Polygroup LUMATIONS COLOR BLAST User manual

OWNER′S MANUAL
1
DISTRIBUTED BY: Polygroup®Trading Limited
Unit 606, 6/F, Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong
CAUTION:
1. To reduce the risk of fire or electric shock:
• Do not install on trees having needles, leaves or branches covering of metal or materials which look like metal;
• Do not mount or support cords or cables in a manner that can cut or damage wire insulation;
• Do not attempt to replace lamps or modify string;
• Use only the adapter provided with this product;
• This product does not contain lamp shunts, which allow the product to operate if one lamp burns out.
LUMATIONS®
COLOR BLAST
™
REMOTE CONTROLLED LED LIGHTS
SNOWFLAKE PATHWAY MARKER LED LIGHTS
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When used outdoors, this product must be connected
to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
2. This seasonal use product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters, fireplace, candles or other similar source of heat.
4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
5. Do not let lamps rest on the supply cord or on any wire.
6. Disconnect the product from power source when leaving the house, when retiring for the night, or if left unattended.
7. This is an electric product - not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played or placed where small
children can reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord, wire, or light string.
10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
11. Do not cover the product with cloth, paper or any materials not part of the product when in use.
12. This product can be used by children ages 8 years and above, and people with reduced physical, sensory or mental capabilities, if they have
been given the right supervision or instructions concerning the use of the product in a safe way and understand the hazards involved. Children
should not play with the product. Cleaning and user maintenance should not be made by children without supervision.
13. Risk of fire: the supply cord, adapter, plugs and/or connectors cannot be replaced or modified. If either is damaged, the product should be scrapped.
14. Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.
15. Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS.
WARNING
READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
FAILURE TO FOLLOW THESE WARNINGS AND INSTRUCTIONS CAN RESULT IN SERIOUS INJURY OR DEATH TO USERS, ESPECIALLY CHILDREN.
WARRANTY
Thank you for your purchase of Polygroup®products! We do hope that you are happy with what you received, but we know sometimes it’s necessary
to exchange or return an item. Therefore, Polygroup®offers a 30-day limited warranty on this product.
We are happy to repair your defective item or replace it with an item that is equal to the purchase price of the item, given that:
●You are the original purchaser for products purchased directly from an authorized retailer or wholesaler of Polygroup®products;
●The item was purchased within the last 30 days;
●The item was purchased during its intended season;
●Proof of purchase can be provided, and
●The item is in its original packaging.
If you meet these requirements, please contact us at (email) [email protected] or (phone) 1-888-919-0070 so that we may forward you a
quality assurance form.
* Note: Warranty is not extended to items that are purchased from seasonal stores as they generally sell items with an "all sales final" policy.
Warranty is also not extended to close-out, second quality, or resold products (i.e. garage sales, online auctions, or online retailers not purchased
directly from Polygroup®). Any issues with items purchased from these types of vendors/sellers will need to be addressed through them.

2
1. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off
easily. Keep the tree holder filled with water. This item may be omitted if the product is not intended for placement on a tree or next to a tree.
2. If the product is placed on a tree, the tree should be well secured and stable. This item may be omitted if the product is not intended for placement on a tree or
next to a tree.
3. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on
the product conductors, connections, and wires.
5. When not in use, store neatly in a cool, dry location protected from sunlight.
USE & CARE INSTRUCTIONS
EXTENDER KIT SETUP INSTRUCTIONS
Mix-and-Match within the same series for Extra Fun!
This product is connectable with other Color Blast™Type B LED Lights. Simply calculate the Rated Wattage of all connected products and create your
own light show.
IMPORTANT: The total Rated Wattage of all connected products should not exceed the Maximum Wattage Capacity of a single product.
SETUP INSTRUCTIONS
1. Understand your product.
2. Push the stakes into the ground (soil/lawn) at your desired spot and plug it in to the wall outlet.
Example:
(1) Max. Watt Capacity of Product A: 10W
(2) Rated Wattage of Product A: 2.9W
(3) Rated Wattage of Product B: 4W
Then a feasible connection can be:
A x 1 + B x 1
(2.9W) + (4W) = 6.9W
6.9W < 10W
Ground Stake x 3
2. Make sure connectors are fully inserted and any connector rings are twisted until completely secured such that the rings can no longer be turned
and the two portions of the connectors are completely assembled.
3. The lighting string is rated 4 Watts (0.8 Amps). Do not overload. Connect other COLOR BLAST™ remote controlled LED lights (Type B) end-to-end
up to a maximum of 10 Watts (2.0 Amps) total. To avoid the risk of fire or personal injury, do not exceed the maximum allowable electrical load.
Snowflake Pathway Marker LED Lights
Rated Wattage: 4W (0.8A), Total Wattage: 5.4 Watts
Maximum Wattage Capacity: 10W (2.0A)
AC Adapter
Input: 120V/60Hz, 0.16A
Output: DC 5V, 2A
Adapter
Extension cord
Controller Add-on Connector

OWNER′S MANUAL
3
EXTENDER KIT SETUP INSTRUCTIONS
2. Unlock the lock nut, and pull apart the plugs to reveal the male connector.
3. Save the power adapter for future use.
5. Locate the add-on connector of the second kit.
Open the protective cap to reveal the female connector.
7. Push the ground stake into the ground (soil/lawn) at your
desired spot.
4. Take the second kit out from the box, and insert ground stakes into
LED lights.
6. Connect the two kits together. Tighten the lock nut to secure the
connection.
1. Locate the extension cord and ground stakes of the first kit.
8. Plug it in to the wall outlet.
Ground Stake x 3
* You can use or remove the extension cord as you need
9. For best signal quality/reception, make sure the controller
is placed on a raised area free of obstacles.
TIP: Simply use the remote control to enjoy the
color spectacle. Please see REMOTE CONTROL
INSTRUCTIONS.

4
1. Slide open the battery cover.
2. Replace with a new CR2032 button cell
battery with correct polarities (+/-) as indicated.
3. Slide the battery cover closed.
Battery Replacement
Remove insulation
tab before use.
Battery Cover
WARNING: This product may potentially trigger seizures for people
with photosensitive epilepsy when using the motion effect light modes.
WARNING
1. This product is powered by a lithium battery. Due to their small size,
lithium batteries can easily be swallowed by children. Ingestion of
such batteries has been known to cause death.
2. SMALL PARTS, KEEP AWAY FROM CHILDREN.
3. Do not expose the product to moisture.
4. Remove batteries when not used for an extended period of time,
or when depleted.
5. Dispose of used batteries properly.
6. Use only CR2032 batteries for the remote controller.
7. Clean the battery contact surfaces gently prior to battery installation.
8. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY
EXPLODE OR LEAK.
REMOTE CONTROL INSTRUCTIONS
Multi Color Steady Glow
Color Wheel
Faster Light Effect For
Preset Motion
Slower Light Effect For
Preset Motion
Previous Preset Motion Effect
Tap or to select from the
8 preset motion effects:
• Strobe
• Chasing
• Fading
• Rainbow Chasing
• Stacking
• Twinkle
• Rotating
• Dimple
Customizable color selection
ON/OFF
Cool White Steady Glow
Brightness Up
Next Preset Motion Effect
Brightness Down
Tap to display all lights in
multi color steady glow
Tap to display all lights in
cool white steady glow