Pop-A-Shot BIG BALL User manual

Page 1 of 8
POP-A-SHOT®‘BIG BALL/ SMALL BALL’ STEEL
PREMIUM ELECTRONIC BASKETBALL GAME ASSEMBLY
INSTRUCTIONS
America’s Ultimate, Strongest and Only Indoor ‘Big Ball/ Small Ball’
Pop-A-Shot®– Scores both the Regulation and Small Basketballs.

Page 2 of 8
C
For proper assembly, be sure you tighten the following:
A. Leg bolts with extended legs.
B. Tighten T-Bar
C. Tighten nut on support bolt (included)
IMPORTANT FOR PROPER ASSEMBLY
WHEN ASSEMBLYING ANY POP-A-SHOT GAME INSERT ALL BOLTS, JUST
FINGER TIGHT UNTIL ALL BOLTS ARE IN PLACE THEN TIGHTEN
SECURELY.
A
B

Page 3 of 8
TOOLS REQUIRED:
• Allen Wrench (included)
• 9/16" Open End Wrench
• 7/16" Open End Wrench
• Pliers
Step 1:Thoroughly inspect all parts for quantity and defects. Once the unit is assembled, Pop-A-Shot, Inc.
is not responsible for damaged parts.
Step 2:Raise Front Upright. Insert Bolt into
Base.
Step 3:Raise Back Upright. Attach T-Bar to Back
Cross Bar and adjust T-Bar to support the Back
Upright. Tighten Bolts and Set Screw.
Step 4:Insert Horizontal Support Bars into the Back Uprights and the Front Uprights. Tighten Set Screws.

Page 4 of 8
Step 5: Attach
Rim with Collar
Assembly to the
backboard.
Attach Ramp use
zip ties to the 4
grommets to the
lower back of the
Backboard to
allow for
adjustments until
after side nets
are attached.
Insert lead wire
white female
Molex end onto
the male ends on
the back of the Electronic Scoreboard.
Step 6: Using Zip Ties through the grommets, attach the ramp to the back of the game where T-Bar bolts to
the frame. Leave slack in the ties to allow for adjustments until after side nets are attached.
Step 7: Using Zip Ties through the grommets, attach the ramp to the Front lower Cross Bar of the 2 Cross
Bars. Leave slack in the ties.
Top – Brown
Middle – Black
Bottom - Blue

Page 5 of 8
Step 8: Pull Vinyl flap over the top Cross Bar and then under the lower Cross Bar. Attach
flap to the Velcro underneath the ramp. Attach the sides of the ramp to the Top Support Bars and along the
Back Uprights and the Front Uprights of the game. Make sure All Velcro straps are in place.
Step 9: To make the ramp taut, adjust the ties on the
Back Upright first and then the ties on the Front
Uprights. Keep in mind that the ramp should have
square corners.
Step 10: The optional telescoping legs may be
released by removing the positioning bolts from the
frame. Lift the Front end first to let the legs drop far
enough to reinsert the positioning bolts into the
predrilled holes in the legs and the frame. Repeat this
step for the back of the game.
Step 11: Insert the male end of the Power Supply
into the Female end located on the back side of the
Electronic Scoreboard. Plug into power outlet.

Page 6 of 8
Step 12: Ball hammock on
bottom frame for ball storage.
Inflate the 6 balls - 3 big balls
and 3 small balls. Pump is
included.
Important Game Information: This game information is extremely important for Safety, installation, correct play and
Game care:
Read appropriate game and site recommendations for all Pop-A-Shot games.
Do not use the electronic games outdoors. Electronic games are intended for indoor use.
As with any electrical appliance, do not set game near a water source (for example: pool hot tub or bath tub).
Do not climb, crawl, or hang from the game structure. This could cause the game to tip over causing serious injury.
Do not attempt to service electrical components: tempering could result in electrical shock and injury.
All shots should be shot from directly next to and in front of the game. No shots should be taken in excess of 10 feet
from the front of the game rim; longer shots, slam dunks, or other trick shots could result in damage to game, property
or person.
It is recommended that the game be unplugged from its power source when not in use.
Do not over inflate the basketballs. Basketballs should be soft to the touch and easily indented with the fingers.
Especially this is true with the mini rubber basketballs.
Adult supervision (two adults) is required for installation.
Plug the power adapter into a 120 VAC household outlet to provide power for game.

