector's projected image is possible when used in combination with a
captureboard.
Operating Environment
Supported OS: Microsoft Windows 2000 Professional (Service Pack 4 or higher) /
XP (Home Edition /Professional Edition Service Pack 2 or higher) /
Vista (32 bit version)
Supported PC: IBM PC/AT fully compatible computers that run the aforementioned OS
CPU: Pentium III 1.2GHz or greater
Memory: Windows 2000 (128 MB or greater),
Windows XP (256 MB or greater),
Windows Vista (512 MB or greater)
Connector: USB port (type A), interface compatible with USB 1.1 and USB 2.0 standards.
Available hard disk space: 40 MB or greater (not including space for storing images)
Display resolution: 800 x 600 pixels or greater
Peripheral devices: CD-ROM drive, standard USB ports
Web browser: Internet Explorer 6.0 or higher
• All operations are not guaranteed in the aforementioned operating environment.
• Windows 95, 98SE/Me, NT, 2000 Server, Server 2003, and Vista (64 bit version) are not supported.
Notice
ABCD
EFGH
xyz
ABCD
EFGH
xyz
ABCD
EFGH
xyz
Captureboard
Personal Computer
Projector
Store on a hard disk drive, etc.
Superimpose images
with this software

E-4
Introduction
Copyright and License
◆Copyright
PLUS Vision Corp. (hereafter called We) holds the copyright of this software and related works which are pro-
tected by Japan’s Copyright Law and international treaties.
Copyright © Since 2008 PLUS Vision Corp. All rights reserved.
The PLUS TOOLBOX and header/footer software uses fonts supplied by Information-Technology Promotion
Agency, Japan. The text file of the supplied CD-ROM is a user license agreement for the use of the software.
Only use this software after carefully reading and consenting to the software user license agreement.
* Check the text file in the supplied CD-ROM: “General User’s IPA Font User License Agreement”.
◆Disclaimer
We shall not be responsible in any way for direct or indirect damages that may arise from this software or
products derived from related software. We shall not be responsible in any way for damages as a result of the
machine or medium. Furthermore, We shall not be responsible in any way that may relate to the effects of the
results of using this software.
◆Terms of Use and Terms of Distribution
• We shall not be responsible in any way for any kind of damages arising from the use or inoperability of this
software.
• We shall not be liable in any way for support of this software, any kind of warranty, correction of trouble or con-
tinuation of version upgrades, etc.
• Provided that you consent to the aforementioned matters, you shall be permitted to use the software for non-
profit purposes for personal use and use within a company.
• When “this software” is mentioned, it refers not only to the executable file, but to all of the component files
including Help and appended text.
◆Support
We call support the provision of all kinds of information including answers to questions, requests, trouble reports,
and other matters, and the scope of our support shall be limited to the functions and operation of this software.
Problems that arise in using this software cross many paths including those attributable to the personal com-
puter, the OS, other application software, and other peripheral devices. Accordingly, we only support problems
that are attributable to this software. Also, this software is subject to version upgrades without prior notice due to
the technical advancement of hardware and software. The customer can receive and use upgraded versions of
this software through a method determined by us. Note that version upgrades will be limited to customers who
consent to the aforementioned conditions of use.
* Upon downloading this software from the PLUS Vision Web site, or installing it from the CD-ROM, the cus-
tomer is deemed to have consented to each of the terms.

