Polywood ADD200 User manual

__(1) Hardware pack
Qty. Description
Model: ADD200
__(1) Chair frame
__(1) Back assembly
top of the back leg using
HARDWAREISCOATEDSTAINLESSSTEELUNLESSOTHERWISESPECIFIED
(2) .27x2-1/2" Screws
Step 1
into position as shown
slipping bottom in first, then rotate back
Place back assembly in chair frame by
using (2) .27x3" Screws
Attach arms to back assembly
TOOLS NEEDED
Step 3
Step 2
Attach back assembly to seat using
(2) .27x2-1/2" Screws
Atach back assembly to the
4MM HEX KEY, ALLEN, SHORT ARM
(INCLUDED)
9/19/2014
ASSEMBLY INSTRUCTIONS
A
A
A
A
B
B
4MM HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
A - .273 X 2.50 SOCKET WAFER A
4
B - .273 X 3 SOCKET WAFER A
2

12/13/2012
ASSEMBLY INSTRUCTIONS
__(1) Hardware pack
(4) 3 1/4" Chair bolts.
Models: RT248, RCT248,
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
Qty. Description
(8) 2 1/2" screws.
TOOLS NEEDED
RRT248, RBT248
Step 2
Lay the table top on a flat surface.
4mm HEX KEY: INCLUDED
Attach braces to leg assemblies using
Step 1
(4) 3" screws.
Attach feet to legs using
Attach the leg assemblies to the table top using
Step 3
Set table upright and tighten all bolts
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
A
A - .27 X 2-1/2 SOCKET WAFER A
8
C
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
A
B
B
Removable table plug
included in table
FINE THREAD
4
C - 1/4-20 X 3-1/4 WAFER SHCS
4
B - .27 X 3 SOCKET WAFER A

To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at [phone] or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog