Pope PATH SWEEP 101BL12V User manual

PATH SWEEP
12V Cordless Blower
Model Number 101BL12V
Operator’s Manual
WARNING
To reduce the risk of injury, the user must read and
understand the Operator’s Manual. Save this manual.
!

Introduction
Thank you for purchasing a Pope product.
We would like you to be completely satisfied with your new product, so feel free to contact Pope
for help with any information you require.
Pope’s Customer Service Centre Number is 1300 134 880.
Please read this manual carefully to learn how to operate and maintain your product correctly. It
is important to consult these instructions in order to acquaint yourself with the tool, its proper use
and safety precautions.
Please observe the general maximum operating times as well as local regulations for tool
operation.
Should this product require repair under the conditions of the warranty, please return it to the
place of purchase. You will need to provide proof of purchase to obtain a free of charge repair,
or a replacement.
Keep these instructions in a safe place.
For your records, attach your receipt here.

SAFETY RULES
WARNING
Read and understand all instructions when using the Pope Cordless
Path Sweep. Basic precautions including the following should be
followed to reduce the risk of a hazardous situation. Read all of these
safety instructions carefully before you use the Power Sweep. Make sure
that you are familiar with the controls and forces generated when using
this product.
Physical Condition of the Operator. Do not operate this product when tired, ill or under the
influence of alcohol, drugs or medication.
Clothing Requirements. Always wear long heavy pants, boots and gloves. Do not wear
loose clothing, jewellery, short pants, sandals or go barefoot. Secure hair so that it is above
shoulder level to avoid entanglement in moving parts.
Protective Accessories Requirements. Wear safety eye protection when operating this
product. Wear hearing protection during extended periods of operation.
Conditions of Product Before Use. Inspect condition of the product before use. Only
operate the tool when it is in good working order and is not damaged in any way. Damaged
parts have to be replaced immediately by a qualified electrician. Never use the tool if any of
its safety devices or guards are damaged or missing.
.Never operate the product with any air openings or vents blocked. Keep
free from dust, lint, hair and anything that may reduce air flow.
Proper Stance. Keep firm footings and balance. Do not overreach.
Dangerous Environments. Do not use the product in damp or wet locations. Do not
expose the tool to wet conditions. Do not leave the product outdoors.
Work Area. Clear the area of bystanders, pets and children as there may be a risk to
bystanders from thrown objects. If you are approached while operating the product, stop the
motor.
Condition of the Path Sweep before Use. The Path Sweep shall be assembled according
to the manufacturer’s instructions. Failure to use the proper parts may cause product failure
or increase the risk of injury to the user.
Use the Right Product. Do not use it for any other purpose.
Use of Product. Never allow children or infirm persons to use the tool. Never allow other
persons who are not familiar with the operating instructions to use the tool. Never use the
tool when there are people, particularly children or pets nearby.
Responsibility. The user is responsible for any accidents or hazards suffered by third
parties or their property.
Maintenance. Switch off the tool prior to any inspection.
Plugs. Plug connections must have earthing contacts and be protected from water.
Read and understand all instructions. Failure to follow all instructions may result in
•
•
•
•
•
•
•
•
•
•
•
•
•
•
!

Applications
Use this product for the following applications:
The Pope Cordless PATH SWEEP should be used for light sweeping applications on hard
surfaces such as paths, pavers, decking and driveways. Removal of wet debris or debris from
grass may be difficult.
The product is designed to be used around the home and should only be operated within its
design limitations. Tools of this category which are designed for home and garden use should
only be operated in such settings. Tools of this category are not suitable for use in public
facilities, parks and sports centres, on farms or in the forestry sector.
Unpacking
Carefully remove the product from the box.
Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated
the product.
If any parts are damaged or missing please call the Pope Customer Service Centre on
1300 134 880 for assistance.
Packing List
Blower unit with 12V Lead Acid Battery (1)
Blower Tube (1)
Plug Pack Charger (1)
Operator’s Manual (1)
Specifications
Name: Pope Cordless Path Sweep
Model Number: 101BL12V
Power Input: 12V
Battery Charge Time: 3-5 Hours
Charger Input: 240VAC 50 Hz
Air Speed: Up to 180 km/hr

ASSEMBLY
Parts Identification
Handle
Start Stop Switch
Front Tube
Tube Release Button
DC Jack
Battery Pack
1.
2.
3.
4.
5.
6.
Assembly Prior to Use
The Pope Cordless Path Sweep requires minor assembly prior to use.
Follow these steps to assemble the
Cordless Path Sweep:
Ensure the Path Sweep is
switched off.
Insert the blower tube into the
blower unit until a “click” is
detected. There should be no
gap between the edge of the
two parts.
1.
2.

