Polaroid pixie CSA-00301S User manual

FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subjected to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in residential installations.
This equipment generates, uses, and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television
equipment reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Move the equipment away from the receiver.
-Plug the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/television technician for additional
suggestions.
You are cautioned that any change or modications to the equipment not expressly
approved by the party responsible for compliance could void Your authority to
operate such equipment.
* Environment:
Do not throw the appliance away with the normal household waste at the end of its
life. Bring it to an ofcial collection point for recycling.
By doing this you will help to preserve the environment.

1
Welcome:
Thanks for purchasing this product. Much time and effort has gone
into this product’s development, and our hope is it will give you many
years of trouble-free service.
Safety Notice:
1. Do not disassemble the camera; otherwise the warranty will be
voided.
2. Avoid all contact with water, and dry hands before using.
3. Do not expose the camera to high temperature or leave it in direct
sunlight. Doing so may damage the camera.
4. Use the camera with care. Avoid pressing hard on the camera
body.
5. For your own safety, avoid using the camera when there is a storm
or lightning.
6. Do not use batteries of different types. Doing so may lead to the
potential for serious damage.
7. Remove the batteries during long periods of non-use, as a
deteriorated battery may affect the functionality of the camera.
8. Remove the battery if it shows signs of leaking or distortion.
9. Use only the accessories supplied by the manufacturer.
10. Keep the camera out of the reach of small children.

2
Parts of the video camera - 1
1Microphone
2Power Button ( )
3LCD Panel
4Record Button ( )
5Up Button (Zoom in)
6Down Button (Zoom out)
7OK Button
8Mode/ Button
9USB Port
10 TV-out Connector
1
2
3
4
5
6
7
8
9
10
Need help with your digital video camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
11 Shutter Button ( )
12 Strap Holder
13 Speaker
14 Battery / Memory Card Slot
15 Lens
16 Flash Strobe
17 Tripod Port
Parts of the video camera - 2

3
Parts of the video camera - 1
1Microphone
2Power Button ( )
3LCD Panel
4Record Button ( )
5Up Button (Zoom in)
6Down Button (Zoom out)
7OK Button
8Mode/ Button
9USB Port
10 TV-out Connector
Need help with your digital video camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
11 Shutter Button ( )
12 Strap Holder
13 Speaker
14 Battery / Memory Card Slot
15 Lens
16 Flash Strobe
17 Tripod Port
Parts of the video camera - 2
11
12
13 15
16
17
14

4
1. Loosen the screws and remove
the battery/card compartment
cover.
2. Insert the card as indicated in the
illustration until it reaches the end
of the slot.
3. When using a SD card, the built-in
memory will become inaccessible.
4. To remove the SD card, gently
push the card until it pops up.
5. Re-install the cover.
Please use two AA batteries.
1. Loosen the screws and
remove the battery/card
compartment cover as
indicated.
2. Load the batteries into the
battery compartment with +
and - ends correctly installed.
3. Re-install the cover.
Loading the battery
Inserting the SD/MMC card (optional)
Turning on the video camera:
Open the LCD panel; or press and
hold down the Power button ( ) for
3 seconds.
Turning off the video camera:
Close the LCD panel; or press and
hold down the Power button ( ) for
3 seconds.
Turning on/off the video camera
Icon Description
Full battery life
Moderate battery life
Low battery life
Empty battery life
Battery life indicator
1
2
2
1

5
1. Loosen the screw and remove
the battery/card compartment
cover.
2. Insert the card as indicated in the
illustration until it reaches the end
of the slot.
3. When using a SD card, the built-in
memory will become inaccessible.
4. To remove the SD card, gently
push the card until it pops up.
5. Re-install the cover.
Please use two AA batteries.
1. Loosen the screw and remove
the battery/card compartment
cover as indicated.
2. Load the batteries into the
battery compartment with +
and - ends correctly installed.
3. Re-install the cover.
Loading the battery
Inserting the SD/MMC card (optional)
Turning on the video camera:
Open the LCD panel; or press and
hold down the Power button ( ) for
3 seconds.
Turning off the video camera:
Close the LCD panel; or press and
hold down the Power button ( ) for
3 seconds.
Turning on/off the video camera
Icon Description
Full battery life
Moderate battery life
Low battery life
Empty battery life
Battery life indicator
1
2
2

6
Reading LCD indicators - 1
Digital video camera mode:
Video REC mode:
1.1
Zoom ratio
SD card inserted
Battery life
Flash mode
Number of
recordings
Mode icon
1.1
Zoom ratio
SD card inserted
Battery life
Recording icon
Mode icon Recording time
Playback thumbnail mode:
Playback full mode:
Reading LCD indicators - 2
File type
Highlight box
Current/total
recordings
Mode icon
Playback
Button tip Battery life
Play Exit
Button tip
Mode icon
Battery life

7
Reading LCD indicators - 1
Digital video camera mode:
Video REC mode:
1.1
Zoom ratio
SD card inserted
Battery life
Flash mode
Number of
recordings
Mode icon
1.1
Zoom ratio
SD card inserted
Battery life
Recording icon
Mode icon Recording time
Playback thumbnail mode:
Playback full mode:
Reading LCD indicators - 2
File type
Highlight box
Current/total
recordings
Mode icon
Playback
Button tip Battery life
Play Exit
Button tip
Mode icon
Battery life

8
Need help with your digital video camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
Connecting the video camera to a TV
NOTE : TV systems differ for different countries. You may need
to adjust the TV-out setting to display normally. (Taiwan: NTSC;
America: NTSC; Europe: PAL; China: PAL)
Connect your video camera and TV via the accessoryAV cable for
real-time display. You can display your video clips and still pictures
directly on your TV, sharing them with your friends and family.
1. Turn on your TV and switch to an appropriateAV input mode.
2. Connect the audio and video ends of the AV cable to the TV.
3. Turn on the video camera.
4. Connect the other end of the AV cable to your video camera.
1. Turn on the video camera.
2. Connect the video camera to your computer via the USB cable, and
the video camera will become a removable disk in your computer.
3. You can copy les from the video camera to your computer, and
vice versa.
Connecting the video camera to your PC
Recording a video clip
1. Press the Record button ( ) to start recording.
2. Use the Zoom buttons ( ) to zoom in or zoom out the screen.
3. Press the Record button ( ) again to stop recording.
Taking a still picture
Playing back your recordings
1. Use the Zoom buttons ( ) to zoom in or zoom out the screen.
2. Press the Shutter button ( ) on the top of the camera to take a
still picture.
1. Press the Mode button.
2. Use the Zoom buttons ( ) to select Playback mode.
3. Press the OK button to enter.
4. Use the Zoom buttons ( ) to shift between les.
5. Press the OK button to review/play the le.
To delete a picture
1. You must be in the Playback mode.
2. To delete a le, press the Shutter button ( ) and a prompt
window will show up. Select ( ) to conrm the deletion or select
( ) to cancel.

9
Recording a video clip
1. Press the Record button ( ) to start recording.
2. Use the Zoom buttons ( ) to zoom in or zoom out the screen.
3. Press the Record button ( ) again to stop recording.
Taking a still picture
Playing back your recordings
1. Use the Zoom buttons ( ) to zoom in or zoom out the screen.
2. Press the Shutter button ( ) on the top of the camera to take a
still picture.
1. Press the Mode button.
2. Use the Zoom buttons ( ) to select Playback mode.
3. Press the OK button to enter.
4. Use the Zoom buttons ( ) to shift between les.
5. Press the OK button to review/play the le.
: To delete a le, press the Shutter button ( ) and a prompt window will
show up. Select ( ) to conrm the deletion or select ( ) to cancel.
Need help with your digital video camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
Connecting the video camera to a TV
NOTE : TV systems differ for different countries. You may need
to adjust the TV-out setting to display normally. (Taiwan: NTSC;
America: NTSC; Europe: PAL; China: PAL)
Connect your video camera and TV via the accessoryAV cable for
real-time display. You can display your video clips and still pictures
directly on your TV, sharing them with your friends and family.
1. Turn on your TV and switch to an appropriateAV input mode.
2. Connect the audio and video ends of the AV cable to the TV.
3. Turn on the video camera.
4. Connect the other end of the AV cable to your video camera.
AudioVideo
AV Mode TV-Out
1. Turn on the video camera.
2. Connect the video camera to your computer via the USB cable, and
the video camera will become a removable disk in your computer.
3. You can copy les from the video camera to your computer, and
vice versa.
Connecting the video camera to your PC

