Polywood Rocking Poly Adirondack 2001-RC User manual

INSTRUCTION
MANUAL
Outdoor Rocking Poly Adirondack Chair
SKU: 2001-RC

TOOLS REQUIRED
UP TO 30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
NOTICE
ALLEN WRENCH
(PROVIDED)
WRENCH
(PROVIDED)
PARTS
1 PC
CHAIR SEAT
ABC
HARDWARE
M6 x 50mm
BOLT
M6 x 40mm
SCERW
M6 x 80mm
SCREW 2
8 PCS
3
2
6 PCS
1
2 PCS
Page 1 of 5
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and nuts before use.
• Reconfirm that all bolts, screws, and nuts are secure every 90 days.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges.
• Be very careful when folding chair to avoid smashing your hands or fingers.
Do not overtighten screws. (Insert all screws before tighten screws.)
4
6WRENCH
M6 WASHER
8 PCS
7
1 PC
4 PCS
M6 x40 mm
SCREW
ALLEN
WRENCH
8
1 PC
PHILLIPS
SCREWDRIVER
9
1 PC
CHAIR
330 LBS
CAPACITY
LBS
5
8 PCS
M6 NUT
1 PC
LEFT CHAIR ARM
CHAIR BACKREST
1 PC
(PROVIDED)
PHILLIPS SCREWDRIVER

1 PC
RIGHT CHAIR ARM
G
1 PC
2 PCS
FRONT RAIL
ROCKIING BASE H
Page 2 of 5
PARTS
DF E
Look at following overall view of this chair and learn the exact position of each parts to be assembled.
PRODUCT ASSEMBLY - OVERALL VIEW
1
I
I
I
F
I
A
I
D
I
C
I
H
B
I
GI
F
I
E
LEFT CHAIR LEG
1 PC
RIGHT CHAIR LEG
1 PC

Attach part C Left Chair Arm to part E Left Chair Leg with 1 PC of part 2 bolt and part 6 washer and
part 5 Nut. Do same to part F Right Chair Leg and part D Right Chair Arm.
Do not tighten screws too much at this stage.
PRODUCT ASSEMBLY
1
2Attach part F right Chair Leg and part E Left Chair Leg to part A Chair Seat with 4 PCS of
part 2 bolt and part 6 washer and part 5 Nut.
Page 3 of 5
2
2
E
C
6
6
5
5
2
E
A
D
C
65
C
F
D
F

Attach part F Backrest to part A Chair Seat and part D Right Chair Arm as well as part C Chair Left Arm
with 2 PCS of part 1 Screw and 2 PCS of part 3 Screw.
PRODUCT ASSEMBLY
3
4Turn the chair upside down and fix part G Rocking Base to part E Chair Left Leg and fix with 2 PCS of
part 4 Screw using a phillips screwdriver.
Attache the rocking base to part A Chair Seat with 1 PC of part 2 bolt and part 6 washer and part 5 nut.
Do the same to the other Rocking base.
Page 4 of 5
1
1
3
3
A
F
C
D
2
4
6
5
G
E
A

Attach part H Front rail with part G Rocking base to part G Rocking base and part E Left Chair Leg
with 2 PCS of part 3 screw.
Do the same to the right side to finish the assembly.
PRODUCT ASSEMBLY
5
Tighten all the screws and bolt connections to ensure a steady use of this chair.
Page 5 of 5
H
G
E
3
3