Polywood RT248 User manual

DESCRIPTIONQTY
MODEL: 1910
A
ALL HARDWARE IS STAINLESS STEEL
TOOLS NEEDED
A
Tighten all screws.
using (4) 1-3/4 bolts.
Attach back assembly to side frames
STEP 3
Do not tighten screws until last step.
using (4) 3" screws
Attach braces into pockets on side frames
STEP 1
for back legs.
(2) 4" screws for front legs and (2) 1-3/4 bolts
Attach seat assembly to side frames using
STEP 2
A
- (1) Front brace
- (1) Hardware pack
BB
B
B
C
C
- (2) Side frames RH/LH
- (1) Seat assembly
- (1) Back assembly
- (1) Medallion brace
A
12/3/2012
ASSEMBLY INSTRUCTIONS
A - 1/4-20 X 1-3/4 WAFER SHCS
6
4MM T-HANDLE HEX KEY
(INCLUDED)
Front
Rear
C - .27 X 4 SOCKET WAFER "A"
2
B - .27 X 3 SOCKET WAFER "A"
4

12/13/2012
ASSEMBLY INSTRUCTIONS
__(1) Hardware pack
(4) 3 1/4" Chair bolts.
Models: RT248, RCT248,
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
Qty. Description
(8) 2 1/2" screws.
TOOLS NEEDED
RRT248, RBT248
Step 2
Lay the table top on a flat surface.
4mm HEX KEY: INCLUDED
Attach braces to leg assemblies using
Step 1
(4) 3" screws.
Attach feet to legs using Attach the leg assemblies to the table top using
Step 3
Set table upright and tighten all bolts
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
A
A - .27 X 2-1/2 SOCKET WAFER A
8
C
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
A
B
B
Removable table plug
included in table
FINE THREAD
4C - 1/4-20 X 3-1/4 WAFER SHCS
4B - .27 X 3 SOCKET WAFER A