10
Using menu
The menu items in Setting mode provide several options to ne-tune
your video camera functions.
To enter a mode:
1. Turn on the video camera.
2. Press the Mode button.
3. Use the Zoom buttons ( ) to select the desired item.
4. Press the OK button to enter.
Basic operations in the menu:
How to... Action
Move the highlight bar Use the Zoom buttons ( ) to move up
or down.
Conrm an item Press the OK button.
Exit menu / Go back to
upper menu Press the Mode/ button.
Menu items in Setting mode
Power-on → Press the Mode button → Enter Setting mode → Press
the OK button.
Item Option Description
Flash Flash automatically res when needed.
Flash is disabled.
Selftimer
Selftimer is on. The video camera will have a
ten second delay before recording when the
Shutter button is pressed.
Selftimer is off.
Flicker Set icker frequency to 50Hz or 60Hz. For more information, please refer to the “Flicker
Settings” table below.
TV-out
This option is suitable for America, Taiwan,
Japan, and Korea areas.
This option is suitable for Germany, Eng-
land, Italy, Netherlands, China, Japan, and
Hong Kong.
Flicker Settings Table:
Area England Germany France Italy Spain Russia
Setting 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz
Area Portugal America Taiwan China Japan Korea
Setting 50Hz 60Hz 60Hz 50Hz 50/60Hz 60Hz

11
Using menu
The menu items in Setting mode provide several options to ne-tune
your video camera functions.
To enter a mode:
1. Turn on the video camera.
2. Press the Mode button.
3. Use the Zoom buttons ( ) to select the desired item.
4. Press the OK button to enter.
Basic operations in the menu:
How to... Action
Move the highlight bar Use the Zoom buttons ( ) to move up
or down.
Conrm an item Press the OK button.
Exit menu / Go back to
upper menu Press the Mode/ button.
Menu items in Setting mode
Power-on → Press the Mode button → Enter Setting mode → Press
the OK button.
Item Option Description
Flash Flash automatically res when needed.
Flash is disabled.
Selftimer
Selftimer is on. The video camera will have a
ten second delay before recording when the
Shutter button is pressed.
Selftimer is off.
Flicker Set icker frequency to 50Hz or 60Hz. For more information, please refer to the “Flicker
Settings” table below.
TV-out
This option is suitable for America, Taiwan,
Japan, and Korea areas.
This option is suitable for Germany, Eng-
land, Italy, Netherlands, China, Japan, and
Hong Kong.
Flicker Settings Table:
Area England Germany France Italy Spain Russia
Setting 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz
Area Portugal America Taiwan China Japan Korea
Setting 50Hz 60Hz 60Hz 50Hz 50/60Hz 60Hz

12
Appendix : Storage capacity
Memory Video (min.) Still picture
SD/MMC card (256MB) 3 750
SD/MMC card (512MB) 6 1500
SD/MMC card (1GB) 12 3000
SD/MMC card (2GB) 24 6000
Note: The actual value of capacity may vary (up to ± 30%) depending on the
color saturation and complexity of your subject and surroundings.
“Polaroid”, “Polaroid and Pixel”, and “Polaroid Pixie” are trademarks of
Polaroid Corporation.
Need help with your digital video camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.

1
Bienvenu:
Cher utilisateur, merci d’avoir acheté ce produit.
De gros efforts et beaucoup de temps ont été nécessaires à son
développement et nous espérons qu’il puisse vous offrir le service que
vous attendez pendant de nombreuses années.
Note de sécurité:
1. Ne pas laisser tomber, ne pas percer ou désassembler le
caméscope ; dans le cas contraire, la garantie sera annulée.
2. Éviter tout contact avec l’eau et se sécher les mains avant
utilisation.
3. Ne pas exposer le caméscope à des températures élevées
ni le laisser en plein soleil. Vous risqueriez d’endommager le
caméscope.
4. Utiliser le caméscope avec soin. Éviter d’appuyer fortement sur le
corps de l’appareil.
5. Pour votre sécurité, évitez d’utiliser le caméscope pendant un
orage ou quand il y a du tonnerre.
6. Ne pas utiliser de batteries de types différents. Cela pourrait
causer des dommages importants.
7. Enlever la batterie pendant les longues périodes sans utilisation,
une batterie détériorée pouvant affecter les fonctions du
caméscope.
8. Enlever la batterie si elle montre des signes de fuite ou de
distorsion.
9. N’utiliser que les accessoires fournis par le fabricant.
10. Garder le caméscope hors de portée des enfants.

