Polywood Club Sofa CLC71 User manual

C -1 1/2" chair bolt
4
D -3 1/4" chair bolt
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
2
4MM T-HANDLE HEX KEY
(INCLUDED)
B - capnut
20 A - 3" Chair screw
6
Left top rail
Left sideframe
right top rail using (4) 3” chair screws
Description
TOOLS NEEDED
*CLC71 shown
Model: CLC71 & CMC71
Step 2
Right, Center, Left
__(3) Seat cushion
__(3) Back cushion
__(1) Hardware pack
__(2) Sideframes
__(2) Front mid leg
__(2) Rear mid leg
are assembled.
-Repeat until all seats and backs
using (2) 3” chair screws
- Attach back assembly to seat assembly
Qty.
Lay a seat assembly on its side.
Attach left sideframe to seat assemby and
left top rail using (4) 3” chair screws
__(3) Seat assembly
__(3) Back assembly
__(3) Seat support
__(3) Top rails
Step 1
- Attach seat support to seat assembly
using (2) 3” chair screws
Step 3
Lay another seat assembly on its side.
Attach right sideframe to seat assemby and See page 2
-Phillips head screwdriver
9/14/2012
ASSEMBLY INSTRUCTIONS
Back assembly
Seat assembly
Seat support

Step 5
Attach all sections together using
B - (6) capnuts
C - (2) 1 1/2" chair bolts
D - (4) 3 1/4" chair bolts
C
D
D
D
D
C
B
B
B
B
B
B
Step 4
Fit all sections together with mid legs
front mid legs
Back mid legs
Right Center
Left
9/14/2012
ASSEMBLY INSTRUCTIONS
Model: CLC71 & CMC71
CMC71