Pop-A-Shot DUAL SHOT User manual

DUAL SHOT | SPORT
OWNERS MANUAL
SKU#PASDSS19-02 WWW.POP-A-SHOT.NET

Required
Phillips Head Screwdriver (Not included)
Flat Head Screwdriver (Not included)
Allen Wrench (Included)
Wrench (Included)
Tip: The included tools will certainly do the job,
but you probably have better tools of your own.
Recommended (but not required)
Electric Screwdriver
Tip: Make sure to set the tool to a very
low torque to prevent damage to the game.
Socket Wrench Set
Level
Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list page.
Find a clean, level place to begin assembling your Pop-A-Shot game.
Like most things in life, putting together your Pop-A-Shot is better when done with a friend.
Tip:
(we’ll tell you when).
If you can’t find someone to help for the entire time, at least try to get help at certain times
Tip: Before putting your game together, please visit our Support Page at www.pop-a-shot.net/support
There you’ll find more hints and hacks to help you put together your new game.
We hope you love your Pop-A-Shot and will let your friends and family (and any review sites)
know how you feel. If you do have a problem (and it happens), please let us know first and give us a chance to fix it.
Email: [email protected]
Read all instructions: All the safety and operating instructions should be read carefully before this
product is operated or played.
Caution: This is not a toy and is intended for use by or under the supervision of adults. Adults should
review safety guidelines with children to avoid possible risk of electric shock or other injuries.
Recommend:The game should be periodicallyexamined for conditions that may result in the risk of fire,
electrical shock or injury to persons. In the event such conditions exist, the game should not be used
until properly repaired.
Storage: This product is made from wood-based components and is sensitive toextreme temperatures
Page 2/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02

10
Extra Long
Bolt
Extension
Tube
Diagonal
Tube
Connector
Tube
Vertical Tube
Top
Elbow Tube
Base Tube
Back TubeFront Tube
Allen
Wrench
Bottom Tube
Back Board Scoreboard Metal Bolt Paddles Control Panel
Air Pump
BallsNut
Bolt
Short
Bolt
Medium
Bolt Washer
Rim Back Plate
Net
Plastic
Spacer
Ball Return
Ramp
Lean Bar
Wrench
x2 x2 x2
Forward
Tube x1
x2 x2 x2
123456
7 8 9 11
10 12
13 14 15 16 17
19 20 21 22 23 24
x2 x2 x2x2 x1 x1
x10 x4 x6 x16 x76x6
x40 x2 x1 x1 x4
x1
x1
x1
x1 x1 x2x4
25 26
31
x1
32
27 28 29 30
AC Adapter
DUAL SHOT SPORT-PARTS LIST
Page 3/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02

DUAL SHOT SPORT-NUMBERED PARTS
1
1
2
3
6
8
29
5
6
10
4
4
7
7
3
2
25
5
9
Page 4/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02

1
STEP 2
3
3
2
1
1
6
2
1
19
18
6
18
19
18 14
14 18
Attach the Base Tubes (#1) with a Connector Tube (#6) using a
Bolt (#14), two Washers (#18) and a Nut (#19).
Put the Vertical Tubes (#2) into the Base Tubes (#1), then put the
Elbow Tubes (#3) into the Vertical Tubes (#2).
Page 5/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02

Attach the Base Tubes (#1) and Vertical Tubes (#2) with a
Connector Tube (#6) using a Bolt (#14), two Washers (#18)
and a Nut (#19).
6
19 18 18
14
Attach the Extension Tubes (#4) to the Base Tubes (#1) using a Short
Bolt (#13), two Washers (#18) and a Nut (#19).
3
3
2
1
1
6
2
19 18
4
4
18
13
3
2
1
1
6
6
2
3
Page 6/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02

5
5
19
18
15
18
13
15
18
18
19
13
Take the Diagonal Tubes (#5) and telescope into full length
(Fig. 5A).
Attach the Diagonal Tubes (#5) to the outside of the
Vertical Tubes (#2) using a Short Bolt (#13), one
Plastic Spacer (#15), one Washer (#18) and
a Nut (#19) (Fig. 5B).
Attach the other end of the Diagonal
Tubes (#5) to the outside of the Forward
Tubes (#4) using a Short Bolt (#13), one
Plastic Spacer (#15), one Washer (#18)
and a Nut (#19) (Fig. 5C).
Figure 5A
Figure 5C
5
4
Figure 5B
Page 7/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02

Attach the Front Tubes (#7) to the Extension Tubes (#4) using the
spring locks (Fig. 6A).
Attach the Bottom Tube (#8)
to the Front Tubes (#7) using
the spring locks (Fig. 6B).
Attach the Lean Bar (#9) to the top of the Front Tubes (#7)
using the spring locks.
8
7
4
7
Figure 6A
Figure 6B
9
8
Page 8/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02

Attach the Rims (#11) to the Backboard (#25) and the Backplates
(#12) using Bolts (#17), two Washers (#18) and Nuts (#19).
Attach the Scoreboard (#26) onto the rear of the Backboard (#25)
using the Short Bolts (#27).
19
19
18
12
18
25
11
18
17
17
27
25
18
Page 9/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02
26

Attach the Paddles (#28) to the Backboard (#25) using Bolts (#17),
two Washers (#18) and Nuts (#19). Plug the Paddles jacks into the
corresponding ports on the Scoreboard (#26).
Attach the Nets (#20) to the Rims (#11).
18
25
18
18
28
28
18
18
18
19
19
Page 10/17
WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU#PASDSS19-02