2
Parties du caméscope - 1
1Microphone
2Bouton d’alimentation ( )
3Ecran LCD
4Bouton Enregistrer ( )
5Bouton Haut (Zoom avant)
6Bouton Bas (Zoom arrière)
7Bouton OK
8Bouton Mode/
9Port USB
10 Connecteur de sortie TV
1
2
3
4
5
6
7
8
9
10
Besoin d’aide avec votre caméscope numérique ?
Appelez le numéro vert de notre service clientèle. Le numéro se trouve
sur l’insert avec cette icône :
Ou visitez www.polaroid.com.
11 Bouton Déclencheur ( )
12 Attache du bracelet
13 Haut-parleur
14 Compartiment piles/
carte mémoire
15 Objectif
16 Eclairage du ash
17 Support trépied
Parties du caméscope - 2

3
Parties du caméscope - 1
1Microphone
2Bouton d’alimentation ( )
3Ecran LCD
4Bouton Enregistrer ( )
5Bouton Haut (Zoom avant)
6Bouton Bas (Zoom arrière)
7Bouton OK
8Bouton Mode/
9Port USB
10 Connecteur de sortie TV
Besoin d’aide avec votre caméscope numérique ?
Appelez le numéro vert de notre service clientèle. Le numéro se trouve
sur l’insert avec cette icône :
Ou visitez www.polaroid.com.
11 Bouton Déclencheur ( )
12 Attache du bracelet
13 Haut-parleur
14 Compartiment piles/
carte mémoire
15 Objectif
16 Eclairage du ash
17 Support trépied
Parties du caméscope - 2
11
12
13 15
16
17
14

4
1. Dévissez les vis et ouvrez le
couvercle du compartiment
piles/carte.
2. Insérez une carte mémoire dans
le sens indiqué jusqu’au fond de
la fente.
3. Lorsque vous utilisez une carte
SD, la mémoire interne deviendra
inaccessible.
4. Pour enlever la carte mémoire
SD, appuyez doucement sur la
carte pour l’éjecter.
5. Fermez le couvercle lorsque voua
avez ni.
Veuillez utiliser deux piles AA.
1. Dévissez les vis et ouvrez le
couvercle du compartiment
piles/carte mémoire comme
indiqué.
2. Installez les piles dans le
compartiment des piles en
faisant attention avec le sens
des bornes + et -.
3. Fermez le couvercle.
Installation des piles
Insertion d’une carte SD/MMC (en option)
Allumer le caméscope :
Ouvrez l’écran LCD ou appuyez sur le
bouton d’alimentation ( ) pendant 3
secondes.
Eteindre le caméscope :
Fermez l’écran LCD ou appuyez sur le
bouton d’alimentation ( ) pendant 3
secondes.
Allumer/éteindre le caméscope
Icône Description
Batterie complètement chargée
Batterie moitié pleine
Batterie faible
Batterie vide
Indicateur de niveau des piles
1
2
2
1

5
1. Desserrer la vis et enlever la
couverture de compartiment
batterie et carte comme indiqué.
2. Insérez une carte mémoire dans
le sens indiqué jusqu’au fond de
la fente.
3. Lorsque vous utilisez une carte
SD, la mémoire interne deviendra
inaccessible.
4. Pour enlever la carte mémoire
SD, appuyez doucement sur la
carte pour l’éjecter.
5. Fermez le couvercle lorsque voua
avez ni.
Veuillez utiliser deux piles AA.
1. Desserrer la vis et enlever la
couverture de compartiment
batterie et carte comme
indiqué.
2. Installez les piles dans le
compartiment des piles en
faisant attention avec le sens
des bornes + et -.
3. Fermez le couvercle.
Installation des piles
Insertion d’une carte SD/MMC (en option)
Allumer le caméscope :
Ouvrez l’écran LCD ou appuyez sur le
bouton d’alimentation ( ) pendant 3
secondes.
Eteindre le caméscope :
Fermez l’écran LCD ou appuyez sur le
bouton d’alimentation ( ) pendant 3
secondes.
Allumer/éteindre le caméscope
Icône Description
Batterie complètement chargée
Batterie moitié pleine
Batterie faible
Batterie vide
Indicateur de niveau des piles
1
2
2

6
Description des symboles de l’écran LCD-1
Mode Caméscope numérique :
Mode ENR vidéo :
1.1
Niveau de zoom
Carte SD insérée
Durée des piles
Mode de ash
Nombre
d’enregistrements
Icône de mode
1.1
Niveau de zoom
Carte SD insérée
Durée des piles
Icône
d’enregistrement
Icône de mode Durée
d’enregistrement
Mode Lecture diapo :
Mode Lecture pleine :
Description des symboles de l’écran LCD-2
Play Exit
Bouton conseil
Icône de mode
Durée des piles
Type de chier
Boîte de
sélection
Enregistrement
actuel / total
Icône de mode
Playback
Bouton conseil Durée des piles