E-5
Connection to the Computer
The Captureboard must be connected with a computer in order to use this software.
• Do not connect this machine to the personal computer before installing the software.
• Do not connect more than one Captureboard to one personal computer.
Notice
PRINTER PC
To the RGB input connector of
the projector
To the RGB output (Display) connector
of the personal computer
To the personal computer
USB port (Type A)
To the PC dedicated
USB port (Type B)
RGB Input
Monitor Output
USB
Personal Computer
Projector
USB cable supplied with the unit
Captureboard
Description of the included CD-ROM’s menu screen (C-12 setup launcher)
The menu screen is displayed automatically when the included CD-ROM is inserted into the computer’s CD-
ROM drive.
■Installation of software
When clicked, the installer is launched and the “PLUS
TOOLBOX”, TWAIN driver and USB driver are installed
simultaneously.
■User’s Manual
When clicked, the User’s manual (in PDF format) open.
■Software Manual (this manual)
When clicked, the PLUS TOOLBOX software’s operating
instructions (in PDF format) open.
■Acrobat Reader
This is an application for viewing files in PDF format.
If the PDF files cannot be opened, click “Acrobat Reader” on the menu and follow the instructions on the screen to
install.
* Browse CD
Click this to view the contents of the CD-ROM using the computer’s Explorer application.
* Copyright & Usage
Click this to open the copyright, usage conditions and other information.
This is a representative example of personal computer and projector connections. Please see the manuals of your per-
sonal computer and projector for details.
Note

E-6
Installation of the Software
When “Install Software” on the included CD-ROM’s menu is clicked, the “PLUS TOOLBOX”, TWAIN driver and
USB driver are installed.
Check Prior to Installation
Installation of the PLUS TOOLBOX
1. Check whether your personal computer satisfies the operating environment. (See page E-3)
2. Check that your personal computer is not currently connected to this machine via USB.
3. At the time of installation, install with Administrator rights (i.e., a user having administrator rights) for
Windows 2000, or with a Computer Administrator rights (account) for Windows XP/Vista.
4. Close all other applications that are running.
Insert the supplied CD-ROM into the CD-
ROM drive of the personal computer.
The menu screen will be displayed automatically.
If the menu screen is not displayed automatically, double
click CD-ROM icon and double click “autorun.exe”.
Click “Installation of Software”.
The installer will start.
Follow the instructions of the installer and
start the installation.
The PLUS TOOLBOX, the TWAIN driver and the USB
driver will be installed at the same time.

E-7
Installation of the Software
Note
* The Windows Security dialog box will be displayed with
Windows Vista.
Select “Install this driver software (I)”.
* When using Windows Vista, each time the installer
is started, the User Account Control dialog box is
displayed.
Select “Continue” and continue with the installation.
Click “Finish”.
The “Installer Information Dialog Box” will be displayed.
Click “Yes” and restart the personal computer.
When this software is installed on the personal computer
for the first time, continue to make the following connec-
tions and operations.
Preparation
1. Press the ON/Standby button of the Captureboard to turn on the power.
2. Use a USB cable to connect the USB port of the personal computer with the PC dedicated USB port of the
Captureboard. (See Page E-5)
The New Hardware Search Wizard will be displayed.
Install according to the New Hardware Search Wizard.
Continue on next page
■Installing the USB Driver
The USB driver is installed on the computer with the installer, but this does not complete association with the
USB port. In order to use PLUS TOOLBOX, install using the procedure described below with the Captureboard
connected.

E-8
Uninstallation of the PLUS TOOLBOX
Note
Installation of the Software
Click “Finish”.
This software can now be used.
Selecting [Start] →[Control Panel] will display the Control Panel screen.
Check that your personal computer and the Captureboard are not currently connected by USB.
Double click “Add or Remove Programs or Applications” (this will differ
depending on the OS) to display the “Add or Remove Programs Properties”
screen.
Select PLUS TOOLBOX from among the list displayed and click [Change /
Remove] to display the Add or Remove wizard screen.
Selecting the [Remove] radio button of the wizard and clicking [Next] will start
the uninstallation.
* “Add or Remove Programs” will be displayed for Windows XP/Vista.
* When using Windows Vista, each time the uninstaller is started, the User Account Control dialog box is displayed.
Select “Continue” and continue with the uninstallation.
Select “Install Software Automatically
(Recommended)” and click “Next” (when
using Windows XP).
Start the installation of the USB driver.
* Installation will be completed automatically with Windows
2000/Windows Vista.
Note

E-9
Menu Screen Names and Functions
When a computer on which the “PLUS TOOLBOX” dedicated software is installed is connected to the
Captureboard, the “PLUS TOOLBOX” main menu appears.
② 