Page 7 of 8
POP-A-SHOT, INC.
TERMS AND CONDITIONS
SALES OFFICE: Monday-Friday 8:00 am - 5:00 pm CST
PHONE: (866-929-6229) FAX (785-827-6336)
CREDIT:
Payment is due in advance of shipment. Pop-A-Shot accepts VISA, MasterCard, Discover and American Express.
Pop-A-Shot also accepts checks in advance of shipment. Quantity orders require 50% with firm purchase order
and 50% prior to delivery.
FREIGHT:
All products are shipped Federal Express or common carrier.
DAMAGE IN TRANSIT:
If merchandise is damaged in transit it is the customer’s responsibility to properly notate the damage on the freight
bill at the time of receipt in order to secure proper settlement from the carrier. Pop-A-Shot, Inc., is not responsible
for goods damaged in transit.
WARRANTY:
All electronic games carry a warranty for 90 days against defective workmanship and/or materials when used for
the purpose intended, under normal conditions. To obtain the warranty service the original purchaser must return
the product to designated customer service site.
RETURN POLICY:
Returns must follow prior authorization given by Pop-A-Shot, Inc. If an item must be returned, contact
Pop-A-Shot, Inc. to receive a return authorization number. This RA# must be clearly marked on ALL shipping
labels. All returns must be shipped prepaid. Collect shipments will not be accepted. Upon receipt of returned
goods, Pop-A-Shot, Inc. reserves the right to inspect and issue credit for items determined to be covered by
warranty. A 35% restocking charge may be assessed on all returned goods. Pop-A-Shot, Inc. reserves the right to
charge 50% restocking fees on any customized games. Pop-A-Shot, Inc. will not accept used games.

Page 8 of 8
MANUFACTURER’S 90 DAY LIMITED WARRANTY
This Pop-A-Shot product carries a warranty for 90 days against defective workmanship and/or materials when used for the
purpose intended, under normal conditions, and provided it receives proper care. This warranty extends only to the original
purchaser of the product. To obtain warranty service the original purchaser must return the product, together with proof of
purchase, to Pop-A-Shot, Inc. 200 N. 3rd Street, Salina, Kansas 67401. All warranty items will be returned to original
purchaser freight collect. All non-warranty items will be returned to original purchaser, Net C.O.D., freight collect. The
original purchaser must present the sales receipt or other document, which establishes proof of purchase and the date of
purchase. Pop-A-Shot, Inc. will inspect the returned product to determine whether repair, replacement or credit is in order.
THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY
COVERAGE. However, please detach and return the Owner Registration Card so that Pop-A-Shot, Inc. can contact you
should a question of safety arise which could affect you.
The warranty provided herein is in lieu of all other expresses warranties. Any implies warranties, including any implied
warranties of merchantability or fitness for a particular purpose, are limited in duration to the first 90 days from the date of
purchase. All other obligations or liabilities, including liability for consequential damages, are hereby excluded.
Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state.
POP-A-SHOT, INC.
Office (785) 827-6229 Fax (785) 827-6336
200 N. 3rd, PO Box 1073 Salina, Kansas 67402-1073
CLIP AND FORWARD TO ABOVE ADDRESS
OWNER REGISTRATION CARD
-----------------------------------------------------------------------------------------------------------------------------
Please Print
Name:________________________________________________________________________
Address: ______________________________________________________________________
City and State:__________________________________________________________________
Phone Contact Number(s): ________________________________________________________
Game Model:___________________________ Date of Purchase:_________________________
This manual suits for next models
1
Table of contents
Popular Game Console manuals by other brands

Fuhu, Inc.
Fuhu, Inc. nabi user manual

Sony
Sony PlayStation Portable PSP-1007 instruction manual

Microsoft
Microsoft Xbox 360 Setting up

Sony
Sony PlayStation 3 (Uncharted: Drake's Fortune Limited Edition... Safety and support

Analogue
Analogue nt mini user guide

Viper
Viper 42-1004 Easy assembly instructions & rules

Fisher-Price
Fisher-Price Splatster P6843 instruction sheet

Sony
Sony PSP Go 4-152-678-11 instruction manual

Nintendo
Nintendo Wii U Operation manual

Pandora
Pandora Games Mini instruction manual

Nintendo
Nintendo 1504166 - Game Boy Advance SP Edition... Programming manual

Excalibur
Excalibur NFL Game Time NF-06 user guide