PORSCHE DESIGN PDB90 User manual

User manual
Soundbar PDB90

English
1
Contents
1 Important 2
Safety 2
Care for your product 3
Care of the environment 3
Compliance 4
2 Your Soundbar 5
Main unit 5
What’s in the Box 5
Connectors 6
Remote control 6
Prepare the Remote Control 7
Placement 8
Wall mount 8
3 Connect 9
Dolby Atmos® 9
Connect to HDMI Socket 10
Connect to Optical Socket 10
Connect to Power 11
4 Use your Soundbar 11
Turn ON and OFF 11
Automatically wake up 12
Auto Standby 12
Select Modes 12
Adjust the Volume 12
Surround sound mode. 12
Factory Reset 12
Setup Menu 13
14Bluetooth Operation
14
OPTICAL / HDMI Operation
15USB Operation
6 16
7 Troubleshooting 17

2
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Safety
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
• Before you make or change any
connections, make sure that all devices are
disconnected from the power outlet.
• Never expose the product andaccessories to
rain or water. Never place liquid containers,
such as vases,near the product. If liquids
are spilt on or into the product, disconnect it
from the power outlet immediately. Contact
Consumer Care to have the product checked
before use.
• Never place the product and accessories
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Battery (battery pack or batteries
installed) shall not be exposed to excessive
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
•
the type plate at the back or bottom of the
product.
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on
the back or bottom of the product. Never
connect the product to the power outlet if
Risk of injury or damage to this product!
• For wall mounting, this product must
be securely attached to the wall in
accordance with the installation
instructions. Use only the supplied wall
mount bracket (if available). Improper wall
mounting may result in accident, injury
or damage. If you have any query, contact
Consumer Care in your country.
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.

English
3
Risk of overheating!
•
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaine, etc.).
• CAUTION: Danger of explosion if batteries
are incorrectly replaced. Replace only with
the same or equivalent type.
• Remove batteries if they are exhausted or
if the remote control is not to be used for a
long time.
• Batteries contain chemical substances,
they should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
you replace the battery.
• If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
This is CLASS II apparatus with double
insulation, and no protective earth
provided.
Care for your product
Care of the environment
Disposal of your old product and battery
Your productis designed and
manufactured with high quality materials
and components, which can be recycled
and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
This symbol means that the product
contains batteries covered by European
Directive 2013/56/EU which cannot be
disposed of with normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct disposal
of old products and batteries helps prevent
negative consequences for the environment
and human health.
Removing the disposable batteries
To remove the disposable batteries, see battery
installation section.
Compliance
This product complies with the radio
interference requirements of the European
Community.
Hereby, TP Vision Europe B.V. declares that this
product is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU.
https://www.porsche-design.com.

4
Français
Déclaration de la FCC :
Remarque: cet équipement a été soumis à des essais et a
été déclaré conforme aux limites stipulées pour un appareil
numérique de classe B, conformément aux spécications
de la partie 15 du règlement de la FCC. Ces limites ont pour
but d’assurer une protection raisonnable contre le brouillage
nuisible dans une installation résidentielle. Cet équipement
produit, utilise et peut émettre de l’énergie en radio
fréquence et, s’il n’est pas installé et utilisé conformément
aux directives, il peut causer un brouillage nuisible dans les
communications radio.
Cependant, il est impossible de garantir qu’aucun brouillage
ne se produira dans une installation particulière. Si cet
équipement cause un brouillage de la réception de radio ou
de télévision, ce qu’il est possible de déterminer en éteignant
puis en rallumant l’équipement, l’utilisateur est prié d’essayer
de corriger le brouillage au moyen de l’une ou de plusieurs des
mesures suivantes :
- Réorienter ou déplacer l’antenne de réception.
- Augmenter la distance entre l’appareil et le récepteur.
- Brancher l’appareil à une prise sur un circuit diérent de
celui sur lequel le récepteur est branché.
- Consulter le revendeur ou un technicien radio/ TV
expérimenté.
Cet appareil est conforme à la partie 15 des règles de la
FCC. Son fonctionnement est soumis aux deux conditions
suivantes :
(1) ce dispositif ne peut pas causer d’interférences
nuisibles et
(2) cet appareil doit accepte r toute inter férence reçue, y
compris les interférences qui peuvent causer un mauvais
fonctionnement.
IC-Canada : CAN IECES-3(B)/NMB-3(B)
L’émetteur/récepteur exempt de licence contenu dans
le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
FCC & IC Avertissement :
- Les changements ou modications de cet appareil non
expressément approuvées par la partie responsable de la
conformité pourraient annuler l’autorisation de l’utilisateur à
utiliser l’équipement.
- Pour rester en conformité avec les consignes
d’exposition aux RF, placez le produit à au moins 20
cm des personnes proches.
English
FCC Statement :
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipmentdoes cause harmful
interference to radio or television reception, which can be
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
-
from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
IC-Canada : CAN IECES-3(B)/NMB-3(B)
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
FCC & IC Warning:
- Changes or modications to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
- This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.

English
5
2 Your Soundbar
Main unit
This section includes an overview of the main unit.
1-/+ (Volume) button
Decrease/Increase the volume.
2(Play/Pause) button
Start, pause or resume play.
3(Source) button
Select an input source for the Soundbar.
Press and hold to activate the pairing
function in Bluetooth mode or disconnect
the existing paired Bluetooth device.
4(Standby-On) button
• Press the button to trun ON.
• Set is ON, press the button to switch
• Set is ON, long press the button to
*
power on.
5Display panel
6Remote Control Sensor
• Soundbar x 1
• Remote Control x 1
( AAA Batteries x 2 )
• Power Cord * x 1
• HDMI Coble x 1
• Wall Mount kit x 1
(Wall Brackets x2, Screws x4, Dowels x2)
• User manual / Quick Start Guide /
Warranty Card / x 1
* Power cord quantity and plug type vary by regions.
Images, illustrations and drawings shown on
this User Manual are for reference only, actual
product may vary in appearance.
Remote Control
AAA Batteries x 2
Soundbar
Wall Mounting Screws Wall Bracket
Gum Cover Screws (for wall)
HDMI Cable
* Power cord quantity and plug type vary by regions.
Quick start guide
Warranty Card
4 X
Wall mount template
1
5
6
2 3 4
Power Cord *

6
Remote control
This section includes an overview of the remote
control.
1(Standby-On)
• Press the button to trun ON.
• Set is ON, press the button to switch
• Set is ON, long press the button to
2(Source)
Select an input source for the Soundbar.
Press and hold to activate the pairing
function in Bluetooth mode or disconnect
the existing paired Bluetooth device.
3
4
2
1
5
6
8
9
7
Connectors
This section includes an overview of the
connectors available on your Soundbar.
3HDMI OUT (eARC/ARC)
Connect to the HDMI input on the TV.
2HDMI IN
Connect to HDMI OUT socket of external
devices (e.g. games consoles, DVD players
and Blu-ray).
5OPTICAL
Connect to an optical audio output on the
TV or a digital device.
4USB
• Audio input from a USBstorage device.
•
1AC~
Connect to the power supply.
6AUX OUT
AUX output to SUBWOOFER for bass signal
input.
123 4 5 6

English
7
4
(Mute)
Mute or restore volume.
5
3
Navigation menu
Up: increase volume or previous menu.
Down: Reduce the volume or next menu item.
Le: Select the previous song or the next
menu in Bluetooth mode.
Right: In Bluetooth mode, select the next song,
or the upper menu.
Middle: Start, pause or resume playing in
Bluetooth mode. Conrm your selection.
•
•
•
•
•
6
(MENU)
Enter the menu settings.
Select surround sound mode.
(movie/music/voice/sports/custom).
7
(Back)
Return to previous menu. Exit menu.
8
(Sound Settings)
Select Sound Settings (Surround/Dynamic
Range control/dialogue/bass/Treble/Sync)
9
Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
• Even if the Remote Control is operated
(6m), remote control operation may be
impossible if there are any obstacles
between the unit and the remote control.
• If the Remote Control is operated near
other products which generate infrared
rays, or if other remote control devices
using infra-red rays are used near the unit,
it may operate incorrectly. Conversely, the
other products may operate incorrectly.
Replace the Remote Control Battery
1 Press and slide down from the receiver
side on the back cover to open the battery
compartment of the remote control.
2 Insert two AAA size batteries (included).
Make sure the (+) and (–) ends of the
batteries match the (+) and (–) ends
indicated in the battery compartment.
3 Close the battery compartment cover.
Precautions Concerning Batteries
• Be sure to insert the batteries with correct
positive “ ” and negative “ ” polarities.
• Use batteries of the same type. Never use
• Either rechargeable or non-rechargeable
batteries can be used. Refer to the
precautions on their labels.
•
removing the battery cover and the
battery.
• Do not drop the remote control.
• Do not allow anything to impact the
remote control.
• Do not spill water or any liquid on the
remote control.
• Do not place the remote control on a wet
object.
• Do not place the remote control under direct
sunlight ornear sources of excessive heat.
• Remove the battery from the remote
control when not in use for a long period of
time, as corrosion or battery leakage may
occur and result in physical injury, and/or
• Do not use any batteries other than those
1
3
2

