Polaroid PLSTN36BK User manual

PLSTN36BK, PLSTN36BL
Wireless Headphones
User Guide
Buttons on the Headphones
Have you got everything?
Operation
1. Micro SD Card Slot
2. + Button
3. - Button
Power on and pair with a Bluetooth device
Press and hold the button on the headphone. The LED status indicator will red/blue,
indicating it is ready to pair with a Bluetooth device. Turn your smart phones Bluetooth
and select “PLSTN36XX” on the list of available devices. Once successfully, you will hear a
notication sound and the LED status indicator will light up blue. Music from your smart phone
will now be played through the headphones.
• Press the - button to play the previous song. Press and hold the - button to decrease the
volume level.
• Press the + button to play the next song. Press and hold the + button to increase the
volume level.
Bluetooth call function
Once successfully connected to your smart phone, you can answer/reject incoming phone
calls. Press the button to answer in an incoming call. Press and hold the button to reject
the call. Press the button twice to redial the most recent phone number.
• Press and hold the - button to decrease the volume level.
• Press and hold the + button to increase the volume level.
Radio function
Press the M button repeatedly until the headphone is on Radio mode. Press the button to
start auto searching for FM stations, the LED status indicator will ash. Ater auto search, the
headphone will store the FM stations.
• Press the - button to play the previously saved FM station. Press and hold the - button to
decrease the volume level.
• Press the + button to play the previously saved FM station. Press and hold the + button to
increase the volume level.
AUX mode
Connect a 3.5mm audio cable to the Aux In port of the headphone and the other end to your
audio device. The headphone will automatically switch to AUX mode and power o.
Micro SD mode
Insert a Micro SD card to the Micro SD port of the headphone. The Headphone will
automatically switch to Micro SD mode and you can use the - and + buttons to decrease/
increase volume.
Power o and charging
When the battery is low, a voice prompt “ low battery, please charge” will be heard. Connect
the supplied micro USB charging cable to the micro USB port and the other end of a USB
power source. The LED status indicator will light up red during charging and disappear when
fully charged.
Press and hold the button to power o the headphone. If not paired with a Bluetooth device,
it will automatically power o ater 5 minutes.
A. Wireless Headphones
B. Micro USB Charging Cable
C. User Guide
D. Warranty Certicate
D
M
1 2 3 4 5 6 7 8 9
4. LED Status Indicator
5. AUX In Port
6. Built-in Microphone
7. Micro USB Port
8. MODE Button
9. Button

Specications
General Safety Warnings
For the safety of yourself and others, follow all instructions and take notice of all the warnings. When ad-
hered to, these safety precautions can reduce the risk of re, electric shock and injury.
This product complies with Australian Safety standard AS/NZS 62368.1 to ensure the safety of the product.
The RCM is a visible indication of a product’s compliance with all applicable ACMA
regulatory arrangements, including all technical and record-keeping requirements.
IMPORTANT
Risk of hearing damage: Never place the headphones
on ears BEFORE turning them on, as the sudden
volume may be too high and could cause hearing
damage.
Keep the headphones out of ears until you have
turned down the volume. Test this by playing the
music and holding the headphones near (but not IN)
your ear, as you turn the volume down.
Once the volume is turned down, you can place the
headphones onto ears and gradually increase the
volume to the desired level.
Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging
materials are out of their reach.
To prevent environmental factors (dampness, dust,
food, liquid etc.) harming the power bank, only use it
in a well-ventilated, clean and dry environment, away
from excessive heat or moisture.
Keep the product away from direct sunlight or heat
sources.
In case of damage, do not disassemble, repair or
modify the product yourself. Contact After Sales
Support for advice on repair or replacement, or refer
servicing to qualified personnel only.
Children should be supervised to ensure they do not
play with the product.
Do not put any object on top of the product.
Do not place or store appliance where it can fall or
be pulled into a bath or sink.
This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the product by a
person responsible for their safety.
Do not expose the product to microwaves.
Clean using a dry cloth only - do not use water or
chemicals.
Keep the product away from oils, chemicals or any
other organic liquids.
Use this appliance only for its intended purpose as
described in this guide.
Responsible disposal of the packaging
The packaging of your product has been selected
from environmentally friendly materials and can
usually be recycled. Please ensure these are disposed
of correctly. Plastic wrapping can be a suffocation
hazard for babies and young children, please ensure
all packaging materials are out of reach and are safely
disposed of. Please recycle these materials rather
than throwing them away.
Responsible disposal of the product
At the end of its working life, do not throw this product
out with your household rubbish. An environmentally
friendly method of disposal will ensure that valuable
raw materials can be recycled. Electrical and
electronic items contain materials and substances
which, if handled or disposed of incorrectly, could
potentially be hazardous to the environment and
human health.
Have questions?
We’ve got answers.
Visit us at tempo.org/support or
give us a call at 1300 886 649
Distributed by:
Tempo (Aust) Pty Ltd
PO Box 132,
Frenchs Forest,
NSW 1640
Polaroid, Polaroid Color Spectrum and Polaroid Classic
Border Logo are trademarks of PLR IP Holdings, LLC,
used under license . PLR IP Holdings, LLC does not
manufacture this product or provide any Manufacturer’s
Warranty or support.
©2021 All rights reserved.
Your new product is ready to enjoy!
Well done, you made it.
Now sit back and relax... your new product is automatically covered
by a 1-year warranty. How nice!
Ok, time to give us a call
What? You mean the User Guide didn’t have ALL the answers? Speak to us!
We’d love to help you get up and running as quickly as possible. Call our
Ater Sales Support on 1300 886 649.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Power Input 5VDC, 1A
Playback time 4 hours*
Charging time 3 hours
Battery 3.7V 200mAh
Dimensions (L) x (D) x (H) 170 x 88 x 185 mm
Weight 185g
* 4 hours of playback time is based on volume no higher than 80%
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of
such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their
respective owners.
Troubleshooting
Cannot hear
audio through
headphones
• Ensure the headphones are paired with your smart phone, the
LED indicator will light up blue.
• Increase the volume.
• Power o your headphones then power them on and pair with
your smart phone again.
Headphone not
charging • Ensure you are connected to a USB power source.
Cannot connect to
smartphone
• Ensure headphone is on before pairing.
• Ensure your Smart phones’ Bluetooth is turned on.
• Please power o headphone and start again.