Main menu
Menu
①Scan button
Displays the projection image superimposed screen.
Yes: Starts the capture of the image (projected by the projector) that is displayed on the personal
computer screen, and the hand drawn image of the sheet surface.
No: Starts the capture of only the hand written and drawn image of the sheet surface. There will not
be superimposing with the image projected by the projector.
(Close): Closes the projection image superimposed screen.
②Mark button
Switches the display of the positioning ○marks of the projection image.
Each click switches between “Display” and “Hide”.
The default setting is “Display”.
③Feed/Stop button
Scrolls the sheet one page to the left. When pressed while scrolling, the sheet returns to the start position.
Hardware Setup:
Set the Captureboard’s operating environment
here. See page E-20.
④Setup button
Click this to display the settings screen.
The settings screen consists of the “Hardware Setup”, “Capture Setup”, “Header/footer”, “Copyboard
Firmware Update” and “Security” tabs.
Click a tab to switch to the corresponding screen.
Notice
• To set the “Security” settings, contact you nearest PLUS Vision sales office, dealer or store.

E-10
Menu Screen Names and Functions
Copyboard Firmware Update:
Use this to update the Captureboard’s internal
program. (See page E-31.)
Header/Footer:
This is used for the creation or editing of headers and
footers. See Page E-23
(1) Select image for projection:
Selects the number of the monitor that is con-
nected to the projector.
The default setting is “Display 1”. This software
automatically searches for the number of con-
nected monitors.
(2) Select color for positioning:
Selects the color of the ○mark that detects the
position of the projection image of the projector.
Select from among No specific color selected,
Red, Green, Blue, Black. The default setting is “No
specific color selected”.
The setting contents will not be stored unless the
screen is closed by clicking the [OK] button.
(3) OK
Enters the setting.
(4) Close:
Closes the settings screen.
(1)
(2) (3) (4)
Capture Settings:
These settings are used when creating superim-
posed images. See page E-18.

E-11
Menu Screen Names and Functions
⑧
⑤ ⑥ ⑦
⑤(Help)
Click this to display the operating instructions.
⑥(Minimize)
Click this to minimize the menu screen, displaying it as an
icon on the task bar.
⑦(Close)
Click this to exit the program.
⑧Device indication
This displays the model that is currently connected.
① ③ ④
⑤
⑥⑦
⑦
⑨
⑨
⑨
⑨⑧
⑧
⑩ ⑪ ⑫
Title bar
②
Superimposed Image Display Screen
The superimposed image display screen is displayed when “Yes” is clicked on the “SCAN” button (see page E-9
section 1) and screen and the hand written and drawn image of the sheet surface is captured by the personal
computer.
①File Menu
Save (S): Overwrites and saves using the current name.
Save as (A): Saves with a different name or to a different location.
Print (P): Prints using the printer that is connected to the personal computer.
②Save Button
Saves when there is save data. Opens the save screen when there is no save data.
The default setting is “Display”.
(This illustration shows the superimposed image display screen for model C-12W.)

E-12
③Aspect Button
Switches the horizontal ratio of the superimposed image. Each press switches between “Image having same
ratio as the sheet surface” and “Image that is 3/4 size horizontally”. (Available only with Model C-12W.)
At time of saving, the image will be saved at the selected ratio.
The default setting is “Image having same ratio as the sheet surface”.
④Full Screen Display Button
Provides a full screen display of the superimposed image. Clicking on the screen will result in a return to the
original window size.
* Using the full screen display is convenient when projecting a superimposed image with the projector.
The default setting is “Window size”.
⑤Captureboard Capture Screen
Execution of the scan operation displays the handwritten image data of the captured sheet surface.
⑥Personal Computer Capture Screen
Pointers (⑦to ⑨) of the personal computer screen that is projected by the projector are displayed by left
clicking on the personal computer capture screen ⑥and hidden by right clicking.
Drag the pointers to finely adjust the size and distortion.
To move the position, drag a part other than the pointers.
⑦Horizontal Size Pointer
Corrects the size in the horizontal direction.
⑧Vertical Size Pointer
Corrects the size in the vertical direction.
⑨Affine Pointer
Corrects images that are diagonally distorted.
⑩(Minimize)
Minimizes the superimposed image display screen, and the short title bar is displayed at the upper left of the
task bar. In addition, clicking the minimize icon of the main menu when it is displayed with window size also
results in the superimposed image display screen being displayed as an icon on the task bar.
⑪(Maximize)
Each click switches the image display screen (window) between a maximized display or a display at the origi-
nal size.
⑫(Close)
Closes the superimposed image display screen.
Closing the superimposed image without saving it will cause the superimposed image to be lost.
Menu Screen Names and Functions

