pols potten Hiding lady lamp User manual

Hiding lady lamp
design by minke van voorthuizen
polspotten.nl
global-from-holland
instruction manual
230-450-067

“
Thank you for choosing a pols potten product.
To ensure safe and satisfactory use of this product,
please carefully read the below instructions beforehand.
“
Pols Potten B.V. can not be held responsible for improper use or installation of this product other than indicated in the instructions in
the instructions manual. version no.3
general information
care instructions
safety instructions
The shade and base of the lamp is made of white unglazed porcelain with CE certified
electrical parts.
Light bulb E14, MAX40W. Recommended light source: 4W LED.
This lamp is for indoor use only.
Connect to 220-240V AC only.
Always use the correct type of light bulb and wattage, never exceed the wattage
stated above.
When changing a light bulb, always unplug the lamp and allow the old light bulb to
cool down before handling. Carefully dispose of used light bulbs.
If the external cable of this luminaire is damaged, it shall be exclusively replaced by an
qualified person.
This lamp should not be adapted or modified in any way.
Please keep these instructions for future reference.
We recommend cleaning the interior and exterior of the lamp with a soft, dry brush.
Avoid contact with abrasive, alcohol and solvent based substances or cleaning
agents, they can damage the surface.
Do not strike with hard or sharp items.
done!
1
2