8
• Do not mix new batteries with old ones.
• Never recharge a battery unless it is
Placement
For best results, place your subwoofer as shown
below.
Wall mount
Note
• Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
• Before wall mounting, make sure the wall can support
the weight of your Soundbar.
• Before wall mount, you need not remove the rubber
feet at the bottom of the Soundbar, otherwise the
• Depending on the type of wall mounting your Soundbar,
make sure that you use screws of a suitable length and
diameter.
• Please check whether the USB port on the back of the
Soundbar is connected to a USB device. If it is found
you need to use another USB device of the appropriate
size.
Suggested wall mounting height
before wall mounting the soundbar. With a
TV preinstalled, wall mount the soundbar
50mm/2.0’’ in distance from the bottom of the
TV.
1 Drill 2 parallel holes (Ø 3-8mm each
according to wall type) on the wall. The
distance between the holes should be
660mm / 26.0”.
» You can using the positioning paper
(included).
2
wall if necessary. Tighten the wall mount
brackets on the wall with screws and
screwdriver (not included). Make sure that
they are securely installed.
» Attach the wall brackets (x2) to the
wall.
3 Install the wall mounting screws into the
back of the unit.
4
and slot into place.
1
~50mm/2.0"
3
3.5-4mm/0.14?0.16?
4mm/
0.16?
>25mm/0.98?
660mm/26.0"
3.5-4mm/0.14"0.16"
4mm/
0.16"
>25mm/0.98"
2

English
9
3 Connect
This section helps you connect your Soundbar
to a TV and other devices, and then set it up.
For information about the basic connections of
your Soundbar and accessories, see the quick
start guide.
Note
•
at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Dolby Atmos®
Dolby Atmos gives you amazing experience you
have never heard before by overhead sound,
and all the richness, clarity, and power of Dolby
sound.
For using Dolby Atmos®
Dolby Atmos® is available only in HDMI mode.
For the details of the connection, please refer to
“HDMI Connection”.
1 To use Dolby Atmos® in HDMI / HDMI ARC
mode, your TV has to support Dolby Atmos®.
2 Make sure that “No Encoding” is selected
for bitstream in the digital audio output of
the connected external device (e.g. Blu-
ray DVD player, TV etc.).
3 While entering Dolby Atmos / Dolby
Digital / PCM format, the soundbar will
show DOLBY ATMOS / DOLBY AUDIO /
PCM AUDIO / DOLBY SURROUND.
Note
• The full Dolby Atmos experience is only available when
the Soundbar is connected to the source via a HDMI
2.0 cable.
• The Soundbar will still function when connected via
other methods (such as a Digital Optical cable) but
these are unable to support all of the Dolby features.
Given this, our recommendation is to connect via HDMI,
in order to ensure full Dolby support.
Connect to HDMI Socket
Some 4K HDR TVs require the HDMI input
or picture settings to be set for HDR content
reception. For further setup details on HDR
display, please refer to the instruction manual
of your TV.
Option 1: eARC/ARC (Audio Return
Channel)
Your Soundbar supports HDMI with Audio
Return Channel (eARC/ARC). If your TV is HDMI
ARC compliant, you can hear the TV audio
through your Soundbar by using a single HDMI
cable.
1 On your TV, turn on HDMI-CEC operations.
For details,see the TV user manual.
• The HDMI ARC connector on the TV
see the TV user manual.
2 Using a High Speed HDMI cable, connect
the HDMI OUT (eARC/ARC)-TO TV
connector on your Soundbar to the HDMI
ARC connector on the TV.
HDMI eARC/ARC
OUT
eARC / ARC
HDMI ARC