E-13
Basic Operation
An example is given of a method for performing a presentation in which a projector projects images onto this
machine, and the record is saved on a personal computer.
Before starting the operation, connect the various pieces of equipment and turn them on.
Project the image of the personal computer from the projector
① Operate the personal computer and prepare the documents that will be projected with the projector.
②Adjust the size, display position, and other factors of the projector image.
Please see your projector manual for information about operation.
• A full screen display (in which the image is displayed to fill the screen without the display of tool bars, etc.) is
recommended for the projection image from the personal computer. When not in a full screen display, tool bars
and other items are superimposed. Please see the manual for your personal computer or the application soft-
ware that you are using for details.
• When the screen of a personal computer is not projected from the projector, or the screen of a personal com-
puter has disappeared, change the settings of the external output of the personal computer.
In Windows, the switchover can usually be accomplished by holding down the [Fn] function key and pressing
one of the [F1] to [F12] keys. The [F1] to [F12] keys will differ depending on the manufacturer of the personal
computer.
Please see the Help menu of your personal computer for details.
• An attempt to superimpose with a projection image that has used the digital enlargement function of the projec-
tor will not result in an enlarged image.
• Set up the projector so that it is level to prevent a projection image that is on an angle. When the projection
image is on an angle, the size or position of the superimposed image might be improper. (Adjustment will be
possible with this software.)
• Project the image so that it falls within the capture range of the Captureboard.
• Please project the image at a size that is 2/3 of the vertical size of the board surface or larger.
• The size and position of the superimposed image may be off if the projector's auto keystone (auto trapezoidal
distortion correction) value is high.
Note
Making a Presentation
Use the dedicated markers to write or draw diagrams on the sheet surface (including the projected area).
When saving the superimposed image as meeting records,
do not write or draw diagrams in the four corners of the pro-
jection screen. The four corners will later be used for drawing
position detection ○marks.
Superimposing captured images

E-14
Save the Superimposed Image of the Projection Image and the Sheet Surface on the Personal Computer
Positioning Marks
When the ○marks are not displayed, click the [ ] button of the menu.
Each click of the [ ] button toggles between display and hide.
Check whether this machine and the personal computer are
properly connected. “PC” is displayed in the display window of
the main unit control panel when the equipments are properly
connected.
Note
Trace with a Marker Having the Same Color as the marks of the Projected
Four Corners
Properly draw the marks in the color of the projected marks.
• This software uses the marks drawn on the sheet surface to
position the projection image and the sheet surface.
Blurry or broken marks might not be recognized.
• Do not write or draw diagrams near the marks.
• When an image with extreme keystone distortion is projected
as is, it may not be possible to recognize the marks.
• When the marks are not drawn, the projection image will be
superimposed at the upper left.
• Content that has been drawn at the periphery of the sheet
might not be captured. Please see “Effective Reading Size” in
your Captureboard manual for details.
• Animation cannot be captured as a personal computer capture
image.
Note
Basic Operation
Connect the captureboard with the computer on
which "PLUS TOOLBOX" is installed using a USB
cable (see page E-5).
The "PLUS TOOLBOX" main menu appears on the computer's screen.
• PLUS TOOLBOX is resident in the system tray. The main menu appears
automatically when the computer is connected to the captureboard.
• The main menu can also be displayed by right-clicking the PLUS
TOOLBOX icon in the system tray and choosing "Menu".
쑗marks (by default: positioning marks with no speci-
fied color) appear in the four corners of the projector's
projected image.
To change the colors of the 쑗marks, click the Settings icon on the
main menu, then click the "Capture Settings" tag.
From "Select position detection color", select a marker color that is not used
to draw on the sheet surface.
See "Capture Settings" on page E-18.

