Polhus Polar User manual

Polar hot tub Elegante
Hot tub with electric heating
Specications & instructions

Contents
1 General information
1.1 Symbols
1.2 Denitions
1.3 Warnings
2 Area of use
3 Transport and assembly
3.1 Transport
3.2 Assembly
4 Usage
5 Other hazards
6 Maintenance
7 Warranty
3
3
4
5
6
7
7
8
17
19
19
20

1. General information
This manual contains information about the area of use, handling,
transport, assembly, usage and maintenance. When using and
maintaining the product one should refer to this manual.
Weight without water: 240 kg
Total weight including water: 1890 kg
Capacity: 1650 l
The total weight does not include the weight of people bathing
in the tub. When mounting the tub, make sure that the ooring is
adapted for the total weight plus the weight of assumed users.
3
DANGER!
Immediate danger.
CAREFUL!
Potentially dangerous situation.
PLEASE NOTE!
Observe carefully.
1.1 Symbols

4
1.2 Denitions
• Product - Hottub with electric heater
• Handling – Transport, assembly or maintenance of the product
• Usage – Using the product after handling and assembling the
product in the correct manner.
• Assembly – Mounting the dierent parts
• Transport – Moving the product from one place to another.
Transport also includes lifting the product on the plot.
• Other risks – Risks that occur when using the product
• Maintenance – Actions related to cleaning, reparation or replacing
parts of the product
• Operator – The person who’s responsible for the transport,
handling, assembly or maintenance of the product.
• Warranty – The time post sale when Polhus is responsible for
the product’s technical condition. The warranty period is 36
months post purchase, except for the parts which have a 24
months warranty.
• Hot tub – The part of the hot tub which is lled with water
• Equipment – Filter, pump and heater (see image 1) which have
been mounted in the hot tub to heat up and clean the water in
the tub.

1.3 Warnings
The warranty only applies if you follow this manual and meet the
requirements of it. The product may only be handled and maintained
by operators who have read this manual and understood its contents.
Operators must be at least 18 years of age and wear protective gear.
If a hazardous situation arises during handling or use of the product,
all activities must cease immediately. If needed, call the emergency
services.
Mounting and maintenance may only be performed by operators who
are familiar with the tasks and can perform the work. If any changes
are made to the product’s construction Polhus must inspect and
conrm these changes.
When handling, assembling, maintaining or using the product and
its parts one must follow all the required state laws and regulations
(in addition to the contents of this manual) to ensure the users safety
and the validity of the warranty.
The warranty does not apply if the buyer has changed the construction
of the product or used non-original parts without Polhus approval.
If you have any questions regarding this manual please contact Polhus.
5

2. Area of use
This hot tub is suitable for outdoor use all year round. The water in
the tub can be heated with an electric heater. We have a seperate
manual for the electric heater. This is not covered in this manual.
Use of the product other than for its intended purpose is prohibited.
DANGER!
Using the product indoors is strictly prohibited.
Such use may result in serious injury or death.
PLEASE NOTE!
Using the product in the wrong way may damage
the product or cause damage to health.
CAREFUL!
Using non-original parts can cause damage to
the product and mortal danger.
6

3. Transport and assembly
3.1 Transport
The hot tub is transported on a pallet, standing on one side.
Before opening the package you should inspect it to make sure it
hasn’t been damaged during transport. If you discover any damage,
you should indicate this on the transport document (CMR).
Remove the cardboard and plastic packaging material from the
product before assembly. Remove any equipment that has been
packed inside the hot tub before turning it over.
The weight of the package is about 240 kg. It takes at least three
people to turn the hot tub into its correct position. If possible,
you should use lifting equipment. When the hot tub is in the
correct position, the pallet can be removed from the side.
7

3.2 Assembly
When you’ve opened the package you should check that all of the
parts shown in picture 1 are there. If anything is missing please
register this as a claim on our website.
The package includes the following parts:
1. Fiberglass hot tub
2. Thermowood panel and separate equipment cabinet
3. Filter system
4. Electric heater
5. Pumping system
6. Short hose (2 pcs)
7. Filter balls
8. Long hose (2 pcs)
6 7
1
2
3
4
5
8
Figure 1: Package contents
8

Parts for the hot tub:
1. Opening/entry for lter and heating system
2. Opening/exit for lter and heating system
3. LED lights
4. Opening to drain for water
Figure 2: Parts for the hot tub
9

Correct mounting sequence:
1. Remove the cardboard and plastic packaging from the dierent parts.
2. Prepare a at and hard surface and place the hot tub there
3. Remove the equipment cabinet door. Unscrew the round screws
in the lower corner of the cover (shown with an arrow in Figure 3)
and lift the cover o.
Figure 3. Removing the equipment cabinet door
10