10
1 Using an optical cable, connect the
OPTICAL connector on your Soundbar to
the OPTICAL OUT connector on the TV or
other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Connect to Power
• Before connecting the AC power cord,
ensure you have completed all other
connections.
• Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or the
underside of the unit.
1 Connect the mains cable to the AC~
Socket of the unit and then into a mains
socket
2 Connect the mains cable to the AC~
Socket of the subwoofer and then into a
mains socket.
* Power cord quantity and plug type vary by
regions.
For EU
For UK or
Note
• Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to On.
•
depending on the TV. For details about ARC function,
please refer to your TV owner’s manual.
• Only HDMI 1.4 compatible cables can support the ARC
function.
Option 2: Standard HDMI
If your TV is not HDMI ARC-compliant, connect
your soundbar to the TV through a standard
HDMI connection.
1 Use an HDMI cable to connect the
soundbar’s HDMI IN socket to your
external devices (e.g. games consoles,
DVD players and blu ray).
2 Use an HDMI cable to connect the
soundbar’s HDMI OUT (eARC/ARC) socket
to the TV’s HDMI IN socket.
Connect to Optical Socket
HDMI
eARC / ARC
HDMIOUT
Blu-ray Player / DVD Player /
Recorder / Set-top Box...
HDMIIN
OUT
eARC / ARC
HDMI IN
OPTICAL OUT
OPTICAL
OPTICAL

English
11
4 Use your
Soundbar
This section helps you use the Soundbar to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch the Soundbar to the correct source
for other devices.
Turn ON and OFF
•
main socket, the unit will be in STANDBY
mode. The STANDBY indicator will light up
white.
• Press the button to trun ON
• Set is ON, press the button to switch
• Set is ON, long press the button to
Automatically wake up
• If a TV or an external device ( for HDMI
socket) is connected, the unit will switch
on automatically when the TV or the
external device is switched on.
Auto Standby
The unit automatically turns to Standby mode
unit is disconnected (Or USB, BT function bit
playback pause), switched o.
•
the mains plug from the mains socket.
•
energy when not in use.
Select Modes
1 Press the button repeatedly on the
unit or on the remote control to select the
OPTICAL, HDMI ARC, HDMI, BT, USB
mode.
» The selected mode will show on the
display.
Mode Display
USB
BT
BT
OPTICAL
OP T
HDMI ARC
HDMI eARC
AR C
E - ARC
HDMI IN
H D MI
Adjust the Volume
Adjust the Soundbar’s Volume
1 Press +/- (Volume) to increase or
decrease a volume level.
• To mute sound, press Mute.
• To restore the sound, press Mute again
or press Vol+/Vol- (Volume).
Surround sound mode.
Experience an immersive audio experience with
surround modes.
1 Press the button on the remote control
• On: Create a surround listening
experience.
• : Two-channel stereo sound. Ideal
for listening to music.

12
Factory Reset
Reset device to default setting
• If the product does not respond to operation,
you can reset the product to the factory
default Settings.
In standby mode, hold down the volume +/ -
button for 8 seconds until RESET appears on
the display panel.
Aer factory Settings are restored, the
product will automatically shut down and
restart.
•
•
Setup Menu
settings to provide you with an even better
experience.
1 Press the (MENU) button on the
remote control to open the menu.
2 Select the content with Down / Up
on the remote controller
Display Description
Adjust the SUB Level
Adjust the CTR Level
Adjust the SIDE L Level
Adjust the SIDE R Level
Start pairing
Set display brightness
Set display ON/OFF
Set AUTO STNBY ON/OFF
Start FW upgrade
3 Press Middle to conrm your selection.
4 Change the initial values for each of the
settings with the cursors Le/Right.
5
Press Middle to conrm your selection.
• To return to the previous screen / exit the
settings, press (Back).
• If no button is pressed within 5 seconds,
the system will automatically exit the
menu.
EQ
Several preset EQ modes are available:
MOVIE, MUSIC , VOICE, SPORT, CUSTM.
» By default, the EQ is set to MOVIE.
BASS/TREBLE
Adjust the Bass/Treble Level.
» bass + 5 ~ bass – 5
» treble +5 ~ treble –5
» By default, the Bass/Treble is set to 0.
Dialogue mode
Dynamic Range control (DRC)
Dialogue mode improves the clarity of dialogue
and voices in movies, TV shows and podcasts
by adjusting the tonal balance of the product.
Press the selected DIALOGUE repeatedly,
then press the le and right navigation buttons
to adjust the DIALOGUE level.
You can apply dynamic range control to
dolby digital orbit. Press 3 repeatedly to
select DRC, then press the le and right
navigation buttons to turn DRC on, o,
or set to automatic.
If the audio and video are not synchronized,
delay the audio to match the video.
Press to select SYNC repeatedly, then press
the le and right navigation buttons to
synchronize audio and video.
Synchronize Video and Audio
DIMMER
Set display brightness.
» LOW, MID, HIGH
» By default, the dimmeris set to HIGH.
BT PAIR
SUB
CTR
SIDE L
SIDE R
AUTO STNBY
UPGRACE

English
13
Note
• The full Dolby panorama sound experience can only be
achieved when connected to the source via an HDMI 2.0
cable.
• Aer being connected by other means (for example,
digital ber cable), the product can still be used, but
does not support all dolby features. To ensure full
Dolby support, it is strongly recommended that you
connect via HDMI.
Note
• For non-HDMI connections (e.g., Bluetooth, ber, and
coax connections), only very little is possible. Limit the
upper surround sound height.
Dolby Sound
panoramic panoramic view this product built-in
multiple support dolby sound speaker, in addition
to delivering 5 channel sound to horizontal
direction, can still up sound, and through the
reection of the ceiling to create and recreate
extremely lifelike set-top sound, make the listener
in all-round (3 d) surrounded by sound, provide
more strong real enjoy hearing.
•
•
•
•
•
Depending on your listening environment and
personal preference, adjust the upper surround
height according to to achieve
dierent sound eects.
ATMOS 00: No upper surrounding height.
ATMOS 01: Low ambient height.
ATMOS 02: Chinese surrounding altitude.
ATMOS 03 Zenisk Surrounding altitude.
Listen to dolby panorama sound
The height of the product should be between
0.7 and 0.8 meters.
The Ceiling height appropriate is between 2.8
meters to 3 meters.
The ceiling is advisable with do not contain
sound absorbing material.
The ceiling surface is at, do not have protruding
thing advisable.
The following two use cases achieve the best
sound for Dolby Panorama sound.
•
•
•
•
The player needs to play a dolby panorama movie.
The PLAYER's HDMI audio output format should
be set to source code output (bitstream output).
Connect the player to the product through its
HDMI IN port.
HDMI high-speed cable.
Optimized Dolby panoramic sound Settings
Through a Blu-ray player
•
•
•
•
•
•
•
•
The TV needs to broadcast a dolby panorama
sound lm.
TV needs to support dolby panorama sound
source output (bitstream output)
Through the HDMI OUT port of the product,
connect the TV to the product.
HDMI high-speed cable.
Through the television
2.8~3m
0. 7~0.8m
2~3m

14
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
device through your Soundbar speakers.
What you need
• A Bluetooth device which supports
Bluetooth version as 5.0 + EDR.
• Compatibility with all Bluetooth devices is
not guaranteed.
• The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1 Press the button repeatedly on the
unit or on the remote control to switch the
Soundbar to Bluetooth mode.
» NO BT is displayed on the display
panel.
2 On the Bluetooth device, switch
on Bluetooth, search for and select
Porsche Design PDB70 to start
connection (see the user manual of
the Bluetooth device on how to enable
Bluetooth).
3 Wait until you hear the voice prompt from
the Soundbar.
» If the successfully connected, BT is
displayed on the display panel.
4
Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
• If your Bluetooth device supports
you can press / to skip to a track,
or press to pause/resume play.
5 To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
• The music streaming may be interrupted by obstacles
between the device and Soundbar, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
• Compatibility with all Bluetooth devices is not
guaranteed.
• If you want to connect your Soundbar with another
Bluetooth device, press and hold on the remote
control to disconnect the currently connected
Bluetooth device.
OPTICAL / HDMI Operation
Ensure that the unit is connected to the TV or
audio device.
1 Press the button repeatedly on the
unit or on the remote control to select
the OPTICAL, HDMI ARC, HDMI
mode.
2 Operate your audio device directly for
playback features.
3 Press the VOL +/– buttons to adjust the
volume to your desired level.
Tip
• While in OPTICAL/HDMI ARC mode, if there’s no sound
you may need to activate PCM or Dolby Digital Signal
output on your source device (e.g. TV, DVD or Blu-ray
player).
• The unit may not be able to decode all digital audio
formats from the input source. In this case, the unit
will mute. This is NOT a defect. Ensure that the audio
setting of the input source (e.g. TV, game console, DVD
player, etc.) is set to PCM or Dolby Digital (Refer to the
user manual of the input source device for its audio
setting details) with HDMI / HDMI ARC /optical input.
• In HDMI mode, when the DOLBY ATMOS audio format
is entered, the Soundbar display shows DOLBY ATMOS.
• When inputting Dolby DIGITAL audio format, When
Dolby Surround is turned on, the Soundbar display
shows DOLBY SURROUND. Dolby Surround is turned
• When the DOLBY DIGITAL audio format is entered, the
Soundbar display shows DOLBY AUDIO.
• When the PCM audio format is entered, the Soundbar
display shows PCM AUDIO.
• When entering non-PCM or DOLBY DIGITAL audio
formats, if there’s no sound output from the unit and
the display show ERROR.

15
USB Operation
Enjoy audio on a USB storage device, such as an
1 Insert the USB device.
2 Press the button repeatedly on the unit
or on the remote control to select the USB
mode.
3 During playback:
Button Action
Start, pause or resume play.
Skip to the previous or next track.
Tips
• The unit can support USB devices with up to 32 GB of
memory.
• This unit can play MP3 / WAV / FLAC.
• Support a USB port: 5V , 500mA.
Down / Up
Middle

16
English
6 Product
specications
Note
•
without notice.
Bluetooth
•
•Bluetooth Version: 5.0
•Frequency Band/Output Power:
2400 MHz ~ 2483.5 MHz / ≤ 20dBm
Main Unit
•Power Supply: 100-240V~ 50/60Hz
•MAX Output Power by speaker:
316W (RMS)
•Power Consumption: 25 W
•Standby Consumption: < 0.5 W
•USB: 5V 500mA
•Frequency Response: 60Hz - 20KHz
•Speakers Impedance: 8Ω + 8Ω + 4Ω
•Dimension (W x H x D ): 1200 x 210 x 75 mm
•Weight: 8.69 kg
• Operating Temperature: 0°C - 45°C
Remote Control
• Distance/Angle: 6m/30°
• Battery Type: AAA (1.5V x 2)
Supported Audio Formats
•
Dolby Digital, Dolby Digital plus,
Dolby True HD, Dolby Atmos®,
LPCM 2ch/Mch , Dolby MAT.
•
Dolby Digital, Dolby Digital plus,
Dolby True HD, Dolby Atmos®,
LPCM 2ch/Mch , Dolby MAT.
• OPTICAL
Dolby Digital, Dolby Digital plus, LPCM 2ch
• BLUETOOTH
SBC
• USB
MP3, WAV, FLAC

17
7 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem.
No power
• Ensure that the AC cord is properly
connected.
• Ensure that there is power at the AC outlet.
• Press standby button on the remote control
or Soundbar to turn the Soundbar on.
No sound
• Increase the volume. Press Volume Up on
the remote control or on the Soundbar.
• Press MUTE on the remote control to
ensure the Soundbar is not muted.
•
input source.
• When using either of the Digital input, if
there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other
source, some TVs do not pass through
digital audio.
• Your TV may be set to variable audio
setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual
for more detailed information.
• If using Bluetooth, ensure that the volume
on your source device is turned up and that
the device is not muted.
Remote control does not work
• Before you press any playback control
• Reduce the distance between the remote
control and the unit.
• Insert the battery with its polarities (+/-)
aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the
sensor on the front of the unit.
unit on my Bluetooth device
• Ensure the Bluetooth function is activated
on your Bluetooth device.
• Re-pair the unit with your Bluetooth
device.
one of the ERPII standard requirement
for saving power
• When the unit’s external input signal
level is too low, the unit will be turned
increase the volume level of your external
device.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or
under license from DTS Licensing Limited (for all other companies). DTS, Play-Fi, and the DTS Play-Fi logo are registered trademarks or trademarks
of DTS, Inc. in the United States and other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED.
The Wi-Fi CERTIFIED™ Logo is a registered trademark of Wi-Fi Alliance®.
ssory has been
formance
standards.
Apple® and AirPlay® are trademarks of Apple Inc., registered in the U.S. and other countries.
Google, Google Play and Chromecast built-in are trademark of Google LLC. Google Assistant is not available in certain languages and countries.
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured
rved.
s of HDMI
Licensing Administrator, Inc. in the United States and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding
Limited is under license. Other trademarks and trade names are those of their respective owners.