OPERATION
Preparing the Pope Cordless Path Sweep for use - Charging the Battery Pack
Follow these instructions to charge the battery:
Plug the charger into the Path Sweep using the small plug into the rear of the Path Sweep
(the blower is now on charge mode).
Plug the power unit into the wall outlet and switch on.
The initial charge should be at least five (5) hours.
1.
2.
3.
WARNING
Never operate the Path Sweep while the battery is charging and is still
connected to the mains power.
Using the Pope Cordless Path Sweep
Follow these instructions to use the Pope Cordless Path Sweep:
Turn off the power at the wall socket.
Remove the charging plug from the rear of the Path Sweep.
With the blower nozzle directed away from any persons or pets or any other dangerous
conditions, slide the ON/OFF switch fully forward to the ON position.
The blower will remain running without having to maintain forward pressure on the switch.
Note: The symbol “I” can be observed at the rear of the switch when the switch is in the ON
position.
To turn the Pope Path Sweep off:
Slide the switch fully to the back of the Path Sweep.
The letter “O” can be observed in the switch.
1.
2.
3.
4.
•
•
WARNING
DO NOT leave the Path Sweep unattended or in a position where it may
be restarted by persons who are not familiar with the safety operation rules
outlined in this manual.
!
!

MAINTENANCE
Follow these maintenance and storage guidelines for safety and optimum life
of your unit.
Battery Charging
Do not charge the battery when the temperature falls below 0oC or exceeds 40oC. Failure to
observe this may cause damage to the battery pack.
The battery has been shipped with a low charge. Please ensure that the battery is charged
fully before use.
Avoid charging the battery for any less than the complete charge time required. Ensuring the
battery is fully charged with each use will maximise the life of the battery and provide optimum
performance.
In the interests of longer battery life, never charge the battery longer than necessary.
The battery only reaches full performance after multiple charges and discharge cycles.
Only charge the battery indoors.
Never use any other charger except the one supplied with this unit. Failure to do this can result
in damage to your battery, your charger or may result in fire, electric shock or electrocution.
Never try to remove the battery from the blower unit. This unit has been designed to be
permanently connected to the blower and must NOT be removed.
Maintenance Guidelines
Do not use solvents or cleaning fluids to clean your product. Use a damp cloth to wipe over
the unit if necessary.
Check vents before use to ensure they are free from dust or dirt build up.
Ensure all screws are tight to keep your product in a safe working condition.
Under no circumstances hose out any part of the blower with water or liquid.
Where required, only have your Path Sweep inspected and maintained by qualified service
personnel. Do not attempt to repair the machine unless you are qualified to do so.
Storage
Store the Path Sweep in a dry place out of the reach of children.
Never store your blower with the charger permanently connected.
Disposal
The battery in this unit is a lead acid battery. Never throw it away in household garbage or
incinerate. In order to care for you and the environment, please recycle or dispose of this product
in an environmentally friendly way.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

WARRANTY
You must keep your receipt as proof of purchase for return of the product
under the terms of this warranty.
Your Pope product is guaranteed to be free from defects in materials or workmanship for a period
of 24 months from the date of purchase provided the product has been used in accordance with
the manufacturer’s recommendations.
If the product becomes defective within the warranty period we guarantee to either replace or
repair the product at our option, provided that:
The product is returned to the place of purchase with evidence of purchase, ie the receipt.
The product is used for general household use only, where household use means use of
the product on the same lot as your home. Use at more than one location is considered
commercial use and no warranty applies for commercial use.
The product has not been used for hire purposes.
Repairs, alterations or modifications have not been attempted to the product.
The failure is not as a result of normal wear and tear.
Failures due to the following are not covered:
Replacing worn or damaged blades, nylon line or chains or cables damaged in storage or
during use. These are regarded as replacement items which wear during normal usage.
Failures as a result of sudden impact or obvious abuse.
Failures due to usage not in accordance with instructions and recommendations contained in
this manual.
To the fullest extent permitted by law, Toro Australia Pty Ltd is not liable for any indirect,
incidental, or consequential loss or damage in connection with the use of the Pope product
covered by this warranty or for any cost or expense of providing substitute equipment or service
during any period of malfunction or non-use pending completion in repairs under this warranty.
The above warranty does not exclude any condition or warranty implied by the Trade Practices
Act 1974 or any other relevant legislation which implies any condition which cannot be excluded.
Pope is a Registered Trademark of Toro Australia Pty Ltd
53 Howards Road, Beverley, South Australia, 5009
Made in China to Pope’s Specifications
•
•
•
•
•
•
•
•