E-15
Click the (Scan) Button of the Menu
Displays the projection image superimposed screen.
Click [Yes]
The sheet surface of the Captureboard will be scrolled, the
capture will start and be completed.
Then the hand written and drawn image will be transferred
to the personal computer.
In a little while the superimposed image display screen will
open.
When the personal computer capture image and the
Captureboard capture image are shifted on the superim-
posed image display screen, see “Fine Adjustment of the
Captured Image” on Page E-17.
If you do not want to combine the hand-drawn image on
the sheet surface with the projector's projected image, click
"No".
When "No" is clicked, the captureboard capture image pre-
view is displayed.
Click (Save) to Save
• When saving for the first time, clicking will display the personal
computer [Save as] box.
Select “Save location” “File type”, enter the file name, then click
the [Save] button.
• Select the file type ("PNG", "JPG" or "PDF") using the ▼button.
• A file name consisting of the model name, date and serial num-
ber (ex. C-12_081021_01) is displayed automatically. Change it
if necessary.
• If a file with the same name already exists, the old file is
overwritten.
• To create a new folder, click [Create new folder] or click the
icon, enter the folder name in the newly created folder, then click
[Open].
Next, select the file type, enter the file name, then click [Save].
• [Save] or [Save as] can be selected from [File] of the menu bar.
Continued on next page
Basic Operation
• Black and white is set if "Prohibit Color Mode" is set to "On" in "Machine Settings".
• Use the Density button on the main unit's control panel to set the scanning density.
• When "Header/Footer" is set to "On" in "Hardware Setup" (see page E-22), the header/footer information is dis-
played on the combined image. In this case, this information is saved and printed.
Note

E-16
Step 7 (continued)
This permits the saving of the superimposed image of the hand written and drawn image data of
the Captureboard sheet surface and the projector projection image.
Using this saved image, a meeting report or document can be created.
Printing
Printing is performed by the printer that is connected to the personal
computer.
 Select [Print (P)] from [File (F)] of pull-down menu.
The printing settings screen will open.
 Clicking the [Print] button will print the selected image.
Clicking the [Detailed Settings] button for settings.
This screen will differ depending on the printer.
The superimposed image cannot be printed directly using
the Captureboard and the printer connected to it (which is
sold separately).
Note
Closing
Clicking (Close) will close the superimposed image dis-
play screen.
Closing the superimposed image without saving it will result
in the loss of the image.
To capture with the next sheet surface, proceed from Step
4.
Closing this Software
Clicking (Close) of the main menu will close this
software.
When PLUS TOOLBOX is running or its icon appears on the Windows task bar, and
the picture data is attempted to be captured using other TWAIN compatible applica-
tion software, below error message may pop up.
In this case, right-click the PLUS TOOLBOX icon on the task bar to quit the program
and start capturing procedure using other TWAIN compatible software.
When other TWAIN compatible applications are used to capture the picture data, while PLUS
TOOLBOX software is running, following procedure should be taken.
Notice
Basic Operation

E-17
Fine Adjustment of the Captured Image
When the positions of the personal computer captured image and the Captureboard capture image (such as writ-
ings and drawn on the board surface) differ on the Superimposed Image Display Screen, this function changes
the position or size of the personal computer capture image on the Superimposed Image Display Screen.
Superimposed Image Display Screen
This software creates on the personal computer a superimposed image of the image transferred to the personal comput-
er (that was hand written and drawn on the sheet surface of the Captureboard) and the personal computer screen (which
is the screen output for projection by the projector).
When the keystone distortion (horizontal distortion/vertical distortion) of the image projected by the projector is adjusted,
it will be slightly smaller than the output screen from the personal computer screen. (The size of the image changes
depending on the degree of distortion compensation.) This is a result of the compensation characteristics of the projector.
As a result, the position matching or image size will differ slightly. The position move adjustment or the image size adjust-
ment are used to correct this condition.
Adjusting the Image Size or Distortion
A left click on the personal computer capture image will display the pointers (in 8 locations).
Drag the pointers and adjust.
Right click to delete the pointers.
Adjusting the Display Position of the Image
Drag the personal computer capture image to the target position.
To stretch vertically
Drag the center top or bottom
pointer.
To stretch horizontally
Drag the center left or right pointer.
To stretch diagonally
Drag the pointers of the four corners.
Note
Basic Operation
Model C-12W captureboard

E-18
Click the (Settings) Icon of the Menu
The settings screen will open.
These settings perform the selection of the monitor that is connected to the projector and the selection of the ○
mark color used for position detection.
Select the Number of the Monitor that Is
Connected to the Projector that Projects to
the Captureboard
This is set when a personal computer that can accept the connec-
tion of multiple monitors and a projector are connected. There is no
need for this setting when there is only one monitor.
Clicking [▼] of the [Select image for projection] column will display a
list. Click the desired monitor number from this list.
This software automatically searches for the number of connected
monitors.
When the number of the monitor is not known, click “Screen Properties” →“Settings” →“Identification” on the
personal computer and check the number of the monitor that is connected to the projector.
Note
Change the Setting of the ○Mark Color
Used for Display Position Detection of the
Projected Image of the Projector
Clicking [▼] of the [Select color for positioning] column will display
a list.
Click the target color from among No specific color selected, Red,
Green, Blue, Black.
• When “No specific color selected” has been selected, an arbitrary marker color from among the four colors of
red, green, blue, and black can be used for drawing the positioning mark. Recognition is judged solely by the
shape of the ○mark that has been drawn with the marker.
Writing or drawing a diagram that resembles the ○mark may result in a position of the projection screen that
cannot be properly recognized.
• When one color has been selected from among “Red, Green, Blue, Black”, the same marker color as the
selected color can be used for drawing the positioning marks. Recognition is judged by the color and shape of
the ○mark that has been drawn with the marker.
Using the same color marker for writing or drawing a diagram that resembles the ○mark may result in a posi-
tion of the projection screen that cannot be properly recognized.
Note
Capture Settings

E-19
Finalizing
Click [OK] to set.
The main menu reappears if [Close] is clicked.
Capture Settings

E-20
Use this procedure to set the captureboard’s operating environment from the computer. The factory defaults are
shown below.
Setting item Description Factory default
Color Mode Color mode for scanning, Color/Black & White Black & White
Density Density for scanning, Standard/Dark Standard
Date/time setting Set of the date and time for the time stamp Japan Standard Time
File Format
Sets the format of the images stored on the USB memory
device.
JPEG/PNG/PDF
PNG
Paper Size A4/Letter A4
Aspect Ratio Sets the aspect ratio for printed images.
Original Image/Match Paper Size Match Paper Size
Erase Reminder Sheet rear surface erase reminder function: Disable/Enable Disable
Restrict color mode Setting for disabling printing/storing in the color mode Disable
Resolution
Selection of resolution for images stored in the memory and
images transferred to the computer : Standard
Standard : 1/2 the vertical/horizontal size of the scanned image
High : 1/1 the vertical/horizontal size of the scanned image
Standard
Header/footer (date/
time stamp)
Upon shipment from factory :
Writing of date/time when printing/storing : Enabled/Disabled
Original editing : Header/footer data output *
Enabled
Hardware Setup
Turn on the captureboard’s power, start up the computer, then make the USB
connections.
The “PLUS TOOLBOX” main menu appears on the computer.
Click the [Setup] button.
The [Hardware Setup] screen appears.
Click the desired item to select it.
For the radio buttons, when is clicked, it switches to
(only one radio button can be selected within each
item).
* The date/time stamp can be displayed at the user’s discretion as part of the header/footer data.
Upon shipment from the factory, only the time stamp is displayed.
●Output setting
Color Mode
This sets the color of the output image.
Color: Four colors (red, green, blue and black)
Black & White: Black only
Density
This sets the density of the output image.
If the output image is too light with the standard setting,
set to "Dark".