Polywood ECA15 User manual

using (2) 2" screws
Qty. Description
Model: ECA15
using (2) 2" screws
Attach back to arm
using (2) 2" screws
Attach front legs to seat
using (6) 1-7/8" bolts, nuts
Step 2
__(1) Hardware pack
__(1) Short brace
__(1) Long brace
__(2) Arms
__(2) Front legs
__(1) Back using (2) 2" screws
Attach long brace
and washer (2) 2-1/4" bolts, nuts and washer
Attach arms to front leg using
__(1) Seat
Step 1
Step 3
Attach back to seat Step 4
Attach short brace to rear leg
ALLHARDWAREISSTAINLESSSTEEL 11/28/2012
ASSEMBLY INSTRUCTIONS
B
long brace
front
A
A
wing faces D,E
B
A
short brace
A
E-1/4-20 NYLOCK NUT
8
TOOLS NEEDED
7/16 Wrench
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
A
A
A
A
CD,E
D-1/4 FLAT WASHER
8
B-1/4-20 X 1-7/8 WAFER SHCS
6
C-1/4-20 X 2-1/4 WAFER SHCS
2
A-.27 X 2 SOCKET WAFER A
8

4mm HEX KEY: INCLUDED
Attach legs to table top with (6) 1½" chair bolts.
Qty.
Model: NST
Step 1
Description
6
TOOLS NEEDED
__(1) Hardware pack
__(1) Inside leg assembly
__(1) Outside leg assembly
__(1) Table top
ALL HARDWARE IS COATED STAINLESS STEEL 11/30/2012
ASSEMBLY INSTRUCTIONS
A
A
A - 1/4-20 X 1-1/2 WAFER SHCS