Polaroid IDF-1030 User manual

Caution:
1.Only use a 3V CR2025 battery.
2.Dispose of used batteries according to local ordinance regulations.
3.Remove the battery when not using the Flash Player for prolonged periods.
Polaroid 10.4” Digital Picture Frame IDF-1030
Operation Manual
Installing a flash media card
1. Find the slot that fits your flash media card.
2. Insert the card in the correct slot.
3. To remove the card, simply push it in slightly
until it springs back out. Remove.
Design and specifications are subject to change without notice.
Replacing the Remote Control Battery
1. Remove the battery compartment by pulling the cover in the direction of the arrow.
2. Remove old battery and dispose of correctly.
3. Insert new battery taking note of correct polarity (+/-).
4. Replace cover.
20060816
SM/XD Card
CF/MD CardMS/SD/MMC Card
AV P o w e r
Power
Buttons on the Digital Picture Frame
Press & Hold Function:
When you press and hold a button for 3
seconds or more it activates an additional
function.
Play/pause (when viewing photos)
Press
Play/pause
Press & Hold
Enters “Menu” from any mode.
Rotate (when viewing photos)
Press
Rotates the picture
Press & Hold
Slideshow with music background
Up arrow
Press (when viewing photos)
Show previous picture
Press (under music slideshow mode)
Increase music volume
Press (under Menu operation)
Move up or go to previous
Press & Hold
Adjusts slide show interval time
Down arrow
Press (when viewing photos)
Shows next picture
Press (under music slideshow mode)
Decreases music volume
Press (under Menu operation)
Move down or go to next
Press & Hold (when viewing photos)
Transition mode selection
Power
Turns power on/off
POWER

1
Buttons on the Remote control
Setting up the Digital Picture Frame
1. Plug the appropriate end of the AC adapter into a power outlet and the other end into the Digital Picture Frame.
2. After you’ve stored content on a flash media card (not included), insert the card into the proper slot.
3. Turn the power switch to “ON”. As a default the first file of the card will be displayed first. Play sequences are automatically sorted alphabetically by
file name, regardless of file type.
Setting up the Digital Picture Frame
1. Press the “MUSIC” key to enter the music database. Use the arrow keys to select a music file.
2. Press the SLIDESHOW key.
3. After you’ve stored content on a flash media card (not included), insert the card into the proper slot.
4. Turn the power switch to “ON”. As a default the first file of the card will be displayed first. Play sequences are automatically sorted alphabetically by
file name, regardless of file type.
"Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, Waltham, MA, USA.
For service, support and warranty information, visit www.polaroid.com.
POWER button Press to turn player on or off.
SETUP button Press to open menu for changing settings.
CARD SELECTION button Press to choose a different memory card.
MUSIC button Press to go to and display music files.
PHOTO button Press to go to and display photo files.
ROTATE button Press to rotate photos 90 degrees clockwise on screen
ZOOM button Press to zoom up to 4x (on photos only)
SLIDESHOW button Press to start/stop a photo slideshow
+ VOLUME button Press to increase volume
- VOLUME button Press to decrease volume
MUTE button Press to instantly mute volume
↑button Press to move up when selecting files on your screen.
←button Press to move left when selecting files on your screen.
►║ PLAY/PAUSE button Press to play/pause or confirm selections on your screen.
→button Press to move right when selecting files on your screen.
↓button Press to move down when selecting files on your screen.
STOP button Press to stop the selected file/action.