Polargos Smart gate User manual

Smart gate

2
Table of Contents
Smart gate - controlled by means of mobile devices..............................................................................3
The most important functions...........................................................................................................................................3
The Connexoon Access RTS application is compatible with the following devices....3
Kit components..................................................................................................................................................................................3
Installation of a smart gate system.............................................................................................................................. 4
Activation of the Connexoon controller................................................................................................................... 5
Downloading the Connexoon Access RTS application to a mobile phone........................... 8
Operation of the CONNEXOON ACCESS RTS control device........................................................... 10

3
• Opening and closing of the garage gate, turning of the alarm, and turning on the lighting immediately before
arriving home.
• Automatic closing after parking the car.
• Opening and closing of all the devices owned with a single tap.
Gate RTS Garage gate RTS Connected lock
RTS
Alarm RTS Lighting RTS Sockets RTS Philips Hue
lamp
Kit components
Smart gate - controlled by means of mobile devices
The most important functions
The Connexoon Access RTS application is compatible with the following devices
Easy Way 202i automatics Remote control - 2 channels
Photocells Connexoon RTS control device

4
1. Install the gate with Easy Way 202i automatics
Installation of a smart gate system
Before installation, familiarise yourself with the Safety Manual included in the INTELLIGATE
automatic gate kit.
CAUTION!
Before installing the intelligate gate check whether the remote control devices are pro-
grammed correctly. Check also whether the Easy Way 202i gate has been properly adjust-
ed to the gate sliding track.
2. Connect the control device to the main power supply and the Internet at home

5
Activation of the Connexoon controller
1. Connect to the somfy-connect.com website
Check whether the Connexoon unit and the device ensuring online access are connected
properly by means of an Ethernet cable (green LED status light).
The LED status light indicated the unit
status and the operations carried out.
Problem with online connection
Online connection available
1. Startup 2. Connection status
Stage 1
Select you country and language in
the “activate the controller” eld.
13 sek. 10 sek.
Stage 2
Choose the Connexoon option.

6
Stage 4
If a selection window appears,
choose Connexoon Access RTS
Stage 3
Enter the PIN code of your CONNEXOON
controller. The individual code is written on
the bottom of the controlling device.
Stages of activation of Connexoon Access RTS
Stage 5 Stage 6
Create your login and password. Enter your personal data

7
Check the information provided. Conrm
Stage 7 Stage 8
Reception of the conrmation e-mail
You will receive a conrmation e-mail.
In order to nish the Connexoon
controller activation, click on the
“Click here” link.
Stage 9

8
Downloading the Connexoon Access RTS application to a mobile phone
Download the Connexoon Access RTS application available for IOS and Android systems to
your mobile phone.
Enter your e-mail address and
password specied during activation
of the Connexoon controller (see
page 5-6, Activation screen).
Specify your identier. An identier
makes it possible to check which acti-
vities have been performed by means
of a mobile phone. The identier can
be changed at any moment in the
“parameters” menu available in
the history.

9
After downloading the Connexoon Access application to the mobile phone, it is necessary to accept the statement
in line with the following guidance:
1. It is necessary to accept the statement 2. Click on the question mark
Click here
Click here
Click here
3. Click the TEST button in order to check
the correctness of the connection be-
tween the device and the gate. Then
click on NEXT.
4. Select SGS 201/400/501/601 S.C. 5

10
5. Change the name from “Unknown component” to you own, e.g. Intelligate
6. Click on SAVE.
Operation of the CONNEXOON ACCESS RTS control device
1. Interface
Menu
Mode editor
Devices registered in
Connexoon
Own modes
Weather

11
2. Device control
It is possible to control a gate, garage
gate, lighting, etc. in the gray frame loca-
ted at the bottom of the interface.
Tap the icon of the device that you want
to control by moving the list to the right
or left (example: garage gate).
Tap the icon and choose the gate position: open/close, and
then tap OK
sliding gate garage door swing gate
3. Modes
Connexoon Access RTS offers 4 modes:
“Returning”, “Leaving”,
“Open all”, “Close all”.
Each of these modes can be adjusted to
one’s own needs by selecting actions to be
carried out: gate opening or closing, lighting
activation or deactivation, garage gate ope-
ning or closing.
Later the modes can be called by means of
a single button tap!
E.g. When I am returning, one tap of the
button results in the gate opening, external
lighting turning on, and garage opening.

12
Open all/Close all
When returning or leaving it is possible to close or
open the gate and/or garage gate and activate or
deactivate external lighting.
Press to customise your “Open all/Close all” mode.
Then press on the icon to customise the
Open all mode or press on the icon to
customise the Close all mode.
Select the devices you want to activate and then press
OK to conrm.

13
When leaving home, you will open the gate
by tapping a button once, and the gate
will close automatically after the time you
specied.
Leaving
Mark the devices for which actions
are to be performed when leaving.
Specify the duration for which you
want to perform actions for devices.
Mark the devices for which actions
are to be performed a few minutes
after leaving.
Press on the icon to
customise the “leaving” mode.

14
Thanks to geolocation, your home welcomes you
when you return.
Specify in what distance from home the automa-
tic devices specied should turn on.
E.g. When leaving work I activate the “Returning”
mode. Geolocation is active and my home wel-
comes me in the way I specied.
Specify the distance from
which you want to activate
the “Returning” mode and turn
geolocation on or off.
Mark the devices for which
actions are to be performed
before returning.
Specify the time of return drive:
the mode activates after returning.
Mark the devices for which
actions are to be performed
after returning.
Returning
Press on the icon to customise the
“Returning” mode.

15
4.Installation management
You can press to access a number of functions that you use to make settings and manage your
Connexoon Access RTS application:
• the dashboard,
• your messaging service,
• parameters,
• your account,
• the help system,
• disconnection from the application.
The “Conguration” menu is used to access the advanced installation functions. (see section 5).

16
Dashboard
Just press on this menu to open a history of all your connected devices.
• A green dot in front of a command indicates that the action was completed correctly.
• A red dot indicates that the action was interrupted deliberately.
• An orange triangle indicates that a problem occurred.
Press the icon for more information.

17
Messages
The Connexoon messages include all the information regarding updates and future novelties.
Connexoon Window update
Dear Connexoon user,
Please download the new update of your
Connexoon application.
WEDNESDAY 28 JANUARY 2015
MESSAGES
Access

18
Parameters
Possibility of home geoloca-
tion in order to receive local
meteorological information.
Activation/deactivation of
meteorological information
on the welcome page
Activation/deactiva-
tion of alarms sent via
e-mail.
In this menu it is possible to turn on displaying weather data, turn or alarms sent via e-mail,
and/or turn on “push” notications. Here it is also possible to display widgets for a mobile phone
an/or Apple watch and to specify one’s identier in order to adjust history to one’s own needs.

19
My account
This page includes information provided during activation of Connexoon.

20
Help
This page may be lled in by you or the tter in order to enable direct contact with the tter
in case of any questions.
Stay in touch with the tter by entering their contact data in the application. You can contact
the tter later with a single button tap.
A single button tap is also all you need to obtain the telephone number of Somfy customer
service department.