04 BASIC USE
After Step 4, Jack will be paired to your phone and
connected in "Receive Mode". Audio is streamed
from a phone or computer to Jack, and played from
the AUX port. Plug in headphones, wired speakers, or
anything that can play audio from an AUX cable.
Disconnecting
If no audio is playing, Jack will disconnect and turn
off after 20 minutes. To save battery, we recommend
turning Jack off manually when you're done by hold-
ing the power button for 3 seconds.
Auto Connect
When powered on, Jack will attempt to connect to
the previously connected device. If the device is
unavailable (out of range, or Bluetooth is off), Jack
will remain in pairing mode.
Volume Control
There are three ways to control Jack's volume:
1. Change the volume on your phone or computer
2. Press the volume buttons on Jack
3. Use headphones with in-line volume control
Note: Not all in-line headphones will work correctly
due to different specifications between vendors.
However, headphones shipped with Jack will work
correctly, and we have done our best to be as com-
patible as possible.
BASIC USE
