Posturite JT100 User manual

JT100 Assembly Guide
How to assemble your JT100
Key Information
2 Person Assembly Recommended.
Three Bolt Assembly.
1 x Allen Key (supplied) required for assembly.
This product can be assembled within 10 minutes.
This product is rated as EASY to assemble.
Check Chair Structure Every 3 Months for Max
Stability.
Please note that this product will be heavy when
assembled. Please ensure that if you need to lift or
carry this product that you do not do this by yourself.
Locate the Gas Lift
1
Remove the 5 star base from the box
and place it down on the floor. Remove
the gas lift from the box and firmly push
it into the hole located in the centre of
the 5 star base. Please ensure that the
gas lift is located securely before
continuing to step 2.
Connect back to seat
2
Remove the seat assembly from the box
and rest upside down on a hard surface.
Using the bolts and allen key provided,
secure the backrest to seat assembly by
bolting through the 3 locating holes in
underseat mechanism into threaded
holes in metal black bar.
Connect chair assembly to base
3
Turn the completed chair top section
back over and carefully locate the top of
the gas lift into the circular hole in the
centre of the under-seat mechanism.
Your product is now assembled. Please
ensure that all bolts are tight before
using your product.

JT100 Mechanism User Guide
How to use your JT100 Mechanism
Synchronised Body Responsive Mechanism
Simplistic controls located all on one side make this mechanism really easy to use and ultra ergonomic. This quick and easy
mechanism has been developed to put the user in full control of their chair, enabling them to work in free flow mode or lock the chair
into a position that is comfortable for them.
1) Adjustable Lumbar Panel
From a seated position, raise or lower the Lumbar Panel to optomise comfort and support for your lower back.
2) Seat Slide
Push and hold the button to alter the seat depth by sliding your body forward. When you are happy with the seat location release the
button to lock the chair into the desired position.
3) Back and Seat Height Adjustment
Raise the lever and adjust the height of the seat to maximise comfort. Release lever when your seat is in you preferred position.
4) Back and Seat Angle Adjustment
Push the button to set the chair in any one of the 5 locking positions, or leave the button open to operate in free float mode.